Bonnet 1x1C User Manual

BONNET GRANDE CUISINE
p
Rue des Frères Lumière - Z.I. Mitry Compans
77292 MITRY MORY cedex Tél. 01 60 93 70 00 - Fax. 01 60 93 70 43
Heated roll in cabinet GN2/1 1x1C BIOROLL
S251B11
Model 1x1C, 1 trolley GN2/1, 1 solid door
GENERAL CHARACTERISTICS
Heated cabinet for professional use designed for keeping convenience food at +85°C. Gross internal capacity: 1 400 dm³. Heating system with double flow air circulation. To prevent food from drying and keep optimum moisture, a water receiver is housed in a casing placed on the side panel of the cabinet (available on option).
Open door with trolley and
tional moistening system
o
CONTROL PANEL, REGULATION
. Control and operation ensured by electronic regulation of the smooth front microprocessor type.
Temperature
display
Indication and operation leds
. High and low temperature alarm . Manual reset safety thermostat. . Door switch to switch off heating and ventilation
automatically at each opening.
Adjustment keys
Code Designation Int. dimensions
S251B11 Heated BIOROLL 1C GN2/1 1P. 840x840x2000 1000x1138x2180 3N~400V 50Hz+T 3500 aM 6
Outer dimensions
Voltage
On/Off switch
Max. poweri
(W)
Intensity
(protection)
Compliance with standards and directives
Electric safety: EN 60 335-1 Food hygiene: NF U 60 010 Compliant with relevant European directives: CE
FORM047B1/2
Technicl sheet n°
E656180FT-0207
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I. Mitry Compans
77292 MITRY MORY cedex Tél. 01 60 93 70 00 - Fax. 01 60 93 70 43
S251B11 : Stainless heatd roll in GN2/1, 1x1C cabinet
INSTALLATION
The cabinet must be installed on a flat, smooth and perfectly horizontal surface. Seal with a bead of silicone putty at the periphery of the appliance.
CONSTRUCTION
- Internal and external panels in austenitic stainless steel.
Insulated body
- Dismountable panels assembled by hook systems.
- 80 mm thick expanded poluyerathane foam insulation.
- Break of thermal bridge between internal tank and external panels.
- Floor finish belts in austenitic stainless steel.
- Rounded stainless steel bottom (in option).
Solid door
- Clipped magnetic seal with door bottom splash band.
- Closure ensured by central lockable handle and catch with internal button of the palm type.
- 2 rising hinges with stay open position and self closure to avoid rubbing of the seal on the floor.
- Possible reversal of door opening (if undertaken on site, new lexan labels are necessary)
ELECTRIC CHARACTERISTICS
Voltage : 3N~400V 50Hz+T Max. power : 3500 W Protection : aM 6 The appliance is delivered with a supply cable + plug. The installer is responsible for electric overloads or faults. Foresee the installation of a circuit breaker or fuses.
HEATING CHARACTERISTICS
Power : 3000 W Type of resistances : Stainless steel sealed screened circular heating resistance Ventilation type : by hot air reaction moto turbine
- With glazed door, internal condensation may appear depending on the humidity rate generated by the products stored or by the use of a moistening kit.
Wall model shown with free space for back door. (1) Height under evaporator housing (1860 under turbine casing) (2) Electric connection (supply cable Lg.3M)
OPTIONS
S225B00 Solid stainless steel door (right opening) S225B10 Moistening kit S220B08 Stainless steel glazed door (right opening) S225B20 Supply 3~230V S220B50 Rounded st. steel bottom (1 door wall type) S225B21 Supply 1~230V S220B51 Rounded st. steel bottom (2 door roll through type) S220B10 Internal lighting (at door opening) S220B30 S220B17 Forced lighting switch S220B35 External floor finish kit
ACCESSORIES
Internal floor finish kit (except for optional st. steel bottom)
PACKAGING Type Gross weight (kg) Volume(m3) Width Length Height
On a pallet wrapped in a polyethylene sheet 200 (+15/door) 2.4 (+0.4/door) 1060 2150 950 (+160/door)
Open crate variant 210 (+15/door) 3.0 (1 or 2 doors) 1120 2210 1275 (1 or 2 doors)
This document is not contractual - BONNET GRANDE CUISINE eserves the right to improve or modify his products without previous notice.
FORM047B2/2
6BE656180FT-0207
Loading...