BSM-093N3G / BSM-173N3G
BSM-183N3G / BSM-213N3G
BSM-243N3G / BSM-463N3G
BSM-553N3G
BSM-212i / BSM-242i
Contents
Safety Instructions.......................................................................................................................3
Front............................................................................................................................................4
Rear.............................................................................................................................................6
MENU Description.....................................................................................................................8
VIDEO........................................................................................................................................9
DISPLAY 1...............................................................................................................................10
DISPLAY 2...............................................................................................................................12
COLOR.....................................................................................................................................14
MARKER..................................................................................................................................15
OSD...........................................................................................................................................17
OSD 2........................................................................................................................................19
AUDIO......................................................................................................................................20
GPI............................................................................................................................................22
SYSTEM...................................................................................................................................24
USB Firmware Update..............................................................................................................26
External Remote Control..........................................................................................................27
Assignable functions are listed below.......................................................................................28
Dimensions................................................................................................................................29
Troubleshooting........................................................................................................................30
Warranty Information................................................................................................................32
Modification of Product............................................................................................................32
Caution on Menu Operation......................................................................................................32
Caution for Monitor Placement.................................................................................................32
Caution for Usage.....................................................................................................................32
2
Safety Instructions
To help avoid damaging your monitor, connect only one power (AC or DC) in
operation.
Rough handling of product may cause physical damage or malfunction.
Never insert anything metallic into the monitor openings. Doing so may create
the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified
should open the monitor’s case.
Openings in the monitor cabinet are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered.
Minimum 50cm (20 inches) room to wall is necessary to prevent overheating
when the monitor is installed to wall.
Put your monitor in a location with low humidity and a minimum of dust. Avoid
places like damp basement or dusty hallways.
Place the monitor on a solid surface and treat it carefully. The screen is made of
glass and can be damaged if dropped or sharply hit.
Do not attempt to remove the back cover, as you will be exposed to a shock
hazard. The back cover should only be removed by qualified service personnel.
Unplug the monitor power before you connect external devices to the monitor.
If your monitor does not operate normally, or if there are any unusual sounds or
smells coning from it, unplug it immediately and contact us.
Please do not disassemble the monitor. No service will be provided in that case.
Displaying fixed picture for a long time may cause an afterimage or dead spots.
To recover LCD pixels, display whole white picture on screen for a n hour or
two and pixels will be recovered.
No service will be provided for user’s own color calibration.
3
Front
[BSM-18.5” ~ 24” Front Key]
[BSM-9” Front Key]
4
[BSM-46” 55” Front Key]
1) Power
2) Menu
3) Enter
4) SDI 1, SDI 2 Input
5) HDMI/DVI Input
6) Analog
Switch analog input in the order of CVBS1 -> CVBS2 -> CVBS3 -> SVIDEO ->
YPbPr -> RGB -> VGA.
7) WF/VS
Waveform / Vectorscope display selection button.
8) Marker On/Off
9) Scan
Switch scan mode among Zero Scan, Under Scan, Over Scan, Pixel to Pixel in HD
resolution. Zero Scan, Under Scan, Over Scan, Pixel to Pixel in SD resolution.
10) H/V Delay
11) R/G/B Gray
Switch for Red/Green/Blue/Gray only.
12) Function Keys
User-assigned function keys.
13) Headphone Jack
14) Speaker
15) Aspect
Adjust aspect ratio in the order of 4:3, 16:9, Fill, Native.
16) Knob for Adjustment or Enter
Knob used to adjust Brightness / Contrast / Chroma / Phase or Enter button.
BSM-463N3G,BSM-553N3G Model are Up, Down keys used by the OSD MENU
display.
5
Rear
1,2) SDI Port
3) Component YPbPr/RGB or CVBS 1,2,3 Port
4) HDMI Port
5) DVI-I Port
6) Loop-Through Out for SDI-1/SDI-2 or YPbPr
7) AC Input
Please check Power Cord, Power Voltage, Supply power for power input are
suitable for the standard before use.
Please do not mix AC power and DC power as it may cause the defects or fire.
6
⑥
①
②
③
④
⑤
⑦
⑧
⑨
⑩ ⑪
⑫
8) DC Input
For DC power supply. Check the DC Input voltage. In case of using the Battery
power, DC 12 ~ 24V is usable.
9) Update Port
The Serial communication terminal that for changing the operating
program(Firmware) of the body or controlling the monitor.
10) Remote Ethernet Port
External control via PC is able with this port by using 'Wall Control Program'.
Firmware is also updatable through this port.
11) USB Port
USB Firmware Update Port.
12) Audio IN/OUT
Audio Line In/Out Port
7
MENU Description
General Cautions for OSD menu or Display
The menu may not be displayed even when user pressed Menu button if there's No
Signal, or in unclear signal status.
The menu selection may be saved for each input signal mode, so sometimes user
should do menu selection again.
8
VIDEO
Brightness, Contrast, Chroma, Phase, Sharpness
Adjust color representation values.
SDI 3G Mode
Turns on SDI 3G mode to accept 3G signal.
SDI Switching
Normal : Use Normal in general condition but the screen might be blinking on
screen change when you use Matrix or Routing Switcher.
Fast : Use Fast to minimize blinking on screen change.
NTSC Setup
Select IRE among 0 or 7.5 (Default)
HDMI UV Swap
Sometimes color might be swapped on some HDMI input such as PC RGB. Turn
this mode on to return to correct color.
9
DISPLAY 1
Aspect
Set the aspect ratio of the screen. 16:9, 4:3, Native(Original) are selectable.
1:1 Scan
Set this on to display picture in 1:1 pixel mapping.
Anamorphic
Set this mode to resize the screen to 3.56:1, 2.74:1, 2.59:1, 2.55:1, 2.40:1, 2.39:1,
2.35:1, 1.85:1, 1.75:1, 1.66:1, or 1.37:1
Waveform Display
Select waveform display mode. Choose Normal to analyze whole screen, choose
Line Select to analyze a specific line of the screen.
Waveform Line Select
Select the line when you select Line Select mode for Waveform display.
Waveform Select
Select waveform line to display among Y, Cb, Cr.
Waveform Intensity
Adjust color saturation of the waveform between 0 to 63.
Waveform & Vector Blend
Adjust transparency of the scope.
10
Timecode Display On/Off
Timecode Position
Set the position of timecode.
Timecode Size
Set the size of time code among small, medium, large.
11
DISPLAY 2
Exposure Range Check (Video Range Check)
Checks Y, C level and displays over-exposed or under-exposed area on screen.
The base value can be Y, Cb, or Cr.
Y Range Max / Min
Set Y range value for range check.
C Range Max / Min
Set C range value for range check.
Blink Color
The filled area color by range check can be either Black, Blue, Green or Red.
Blink Time
Set blinking time of the area between 1 to 5 seconds.
12
DISPLAY2 - FOCUS ASSIST
Focus Assist Display
Turns on Focus Assist mode. This mode can be set also by pressing Focus Assist
button in front.
Focus Assist Box
Select the size of the focus assist box.
Focus Assist Level
The sensitivity of the focus assist function can be set between 0 to 48.
Focus Assist Color
Set brush color of focus assist mode among Blue, Green, and Red.
Focus Assist Reverse
Set to draw the out-focus area instead of focus area.
Focus Assist Position
The focus area of interest, may be set other than the center.
13
COLOR
Dithering
Turn this mode on to view motion pictures smoothely when the source has low
quality.
Color Temperature
Select color temperature among 3200K, 5600K, 6500K, 9300K or USER. (Gain and
Offset menu are displayed on USER temperature only)
Red/Green/Blue Gain (USER mode only)
R,G,B gains are adjustable on User mode.
Red/Green/Blue Offset (USER mode only)
R,G,B offsets are adjustable on User mode.
14
MARKER
Marker Ratio
Select one of preset markers or user marker. To display marker, press Marker
button in front of the monitor.
Center Marker
Set preference to display center marker or not.
Safety Area 16:9
Adjust size of the safety area when marker displayed on 16:9 screen.
Safety Area 4:3
Adjust size of the safety area when marker displayed on 4:3 screen.
Marker Color
Select marker’s color among White, Red, Green, Blue, Gray and Black.
Marker Mat
Set how to display outside of the safety area. Normal, Half(Gray), Black are
selectable.
Marker Thickness
Set marker thickness between 1 to 10.
15
User Marker H1 / User Marker H2 / User Marker V1 / User Marker V2
Set user marker’s position. H1 for left, H2 for right, V1 for top, V2 for bottom. The
positions are saved as the selected marker name such as USER1.
16
OSD
OSD Display Time
Set menu display time (seconds)
MENU Position
Set menu position among Left Top, Right Top, Left Bottom, Right Bottom and
Center.
V-Chip
SD-SDI, Composite signal might contain V-Chip data. Turn this mode on to display
V-Chip information on screen.
Closed Caption
Select one of 608 Line 21, 608 VANC, 608 Transcoded, 708 to display Closed
Captions. In special condition such as menu display status, captions are not
displayed.
CC708 Service
Select one of CC service as your preference.
Service 1: general captions.
Service 2: translated captions.
Service 3,4: not assigned.
CC608 StartLine
Display line of captions are selectable by user. (e.g. 13)
17
Internal Pattern
Show internal test pattern such as color bars. Turn this mode off to display general
pictures from input port.
IMD/UMD Display
Display IMD/UMD status. The screen aspect ratio will turn to 16:9 on this mode.
IMD/UMD Color
Set IMD/UMD color.
IMD/UMD Edit
Edit IMD/UMD text.
18
OSD 2
PIP Source
Select Picture-in-Picture source.
* You can only use a combination of PIP Mode Digital Signal (Main) + Analog
signals (Sub).
PIP Mode
Large PIP, Small PIP, Side by Side can be selected.
PIP Position
Sets sub-picture position.
M ain
Su b
SDI 1 SDI 2 CVBS1
CVBS2 CVBS3 Y/C YPbPr RGB VGA D VI HD MI
SDI 1
X X O O O O X O O X X
SDI 2
X X O O O O X O O X X
CVBS1
O O X X X X X X X O O
CVBS2
O O X X X X X X X O O
CVBS3
O O X X X X X X X O O
Y/C
O O X X X X X X X O O
YPbPr
X X X X X X O X X X X
RGB
O O X X X X X X X O O
VGA
O O X X X X O X X X O
DVI
X X O O O O X X O X X
HDM I
X X O O O O X O O X X
19
AUDIO
Embedded Audio Left
Select audio channel for left (Ch 1 ~ 15)
Embedded Audio Right
Select audio channel for right (Ch 2 ~ 16)
Audio Level Meter
Turns on/off audio level meters.
Level Meter Size
Select the size of the meters : Small or Large.
Level Meter Position
Select the position of the meters : Upper or Lower.
Level Meter Direction
Select Level Meter orientation among Horizontal or Vertical.
3G Level B Audio
Select one Audio source if 3G SDI is used, which has two audio sources.
Speaker Source
Select the speaker output among Auto / SDI / Line In. For HDMI, use Auto mode.
20
Speaker Volume
Set volume of speaker.
Audio Phase Meter Display
Displays audio phase.
Level Meter SDI Channel
Select audio channel in SDI.
Peak Hold Decay Time
Adjust the decay time of the peak position.
Level Meter Type
Select Pair or Group.
21
GPI
GPI Control
Turns on/off external monitor control function.
GPI Port 1,2,3,4,5,6
Assigns each GPI port’s function. (e.g. SDI 1 input, HDMI input, Tally Red) See
EXTERNAL REMOTE CONTROLLING section for details.
Remote ID Number
Assigns the ID for the monitor to control through serial port. 0 to 99 can be
assigned.
Serial Remote
Turns serial remote function on. All front buttons are locked on this mode. To exit
from this mode, press and hold Menu button for 3 seconds.
Network Menu
To connect to a network, user should set 'Serial Remote' to Network and use this
menu. Choose DHCP (Auto IP) or Static IP here.
To use Static IP, type all the information including IP Address, Subnet Mask and
Gateway. Otherwise to use DHCP, connect network cable to a proper Router that
can handle all the connection automatically.
Connection Port
This port should be assigned to each monitor device differently to distinguish each
22
one. If you use a single monitor to control, you can leave it unchanged.
MAC Address
This address is unique address for each network device. User does not need to
change it.
23
SYSTEM
Function 1,2,3,4
Assigns a function to each function button. See FRONT section for detail.
Backlight
Set the backlight intensity from 0 to 80. An LCD panel requires more than 30
minutes to be settled to a new backlight value.
Front Button LED
Set front LEDs on/off status.
Font Button Lock
Locks front buttons not to work. Press and hold Menu button for 3 seconds to exit
from this mode.
Update Firmware
Turns update mode on. Select Serial or USB port for update. After firmware
update, the monitor should be turned off/turned on, and Factory Default should be
loaded before use.
Setup Load
Load monitor settings from Factory Default, User 1/2/3/4, or from USB memory
stick.
Setup Save
Save current monitor setting to use later. 4 settings can be saved in the monitor,
or in a USB memory stick.
24
Firmware Version
This version number is required when you request for service.
Operating Time
This indicates total hours that the monitor operated.
25
USB Firmware Update
To update your monitor's firmware, request for a new firmware file to your local
reseller or to BON Electronics.
Move the file on a USB flash memory, insert it to your monitor. Please beware the
file should be located in the root(top folder level), not in any folder.
Also, the USB flash memory should have FAT32 or FAT file system. (General USB
memory has FAT32 file system, usually)
Set Update Firmware item as USB from SYSTEM menu.
Some part of firmware cannot be updated by USB updating procedure, so please get
help from your local dealer or expert before you update firmware with USB memory.
Error Message when USB access
or file not exist
Message when file on USB
detected
You can also use Serial Port and your PC to update the firmware. Please request
for help to your local dealer or directly to BON Electronics.
26
External Remote Control
Connecting GPI Port(RJ-45)
Update Port (RJ-11)
1
2
3
4
5
6
Update (RJ-11)
Update Terminal Assignment
1 PIN NC 4 PIN
GND
2 PIN RX+ 5 PIN
TX+
3 PIN RX- 6 PIN
TX-
* Turn power off first and connect update cable when you update monitor
firmware.
Remote Control / GPI Port Pin Assignments
1
2
3
4
5
6
7
8
Remote (RJ-45)
Remote PIN Assignment
1 PIN GPI Port 1 5 PIN
GPI Port 5
2 PIN GPI Port 2 6 PIN
GPI Port 6
3 PIN GPI Port 3 7 PIN
GPI Port 7(FIXED)
(TALLY OUT)
4 PIN GPI Port 4 8 PIN
COMMON(GND)
Each pin's functionality can be assigned on OSD System Menu, GPI Control section.
Assignable functions are listed below.
27
Function Name
Description
SDI-1 Input
Switches the input to SDI-1
SDI-2 Input
Switches the input to SDI-2
HDMI Input
Switches the input to HDMI
YPbPr Input
Switches the input to YPbPr
CVBS-1 Input
Switches the input to CVBS-1
CVBS-2 Input
Switches the input to CVBS-2
CVBS-3 Input
Switches the input to CVBS-3
KEY-UP ▲
CURSOR UP on Menu Control.
KEY-DOWN ▼
CURSOR DOWN on Menu Control.
KEY- MENU
Menu On/Off
KEY-ENTER
Enter Button
Aspect
Aspect On/Off
1:1 Scan On/Off
1:1 SCAN Function On/Off
H/V Delay On/Off
H/V Delay Function On/Off
TC Display On/Off
TC Display On/Off
ALM Display On/Off
Audio Level Meters Display On/Off
Freeze On/Off
Freeze Frame On/Off
Front Button LED On/Off
Front Button LED On/Off.
Tally Red On/Off
Tally Red LED On/Off
Tally Green On/Off
Tally Green LED On/Off
28
Dimensions
BSM-093N3G
223 x 174 x 50.2 mm
(8.7 x 6.8 x 1.9 inches)
BSM-173N3G
411 x 299 x 62mm
(16.1 x 11.7 x 2.4 inches)
BSM-183N3G
438.4 x 310.8 x 66.4mm
(17.2 x 12.2 x 2.6 inches)
BSM-212i
503.6 x348.0 x 70.3mm
(19.8 x 13.7 x 2.76 inches)
BSM-213N3G
502.6 x348.0 x 70.3mm
(19.8 x 13.7 x 2.76 inches)
BSM-242i
550.6 x 408.1 x 79.3 mm
(21.6 x 16.0 x 3.1 inches)
BSM-243N3G
554.2 x 407.1 x 79.3 mm
(21.8 x 16.0 x 3.1 inches)
BSM-463N3G
1078.4 x 628.0 x 71.3 mm
(27.3 x 15.9 x 1.8 inches)
BSM-553N3G
1269.9 x 735.7 x 74.4 mm
(49.9 x 28.9 x 2.9 inches)
29
Troubleshooting
Try these if you have trouble in using the monitor. Call for Service if you can't
solve the problem even after you tried these solutions.
Symptom Solution
Power isn't turned on
Check Connectivity of Power Cable between Outlet and the Monitor.
Press and Hold Power button for more than one second.
Try with Other Monitor or Electric Device using the same Power
Cable.
Screen is Black and All Button
Lights are On
in startup process
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
Screen is Black on Startup and
there's neither BON Logo nor "No
Signal" Display, but Buttons are
Working
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
There's a delay in BON Logo
Display on Startup
It is normal and No Reaction Required.
BON Logo appeared on Startup, but
No Screen Output when Input Signal
Connected
Remove Input Cable and Check if "No Signal" appears on Screen.
- restart the Monitor if you can't see "No Signal"
- Make Monitor "Factory Default" and Try again and Try again
- Check the Cable Connectivity
- Try with Different Cable
- Check the Input Format and Frequency
- Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
"No Signal" appears on the Screen
Check the Input Selection.
Make Monitor "Factory Default" and Try again.
Try with Different Input Cable.
Check the Cable Connection.
Check if the Input Format and Frequency is Supported.
Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
Strange Color on BON Logo on
Startup
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
30
the Startup Logo Color was ok but
Strange Color on Active Screen
Make Monitor "Factory Default" and Try again.
Select Test Pattern(Internal Pattern) in the menu and See if R,G,B
Color is Correct.
Check the Input Selection.
Try with Different Cable.
Check if Each Cable is correctly Connected when you use
Component as Input.
Screen Position Mismatch
Make Monitor "Factory Default" and Try again.
Reconnect the Power and Restart the Monitor.
Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
No Audio Output
Check if the Volume level is 0.
Display the Audio Level Meters and See its output.
Colors look different between
different models
Give your Monitor 1 hour warmup time.
Because Different Panels have different Characteristics, Colors
might look Different.
Colors look different between same
models
Give your Monitor 1 hour warmup time.
Same Panels are not exactly same but they have a tolerance range
among them by the Panel Manufacturer, so Colors might look
Different.
* The tolerance range is in Panel Standard Document included in CD
31
Warranty Information
Free Service
If the product needs to be repaired in 12 months from the purchase.
Exceptions
damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external
causes
damage caused by service performed by anyone who is not an authorized service provider
damage to a product that has been modified or altered without the written permission of BON
Service to be Charged
If the product needs to be repaired after 12 months from the purchase.
Modification of Product
Dimensions, specifications or design of the product are subject to change without prior notice for
product improvement.
Caution on Menu Operation
OSD Menu might be freezed or broken on very high-quality or complicated pictures input. In that
case, turn off the power for 5 seconds and turn it on to make Menu works.
Caution for Monitor Placement
For long lifetime and proper operation of the monitor, all surface of the monitor should not be
blocked by any material for ventilation.
Caution for Usage
This monitor designed to be used for broadcasting purpose. Using it as PC monitor is not
recommended.
32
Corporate Headquarters
Tresebelle-Sky 2F, 1479 Gayang-2, Gangseo-gu, Seoul, South Korea
Research / Service Center
Vision Tower 7F, 1481 Gayang-2, Gangseo-gu, Seoul, South Korea
Telephone
+82 2 2659 0333
FAX
+82 2 2659 8133
Web
http://www.bon-electronics.com
Email
salesbon@bon-electronics.com
Ver. 16.0 3 . 08
33
Loading...