Bonide Chickweed, Clover Oxalis Killer RTU User Manual

CHICKWEED CLOVER & OXALIS KILLER

Ready-to-Use

By Isomer Specific Method, Equivalent to:

*2-Methyl-4-Chlorophenoxyacetic Acid ..... 0.604%, 0.057 lbs./gal.

**3,5,6-Trichloro-2-Pyridinyloxyacetic Acid ..0.060%, 0.006 lbs./gal.

***3,6-Dichloro-o-Anisic Acid .......................0.060%, 0.006 lbs./gal.

• kills 150+ weed types, roots and all.

• contains mcpa, triclopyr and dicamba.

• begins working overnight, rainproof in hours.

• kills tough weeds like clover, plantain,
ground ivy (creeping charlie) and spurge.

Store and transport in an upright position.

EPA Est. No. 4-NY-1
EPA Reg. No. 228-336-4

Buyers Guarantee limited to label claims.
©Bonide Products, Inc. All Rights Reserved

Distributed by
Bonide Products, Inc.
6301 Sutliff Road
Oriskany, NY 13424

It is a violation of Federal law to use this product in a manner inconsistent
with its labeling. READ ENTIRE LABEL BEFORE USING THIS PRODUCT.
USE STRICTLY IN ACCORDANCE WITH LABEL PRECAUTIONARY
STATEMENTS AND DIRECTIONS.

This product is for use on residential ornamental turf lawns only.
The maximum number of applications per treatment site is two per year.
Do not apply more than 22 gallons of product (1.5 lbs ae MCPA/acre per
year or 4 pints of product per 1,000 square feet.

Trigger Spray – Adjust spray nozzle to give coarse spray. Aim at center
of weed and spray.

After applying this product, many broadleaf weeds will begin to show visible
signs of leaf curl within a few days. One application should be sufficient.
Some hard-to-kill broadleaf weeds may require a second treatment in 3
to 4 weeks.

DIRECTIONS FOR USE

HOW TO USE

Do not use this product for controlling weeds in flower or vegetable beds
or around shrubs or ornamental plantings. Do not spray roots of desirable
trees and plants. Maximum kill of weeds will be obtained from spring or
early fall applications when weeds are actively growing. Do not use on
Carpetgrass, Dichondra, nor on lawns or turf where desirable clovers are
present.
Avoid application to Centipede or St. Augustine grasses unless turf injury
can be tolerated. Do not apply to newly seeded grasses until they have
been mowed 3 times.
Do not cut grass 1 to 2 days before and after application. Do not reseed
for 3 to 4 weeks after use.
If lawn needs watering, water thoroughly before application. Do not water
for 48 hours after application. Watering will wash off weed killing material.
Do not apply if rainfall is expected within 48 hours. Avoid fine mists. Spray
when air is calm to avoid spray drift that might injure desirable ornamental

plants. Do not apply when temperature exceeds 90˚F. Shake well before

using.

Do not allow people or pets to enter the treated area until sprays have
dried.

Avoid contact with eyes, skin, or clothing during and after application. Do
not apply this product in a way that will contact persons or pets either
directly or through drift. Keep people and pets out of the area during
application.

USE PRECAUTIONS

ENTRY RESTRICTIONS

APPLICATION RESTRICTIONS