Bonavita BV382510V User Manual
1.0 L DIGITAL VARIABLE TEMPERATURE
Gooseneck
Kettle
Model: BV382510V
Customer Service Line:
USA 1-855-664-1252
1-year limited warranty
bonavitaworld.com
Patents: D683,584,
146260
• Displays kettle temperature in Fahrenheit or Celsius
• Displays real time water temperature
• Allows user to set and hold water temperature for up to one hour
• Preset temperatures for the most popular hot beverages
• Easy grip handle for comfortable handling
• Gooseneck spout for better pour control
• Commercial UL (USA Only)
• Brushed Stainless nish
• 1000 Watts
• Cord wraps in Base
READ THE MANUAL BEFORE USE AND SAVE FOR FUTURE REFERENCE
IMPORTANT SAFEGUARDS
WARNING: This appliance utilizes a high wattage relay for arriving at the
desired water temperature. In some instances, this relay may cause slight
ickering of lights on the same circuit. It is best to use this appliance on
a dedicated circuit or with all other appliances off during this appliance’s
use. It will not damage electrical systems but caution should be used to
not overload this circuit with other appliances running at the same time.
When using electrical appliances, basic safety precautions should always
be followed, including the following:
• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against re, electric shock and injury to persons, do not immerse
cord, plugs, base or kettle in water or other liquid.
• Never leave the appliance unattended when in use. Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, when empty, and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, after the appliance has malfunctioned, or has been damaged in any manner. Call our toll-free
Customer Assistance Number for examination, repair, or replacement.
• Do not use a base unit other than the one supplied. The use of accessory
attachments is not recommended by the appliance manufacturer and may result
in re, electrical shock or personal injury.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table, countertop, or touch hot
surfaces. Always store the excess portion of the power cord in the underside
compartment of the base unit.
• The digital kettle must be operated on a at surface. Do not place on or near
a hot electric or gas burner, or in a heated oven, or on the top of other electric
appliances.
• Plug cord into the wall outlet and then turn on. To disconnect, turn base off,
then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• To avoid circuit overload, do not operate another high wattage appliance on the
same circuit.
• Always remove kettle from base before lling. Remove all moisture on the bottom of the kettle before placing it onto the power base.
• Be aware of steam being emitted from spout or lid especially during relling.
Do not remove lid during heating cycle. Scalding may occur if the lid is removed
during heating cycles.
•
Do not use the kettle to heat anything other than water. Do not ll above the ‘max’
indicator inside the kettle. If the kettle is overlled, hot water may be ejected.
• Do not insert any object into slots or holes of the kettle.
SAVE THESE INSTRUCTIONS!
Warranty Information
1-year limited warranty from the date of original purchase.
1. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a
warranty claim.The product must be purchased at an authorized retailer for the
warranty to be valid.
2. Defects that occurred due to improper connection, improper handling, or
repair attempts by non-authorized persons are not covered by the warranty. The
same applies for failure to comply with the use of consumables (e.g. cleaning and
decalcifying agents) that do not correspond to the original specications.
3. Damages which are not the responsibility of the manufacturer are not covered
by the warranty. This is valid, especially for claims arising from improper use (e.g.
operation with wrong type of current or voltage).
4. The guarantee becomes void if repairs are carried out by third parties, who are
not authorized by the manufacturer to do so and/or if spare parts are used other
than the original ones.
5. Failure to comply with any safeguards listed in the Important Safeguards
section will void limited warranty.
6. Commercial UL Rated: USA
7. Household UL Rated: Canada
Please call 1-855-664-1252 for warranty claims.
ADDITIONAL SAFEGUARDS
DO NOT ATTEMPT TO OPERATE APPLIANCE IF THE POWER CORD
SHOWS ANY DAMAGE, OR IF APPLIANCE WORKS INTERMITTENTLY,
OR STOPS WORKING ENTIRELY.
EXTENSION CORDS
A short power-supply cord is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. Longer, detachable power-supply
cords or extension cords are available and may be used if care is exercised in
their use. If a longer detachable power-supply cord or extension cord is used:
• The marked electrical rating of the cord set or extension cord should be at least
as great as the electrical rating of the appliance
• The extension cord should be a grounding-type 3-wire cord
• The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on unintentionally
(especially by children).
CAUTION: This appliance must be grounded when in use. To ensure protection against risk of electric shock, connect to properly ground outlets only.
GROUNDING INSTRUCTIONS
The appliance has a plug that looks like Figure A. An adaptor, as shown in Figure
B, should be used for connecting a 3-prong grounding plug to a 2-wire receptacle. The grounding tab, which extends from the adaptor, must be connected to a
permanent ground such as a properly grounded receptacle as shown in Figure C,
using a metal screw.
Circuit grounding
conductor
connected
properly
grounding prong
Adaptor
grounding means
Metal mounting
screw
Cover of grounded
outlet box
Spout
Lid
Water level indicator (inside
of kettle on handle side)
Handle
Rated voltage: 120 V 60 Hz
Rated current: 8.3 A
Rated power input: 1000 W
Capacity: max. 33.8 oz (1.0 L)
Temperature
set point
button
Power on
indicator light
On/Off switch
Waterproof cover
/ C
F
8
8
8
/o
n
o
ff
8
ld
o
h
Base with cord storage
button + button / Count up timer start
–
Base
Power cord
with plug
Display degree
°F/°C button
Hold function
indicator light
Hold temperature button.
To maintain a set
temperature +/- 2°C
Operating Your Kettle
Before plugging the kettle into the wall outlet, check that the electrical circuit is
not overloaded with other appliances.
SETTING UP THE KETTLE:
1. Set the base on a at, even and steady surface.
2. Remove the kettle from the base. Place the waterproof cover on top of base.(ill. A)
3. Take off the lid. Fill the kettle with cold water
(ill. B). Do not ll over the ‘max’ indicator marking.
4. After lling the kettle with water, insert the lid into
kettle with holes facing towards handle. Plug the
power cord into the standard wall outlet. (ill. C)
5. Put the kettle rmly on the base and press the
on/off button. The power on indicator light will turn
on. The display ashes the set temperature for 3
seconds. (ill. D)
The factory default temperature is 185°F (85°C)
PREPARING THE KETTLE FOR FIRST TIME
USE:
1. Fill the kettle to Max ll line with cold water and
then heat at the maximum temperature setting, then
empty.
2. Let the appliance cool down 1 minute
3. Repeat heating cycle and rinse. Your kettle is now
ready for use.
SELECTING THE DISPLAY
TEMPERATURE UNITS, °F or °C:
Press the °F/°C button to display the temperature in
Fahrenheit or Celsius when the power is on.
SELECTING THE PRESET TEMPERATURES (ILL. E):
Press the temperature set button and continue to
press it until your desired preset temperature is displayed.
Note: The Factory preset temperatures are: 60°C
(140°F), 80°C (176°F), 85°C (185°F), 88°C (190°F),
96°C (205°F) and 98°C (208°F).
MANUALLY SETTING TEMPERATURE SET POINT
1. Press the temperature set button. The last temperature set point ashes on
the display.
2. Press the + or – button to select your preferred temperature.
3. Once the display stops ashing the temperature is set and the display shows
current water temperature.
Once you have set the temperature set point, it is stored in memory and will be
recalled whenever you turn on the kettle. There is no need to set the temperature every time unless you want to change the set point.
During the heating cycle the LED display shows the current water temperature.
After the set temperature is reached the heater will turn off but the display will
continue to show water temperature for up to 1 hour if the kettle isn’t removed
from the base.
If the kettle is removed from base during a heating cycle the heating cycle and
power on indicator light turn off. The LED will display “0 00”. When the kettle is
returned to base the display will show current water temperature for 7 minutes
and then turn off.
To manually interrupt the heating process, press the on/off button at any time.
The heater and LED lights will turn off.
SELECTING WATER TEMPERATURE HOLD
This feature allows the kettle to reach and maintain water at a set temperature
for up to one hour. This is an optional setting.
1. First select the temperature set point using above steps.
2. Press the hold button and the hold indicator LED will turn on. (ill. E).
3. When set temperature is reached the heater will turn off and on as needed to
maintain set temperature. The power on indicator light is on and the LED display
shows the current water temperature.
4. When you lift kettle to pour and return to the base, the hold button must be
pressed again if you want to continue the hold temperature function. If you don’t
press the hold button after returning the kettle to base, the display will show
current water temperature for 7 minutes and then the unit will power off.
HIGH ALTITUDE USE
At higher elevations water boils at lower temperatures. Use the graph
below to set your kettle temperature.
COUNT UP TIMER FEATURE
Note: when you lift the kettle, the LED display will show the count-up timer.
The rst number indicates the minutes, and the last two numbers indicate the
seconds (the maximum count time is 7 minutes). Press the + button to start the
timer. Set the kettle back on the base and lift back off to reset timer to zero.
Loading...