Bonavita BV3825B User Manual
BV3825B
1.0 L gooseneck electrical kettle
Customer assistant line:
USA 1-855- 664 -1252
READ THE MANUAL BEFORE USE AND SAVE FOR THE FUTURE REFERENCE
FOR HOUSEHOLD USE ONLY
2 years limited warranty
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
Including the following:
•
Read all instructions.
•
Do not touch hot surfaces. Use handles or knobs.
•
To protect against fire, electric shock and injury to persons, do not immerse cord,
plugs, base or kettle in water or other liquid.
•
Never leave the appliance unattended when in use. Close supervision is necessary
when any appliance is used by or near children.
•
Unplug from outlet when not in use, no water in kettle, filling water, moving kettle
and before cleaning. Allow to cool before putting on or taking o parts, and before
cleaning the appliance.
•
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Call our toll-free Customer
Assistance Number for examination, repair or adjustment.
•
Do not use a base unit other than the one supplied. The use of accessory attachments
not recommended by the appliance manufacturer may result in fire, electric shock
or injury to persons.
•
Do not use outdoors.
•
Do not let cord hang over edge of table or counter, or touch hot surfaces. Always
store excess portion of the power cord in the compartment of the base unit.
•
Electric kettle must be operated
or electric burner, or in a heated oven, or on the top of other electric appliances.
Always attach plug to appliance first , then plug cord into the wall outlet . To
•
disconnect, turn control to o, then remove plug from wall outlet.
Do not use appliance for other than intended use.
•
To avoid circuit overload, do not operate another high wattage appliance on the
•
same circuit.
•
Do not fill kettle when positioned on base. Remove all moisture on the bottom of the
body before placing it onto the power base.
•
Be aware of steam being emitted from spout or lid especially during refilling. Do not
remove lid during boiling cycle.
•
Do not use the kettle to heat anything other than water. Do not fill above the ‘’max’’
indication. If the kettle is overlled, boiling water may be ejected. The kettle is only
to be used with the base unit provided.
•
Do not insert any object into slots or holes of the kettle.
•
Scalding may occur if the lid is removed during the brewing cycles.
•
This appliance is for HOUSEHOLD USE ONLY.
on a flat surface. Do not place on or near a hot gas
SAVE THESE INSTRUCTIONS
ADDITIONAL SAFEGUARDS
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
EXTENSION CORDS
A short power-supply cord is to be provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. Longer detachable power-supply cords or
extension cords are available and may be used if care is exercised in their use. If a longer
detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the cord set or extension cord should be at least as
great as the electrical rating of the appliance, and
2) The extension cord should be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the countertop
or tabletop where it can be tripped over, snagged, or pulled on unintentionally
(especially by children).
GROUNDING INSTRUCTIONS
This appliance must be grounded while in use.
CAUTION: To ensure continued protection against risk of electric shock, connect to
properly ground outlets only.
GROUNDING INSTRUCTIONS
The appliance has a plug that looks like Figure A. An adaptor, as shown in Figure B, should
used for connecting a 3-prong grounding plug to a 2-wire receptacle. The grounding
be
tab, which extends from the adaptor, must be connected to a permanent ground such
as a properly grounded receptacle as shown in Figure C, using a metal screw.
Circuit grounding conductor
connected properly
(A)
Grounding prong
Adapter
(B)
Grounding means Cover of grounded
Metal mounting
screw
(C)
outlet box
1
2
3
4
5
6
1. Spout
2. Lid
3. Water level
4. Handle
5. I/O switch, I=on, O=o
6. Indicator light
7. Base
8. Power plug with power cord
9. Cord storage
7
8
9
A
D
G
B
E
H
C
F
I
OPERATION
Before first use
•
Remove all packaging materials, labels and/or stickers from your kettle.
•
Clean your kettle thoroughly before using for the first time (
•
Boil water at least 2 times and dispose, before boiling water for consumption.
•
Remove the kettle from the base (7). Take o the lid (2).
•
Fill the kettle with water (ill. A)
•
After lling the kettle with water, insert the lid (2) into kettle with holes facing
towards handle.
•
Connect the power plug (8) to a wall outlet (ill. B) . Press down the I/0 switch (5) to
on position to start boiling the water (ill. C).
•
The indicator light (6) lights up. After boiling is finished, the kettle turns o
automatically. Dispose of the hot water in the sink.
WARNING: Be careful when handling hot water. Danger of scalding!
•
Let the appliance cool down 1 minute before boiling water again. Repeat this
process before using water for consumption.
WARNING: Do not immerse the base (7) or the kettle in water or any liquids. This may
cause electric shock or damage the appliance.
up to the max 1.0 marking
Operating instructions
Before plugging the kettle into the wall outlet, check that the electrical circuit is not
overloaded with other appliances.
•
Set the base (7) on a flat, even and steady surface.
•
Remove the kettle from the base (7). Take o the lid (2).
•
Fill the kettle with water (ill. A) under the max 1.0 marking. Do not fill over the
max marking. See the water level (3) for adding the desired amount of water.
•
After lling the kettle with water, insert the lid (2) into kettle with holes facing
towards handle.
•
Connect the power plug (8) to a wall outlet (ill.B).
Press down the I/0 switch (5) to on position to start boiling the water (ill. C ). The
•
indicator light (6) lights up.
After boiling is finished, the kettle turns o automatically.
•
Let the appliance cool down 1 minute before boiling water again.
•
Pour the hot water into a heat resistant container (ill. D).
•
Manually interrupt the boiling process by lifting up the I/0 switch (5) to o position
•
(ill. E).
After each use remove the power plug (8) from the wall outlet (ill. F).
•
WARNING: The appliance is very hot during use. Do not touch (ill. G) . Danger of
burns!
WARNING: Never leave the kettle unattended while boiling water. Especially when there
are children nearby.
WARNING: Do not open the lid (2) while boiling water.
Cleaning).
Loading...