Bonnet 2x1C User Manual

BONNET GRANDE CUISINE

r

Rue des Frères Lumière - Z.I. Mitry Compans

77292 MITRY MORY cedex
Tél. [phone] - Fax. [phone]

Roll in refrigerated GN1/1 cabinet • 2x1C • BIOROLL

INOX : S230B21 ou S231B21 (with 1 right or left door)

Model 2x1C, Positive for 2 trolleys GN1/1, 1 solid door

GENERAL CHARACTERISTICS

. Roll in refrigerated cabinet with double ventilated
air flow, designed for the conservation of
refrigerated food.

. As standard the cabinet is equipped with a solid
front door.

. Gross internal caapacity: 1.9 m3
. Operating temperature : 0°C to +12°C

. Ambient temperature : +43°C Maxi

SG variant
shown with 1 front right door

CONTROL PANEL, REGULATION

Model GI shown with 2 front doors (including 1 additional)

Electronic regulato

On/Off switch

. Temperature regulator with:

Digital temperature display ;
Automatic defrosting regulation ;

Temperature alarm.
. On/Off switch with indicator.
. Door contact light switch (optional)
. Forced light switch (optional)

Forced light switch

Door contact light switch

INTERNAL ARRANGEMENT

- Can be loaded with all types of 20 level multirack trolleys (not supplied)

- Capacity 2 trolleys GN 1/1

- Useful internal dimensions (LxPxH) : 1840x515x1900 (door way 780x1900)

Code Designation Int. dimensions

(L x P x H)

S230B21 BIOROLL 2x1C St. steel 1right door 1840x515x2000 2000x813x2375 1~230V 50Hz+T 500W aM 4

S230B21S Variant without unit 2000x813x2125

S231B21 BIOROLL 2x1C St. steel 1 left door 1840x515x2000 2000x813x2375 1~230V 50Hz+T 500W aM 4

S231B21S Variant without unit 2000x813x2125

Outer dimensions

(L x P x H)

Voltage

Electric

power

Intensity

(protection)

FORM047C1/2

Compliance with standards and directives

Electric safety: EN 60 335-1
Food hygiene: NF U 60 010
Compliant with relevant European directives: CE

Technical sheet n°

6BE656179FT-0207

BONNET GRANDE CUISINE

Rue des Frères Lumière - Z.I. Mitry Compans

77292 MITRY MORY cedex
Tél. [phone] - Fax. [phone]

S230B21 : Model 2x1C St. steel 1 right door
S231B21 : Model 2x1C St. steel 1 left door

INSTALLATION

The cabinet must be installed on a flat, smooth and perfectly
horizontal floor. Seal with a bead of silicone putty on the periphery
of the appliance.

CONSTRUCTION

- Internal and external body panels in austenitic stainless steel
sheet or in white plasticised steel sheet (except the external
roof in corrosion proof galvanised sheet).

- Slatted louvered compressor cover (not supplied with the
variant without compressor).

Insulated body

- Dismountable panels assembled by hook system.

- 80mm thick expanded polyurethane foam insulation

- Break of thermal bridge between inner tank and outer
structure.

- Floor fixation belts in austenitic stainless steel sheet.

- Rounded stainless steel bottom (optional).

Door

- Clipped magnetic seal with door bottom splash band

- 2 rising hinges with stay open position and self closure to
avoid rubbing of the base seal on the floor.

- Closure ensured by central lockable handle and catch with
internal safety button of the palm type.

- Possible reversal of door opening (if undertaken on site, new
lexan labels are necessary)

ELECTRICAL CHARACTERISTICS

Voltage : 1~230V 50Hz+T
Max. power : 500W
Protection : aM 4
The appliance is delivered with a supply cable + plug.
The installer is responsible for electric overloads and faults.

REFRIGERATING CHARACTERISTICS

Refrigerating capacity : 940 W at -15/+55°C
Coolant : R404A
Load : See nameplate of the appliance

Wall model shown with: 1 front right door

Free space for 1 back door.
(1)Drainage of water from defrosting (PVC tube ∅20)
(2) Electric connection (3 m long supply cable)
(3) Refrigerating connections (SG variant)
(4) Height under evaporator housing: 1900

OPTIONS

S220B01 Right solid stainless door (right opening) S220B21 Stainless compressor cover at the back
S220B02 Left solid stainless door (left opening)
S220B08 Glazed stainless door (double glazed 485x1485) ACCESSORIES
S220B56 Rounded stainless steel bottom (2 door wall type) S220B12 Defrost water evaporation kit
S220B57 Rounded staainless steel bottom (4 door roll through type) S220B13 Defrost water lift pump
S220B10 Internal lighting (with door opening) S220B31 Internal floor finish kit (except with stainless base option)
S220B17 Forced lighting switch S220B41 External floor finish kit

Compressor : Sealed
Condenser : air ventilated
Evaporator : Double flow ventilated, treated against
corrosion
Expansion : Capillary tube (SG variant supplied with

thermostatic valve)

Water from defrosting : double drainage (1) may be

provided at the back or the right side of the
cabinet

system ensured by the installer).

(a connection trap to the public drainage

- With a glazed door, when using at +3°C, the temperature and
humidity conditions required for operation without
condensation are +25°C and 65% HR or equivalent .

PACKAGING Type

On a pallet a polyethylene sheet 260 (+15/door) 2.9 (+0.4/door) 1060 2150 1255 (+160/door)

Open crate version 270 (+15/door) 4.2 (3.0 with 1 door) 1120 2210 1775 (1275 with 1 door)

This document is not contractual - BONNET GRANDE CUISINE reserves the right to improve and modify products without previous notice.

FORM047C2/2

Gross weight (kg) Volume (m3) Width Length Height

6BE656179FT-0207