Displays kettle temperature in °F or °C
Displays actual kettle water temperature
Allows user to set and hold water temperature for
up to one hour
Preset temperatures for the most popular hot
beverages
Gooseneck spout for accurate pour control
Easy grip handle
Customer assistance:
USA 1-855-664-1252
customersupport@bonavitaworld.com
Commercial UL rated: USA
Household UL rated: USA and Canada
Brushed stainless nish
1500 W
Cord storage wrap in base
Retains last settings when powered off or unplugged
READ THE MANUAL
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
Rev. 03/14
One year limited warranty
bonavitaworld.com
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be followed,
including the following:
• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against re, electric shock and injury to
persons, do not immerse cord, plugs, base or kettle
in water or other liquid.
• Never leave the appliance unattended when
in use. Close supervision is necessary when any
appliance is used by or near children.
• Unplug from outlet when not in use, moving kettle,
and before cleaning. Allow to cool before putting
on or taking off parts, and before cleaning the
appliance.
• Do not operate any appliance with a damaged
cord or plug, after the appliance malfunctions, or
has been damaged in any manner. Call our toll-free
customer assistance number for examination, repair
or adjustment.
• Do not use a base unit other than the one
supplied. The use of accessory attachments are
not recommended by the appliance manufacturer
and may result in re, electric shock, or injury to
persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter,
or touch hot surfaces. Always store excess portion
of the power cord in the compartment of the base
unit.
• Electric kettle must be operated on a at surface.
Do not place on or near a hot gas or electric burner,
or in a heated oven, or on the top of other electric
appliances.
• Always plug appliance in before turning on.
• To disconnect, turn control to off, then remove plug
from wall outlet.
• Do not use appliance for other than intended use.
• To avoid circuit overload, do not operate another
high wattage appliance on the same circuit.
• Do not ll kettle when positioned on base. Remove
all moisture from the kettle bottom before placing it
onto the power base.
• Be aware of steam being emitted from spout or lid
especially during relling.
• Do not use the kettle to heat anything other than
water.
• Do not ll above the max indication. If the kettle is
over lled, boiling water may be ejected.
• Do not insert any object into slots or holes of the
kettle.
• Scalding may occur if the lid is removed during the
heating cycle.
WARNING: This appliance utilizes a high wattage
relay for arriving at the desired water temperature.
In some instances, this relay may cause slight
ickering of lights on the same circuit. It is best to
use this appliance on a dedicated circuit or with all
other appliances off during this appliance’s use.
It will not damage electrical systems but caution
should be used to not overload this circuit with other
appliances running at the same time.
SAVE THESE
INSTRUCTIONS
Additional Safeguards
Do not operate appliance if power cord shows
any damage or if appliance works intermittently.
EXTENSION CORDS
A short power-supply cord is provided to reduce
the risk of becoming entangled in or tripping over a
longer cord. Longer detachable power-supply cords
or extension cords may be used if care is exercised
in their use. If a longer detachable power-supply
cord or extension cord is used, make sure:
1) The marked electrical rating of the cord set or
extension cord should be at least as great as the
electrical rating of the appliance, and
2) The extension cord should be a grounding-type
3-wire cord, and
3) The longer cord should be arranged so that it will
not drape over the countertop or tabletop where it
can be tripped over, snagged, or pulled on unintentionally (especially by children).
CAUTION: To ensure continued protection against
risk of electric shock, connect to properly ground
outlets only.
GROUNDING INSTRUCTIONS
The appliance has a plug that looks like Figure A.
An adaptor, as shown in Figure B, should be used
for connecting a 3-prong grounding plug to a 2-wire
receptacle. The grounding tab, which extends from
the adaptor, must be connected to a permanent
ground such as a properly grounded receptacle as
shown in Figure C, using a metal screw. This adaptor
would need to be purchased separately.
Circuit grounding
conductor
connected
properly
grounding prong
Adaptor
Metal mounting
screw
grounding means
Cover of grounded
outlet box
Parts
Gooseneck
spout
Lid
Lid release button
Handle
Water
level
indicator
Waterproof cover
Temperature set
point button
Power on
indicator light
On/Off switch
/ C
F
8
8
8
/o
n
o
ff
8
ld
o
h
Base with cord storage
button + button / Count up timer start
–
Power cord
with plug
Display degree
°F/°C button
Hold function
indicator light
Hold temperature button.
To maintain a set
temperature +/- 2°C
Using the kettle
D
Preparing the Kettle for First Time Use:
• Fill the kettle to max. ll line and bring to a boil.
• Let the kettle cool down for 1 minute.
• Empty kettle.
• Repeat boil and empty cycle twice before use.
1) Setting up the Kettle:
• Set the base on a at, even and steady surface.
• Remove the kettle from the base.
• Place the waterproof cover on top of base. (ill. A)
• Press the lid
release button to
open the lid.
• Fill the kettle
with cold water
(ill. B).
• Fill until you
have the desired
amount of water
with a max. of
1.7L.
• Monitor the
water level window
in handle while
adding water.
• After lling the
kettle with water,
press the lid into
kettle to close.
• Plug into the
power cord into
the standard wall
outlet. (ill. C)
• Put the kettle
rmly on the base
and press the
power button. The
power on indicator
will light and the
display ashes the
set temperature
on/off
for 3 seconds.
(ill. D)
2) Selecting the Display Temperature
Scale, Fahrenheit or Celsius:
• Press the °F/°C button to display the temperature
in Fahrenheit or Celsius when power is on.
3) Setting
the Shut Off
Temperature:
(ill. E)
Manual Setting
Temperature
set Point:
• Press the
temperature set
button, the last temperature setting ashes on the
B
display.
• Press the + or – button to select a different
temperature set point.
• Once the display stops ashing the temperature is
set and the display shows current water temperature.
Selecting the Preset Temperature
Set Points:
• Press the temperature set button.
• Continue to press temperature set button until your
desired preset set point is displayed.
• Note: The factory preset temperatures are: 60°C
(140°F), 80°C (176°F),85°C (185°F), 88°C (190°F),
96°C (205°F) and 98°C (208°F).
• The factory default temperature is 85°C (185°F).
Note: Once you have set the shut off temperature it
is stored in memory and will be recalled whenever
88 88
hold
-
+
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.