BOMBARDIER 1999 Traxter Operator's Manual

WARNING

Read this guide thoroughly.
It contains important safety information.

Minimum recommended operator age:
16 years old.

704 000 000

Particularly important information in this Safety Handbook is designated by the
following:

The Safety Alert Symbol means ATTENTION!

WARNING

Identifies an instruction which if not followed, may
cause injuries including the possibility of death.

CAUTION: Denotes an instruction which if not followed, may damage the
ATV and/or components.

WARNING

YOUR ATV CAN BE HAZARDOUS TO OPERATE. A collision or rollover can

occur quickly, even during routine maneuvers such as turning and driving
on hills or over obstacles, if you fail to take proper precautions.

For your safety, understand and follow all the warnings contained in the

Operator’s Guide

Failure to follow these warnings can result in SEVERE INJURY OR DEATH.

Keep this

Operator’s Guide

times.

AFTER SALES SERVICE
BOMBARDIER
RECREATIONAL PRODUCTS
VALCOURT, QUEBEC
CANADA J0E 2L0

, the

Safety Handbook

and the

and the labels on your vehicle.

Safety Handbook

with the vehicle at all

Litho’d in Canada
®*Trademarks of Bombardier Inc.
All rights reserved © Bombardier Inc. 1999 (VMO-9903 SH January 1999) final version

FOREWORD

Congratulations on your purchase of a
new Bombardier all-terrain vehicle
(ATV). It is backed by the Bombardier
warranty and a network of authorized
Bombardier ATV dealers ready to pro­vide the parts, service or accessories
you may require.

Your dealer is committed to your satis­faction. He has taken training to per­form the initial set-up and inspection
of your vehicle as well as completed
the final adjustment before you took
possession. At delivery, your dealer
would have explained the vehicle for
the operation, maintenance and safety
features. We trust you have taken full
advantage of this! If you need more
complete servicing information,
please ask your dealer about the prop­er model-year ATV

At delivery, you were also informed of
the warranty coverage and completed
the Warranty Registration Form which
is to be sent to us for processing. In
the near future you should be receiv­ing a warranty card which will confirm
our receipt of the registration as well
as be used for warranty or recall pur­poses.

You are invited to contact our custom­er assistance center should you expe­rience problems which cannot be re­solved by an authorized Bombardier
ATV dealer.

It is understood that this guide may be
translated into another language. In
the event of any discrepancy, the En­glish version shall prevail.

Shop Manual

.

The information and components/
system descriptions contained in this
document are correct at the time of
publication. Bombardier Inc. however,
maintains a policy of continuous im­provement of its products without im­posing upon itself any obligation to in­stall them on products previously
manufactured. Due to late changes, it
may have some differences between
the manufactured product and the de­scriptions and/or specifications in this
guide. Bombardier Inc. reserves the
right at any time to discontinue or
change specifications, designs, fea­tures, models or equipment without
incurring any obligation upon itself.

The illustrations in this document
show the typical construction of the
different assemblies and may not re­produce the full detail or exact shape
of the parts. However, they represent
parts that have the same or similar
function.

Specifications are given in the SI metric
system with the SAE U.S. equivalent in
parenthesis. Where precise accuracy is
not required, some conversions are
rounded off for easier use.

A

Shop Manual

complete service, maintenance and
more repair information.

can be obtained for

1

TABLE OF CONTENTS

WARNING

Indicates a potential hazard that could result in serious injury or death.

NOTICE....................................................................................... 4

SPECIAL SAFETY MESSAGES.................................................... 5

OPERATION WARNINGS ............................................................ 7

BOMBARDIER LIMITED WARRANTY1999

BOMBARDIER ATV ALL-TERRAIN VEHICLE ................................ 20

FREQUENTLY ASKED QUESTIONS ............................................. 22

LOCATION OF THE IMPORTANT LABELS ................................... 24

HOW TO IDENTIFY YOUR ATV ................................................... 27

Engine and Vehicle Identification Number Location................................ 27

CONTROLS/INSTRUMENTS/EQUIPMENTS.................................. 28

1) Throttle Lever.................................................................................... 30

2) Front Brake Lever ............................................................................. 30

3) Rear Brake Lever .............................................................................. 30

4) Brake Lever Lock .............................................................................. 31

5) Transmission Lever........................................................................... 31

6) Electric Gear Shift Button ................................................................. 32

7) Start/Stop Button .............................................................................. 32

8) Headlight Dimmer Switch................................................................. 32

9) Indicator Lights Cluster ..................................................................... 33

10) Speedometer .................................................................................... 34

11) Ignition Switch .................................................................................. 35

12) Choke Knob Lever............................................................................. 35

13) Fuel Tank Cap ................................................................................... 36

14) Fuel Gauge........................................................................................ 36

15) Fuel Valve.......................................................................................... 36

16) Rear Brake Pedal............................................................................... 37

17) Rewind Starter Handle...................................................................... 37

18) Footpeg............................................................................................. 38

19) Storage Compartment ...................................................................... 38

20) Seat Latch ......................................................................................... 38

21) Front/Rear Cargo Racks .................................................................... 39

22) Air Duct ............................................................................................. 39

23) Trailer Hitch....................................................................................... 39

24) Radiator Cap...................................................................................... 39

25) 12-Volt Power Outlet ........................................................................ 40

26) Fuses ................................................................................................ 40

2

LIQUIDS...................................................................................... 41

Fuel.......................................................................................................... 41

Engine/Transmission Oil.......................................................................... 41

Engine Coolant ........................................................................................ 43

Brake Fluid............................................................................................... 44

Battery Electrolyte................................................................................... 44

BREAK-IN PERIOD ...................................................................... 46

Engine ..................................................................................................... 46

10-Hour Inspection.................................................................................. 46

PRE-OPERATION CHECK ............................................................ 47

OPERATING INSTRUCTIONS ...................................................... 48

General.................................................................................................... 48

Initial Cold Starting .................................................................................. 48

Warm Engine Starting ............................................................................. 48

Emergency Manual Starting.................................................................... 49

Stopping the Engine................................................................................ 49

Shifting the Transmission........................................................................ 49

SPECIAL PROCEDURES.............................................................. 50

Park Release............................................................................................ 50

Flooded Engine........................................................................................ 50

Engine Overheat...................................................................................... 51

Post-Operation Care................................................................................ 51

Emergency Shifter................................................................................... 51

Storage and Preseason Preparation........................................................ 52

MAINTENANCE CHART .............................................................. 53

MAINTENANCE .......................................................................... 55

Lubrication............................................................................................... 55

Maintenance............................................................................................ 56

Fuel System ............................................................................................ 57

Electrical.................................................................................................. 59

Drive Train ............................................................................................... 61

Wheel Bearing Condition......................................................................... 63

Brake ....................................................................................................... 63

Suspension.............................................................................................. 63

Body/Frame............................................................................................. 63

CARGO AND TRANSPORTATION................................................ 64

Cargo....................................................................................................... 64

Transportation ......................................................................................... 64

TROUBLESHOOTING................................................................... 66

SPECIFICATIONS........................................................................ 68

SI METRIC INFORMATION GUIDE............................................... 71

CHANGE OF ADDRESS............................................................... 73

3

NOTICE

The

Operator’s Guide

Handbook

quaint the owner/operator of a new
vehicle with the various vehicle con­trols, maintenance and safe operating
instructions. They are indispensable
for the proper use of the product.

This guide uses the following sym­bols.

have been prepared to ac-

WARNING

Identifies an instruction which, if
not followed, could cause serious
personal injuries including the
possibility of death.

CAUTION: Denotes an instruction
which, if not followed, could severe­ly damage vehicle components.

NOTE: Indicates supplementary infor-

mation needed to fully complete an in­struction.

Although the mere reading of such in­formation does not eliminate the haz­ard, the understanding and application
of the information will promote its cor­rect use.

To fully appreciate the pleasures, en­joyment and excitement of using an
all-terrain vehicle (ATV), there are
some basic rules that MUST be ob­served and followed by any four­wheeler.

and

Safety

4

SPECIAL SAFETY MESSAGES

AN ATV IS NOT A TOY AND CAN BE
HAZARDOUS TO OPERATE.

An ATV handles differently from other
vehicles including motorcycles and
cars. A collision or rollover can occur
quickly, even during routine maneu­vers such as turning and driving on
hills or over obstacles, if you fail to
take proper precautions.

SEVERE INJURY OR DEATH can re­sult if you do not follow these instruc­tions:

• Read the

Safety Handbook

fully and follow the operating proce­dures described.

• Never operate an ATV without proper
instruction. Take a training course.
Beginners should receive training
from a certified instructor. Contact an
authorized ATV dealer to find out
about the training courses nearest
you or call the Specialty Vehicle Insti­tute of America (SVIA) at 1-800-887­2887 or in Canada, the Canada Safety
Council (CSC) at 1-613-739-1535 ext

227.

• Always follow this age recommen­dation: A child under 16 years old
should never operate this ATV.

• Never carry a passenger on an ATV.

• Never operate an ATV on any paved
surfaces, including sidewalks,
driveways, parking lots and streets.

• Never operate an ATV on any public
street, road or highway, even a dirt
or gravel one.

• Never operate an ATV without
wearing an approved helmet that
fits properly. You should also wear
eye protection (goggles or face
shield), gloves, boots, long sleeved
shirt or jacket, and long pants.

Operator’s Guide

and all labels care-

, the

• Never consume alcohol or drugs
before or while operating this ATV.

• Never operate at excessive speeds.
Always go at a speed that is proper
for the terrain, visibility, and operat­ing conditions, and your experi­ence.

• Never attempt wheelies, jumps, or
other stunts.

• Always inspect your ATV each time
you use it to make sure it is in safe
operating condition. Always follow
the inspection and maintenance
procedures and schedules de­scribed in the
the

Safety Handbook

• Always keep both hands on the
handlebars and both feet on the
footpegs of the ATV during opera­tion.

• Always go slowly and be extra care­ful when operating on unfamiliar
terrain. Always be alert to changing
terrain conditions when operating
the ATV.

• Never operate on excessively
rough, slippery or loose terrain until
you have learned and practiced the
skills necessary to control the ATV
on such terrain. Always be especial­ly cautious on these kinds of terrain.

• Always follow proper procedures
for turning as described in the

ator’s Guide
book

. Practice turning at low speeds
before attempting to turn at faster
speeds. Do not turn at excessive
speed.

• Never operate the ATV on hills too
steep for the ATV or for your abili­ties. Practice on smaller hills before
attempting larger hills.

Operator’s Guide

.

and the

Safety Hand-

and

Oper-

5

• Always follow proper procedures
for climbing hills as described in the

Operator’s Guide
Handbook

fully before you start up any hill.
Never climb hills with excessively
slippery or loose surfaces. Shift
your weight forward. Never open
the throttle suddenly or make sud­den gear changes. Never go over
the top of any hill at high speed.

• Always follow proper procedures
for going down hills and for braking
on hills as described in the

. Check the terrain care-

tor’s Guide
book

. Check the terrain carefully be­fore you start down any hill. Shift
your weight backward. Never go
down a hill at high speed. Avoid go­ing down a hill at an angle that
would cause the vehicle to lean
sharply to one side. Go straight
down the hill where possible.

• Always follow proper procedures
for crossing the side of a hill as de­scribed in the
the

Safety Handbook

with excessively slippery or loose
surfaces. Shift your weight to the
uphill side of the ATV. Never at­tempt to turn the ATV around on
any hill until you have mastered the
turning technique described in the

Operator’s Guide
Handbook

crossing the side of a steep hill if
possible.

• Always use proper procedures if
you stall or roll backwards when
climbing a hill. To avoid stalling, use
proper gear and maintain a steady
speed when climbing a hill. If you
stall or roll backwards, follow the
special procedure for braking de­scribed in the
the
the uphill side or to a side if pointed
straight uphill. Turn the ATV around
and remount, following the proce­dure described in the

Guide

on level ground. Avoid

Safety Handbook

and the

and the

and the

Safety Hand-

Operator’s Guide

. Avoid hills

and the

Operator’s Guide

. Dismount on

Operator’s

Safety Handbook

Safety

Opera-

and

Safety

and

.

• Always check for obstacles before
operating in a new area. Never at­tempt to operate over large obsta­cles, such as large rocks or fallen
trees. Always follow proper proce­dures when operating over obsta­cles as described in the

Guide

and the

• Always be careful when skidding or
sliding. Learn to safely control skid­ding or sliding by practicing at low
speeds and on level, smooth ter­rain. On extremely slippery surfac­es, such as ice, go slowly and be
very cautious in order to reduce the
chance of skidding out of control.

• Never operate an ATV in fast flow­ing water or in water deeper than
that specified in the

Guide

Remember that wet brakes may
have reduced stopping ability. Test
your brakes after leaving water. If
necessary, apply them several
times to let friction dry out the pads.

• Always be sure there are no obsta­cles or people behind you when you
operate in reverse. When it is safe
to proceed in reverse, go slowly.

• Always use the size and type tires
specified in the
Always maintain proper tire pres­sure as described in this guide.

• Never modify an ATV through im­proper installation or use of acces­sories.

• Never exceed the stated load limits
for an ATV. Cargo should be properly
distributed and securely attached.
Reduce speed and follow instruc­tions in the
the
cargo or pulling a trailer. Allow great­er distance for braking.

• FOR MORE INFORMATION ABOUT
ATV SAFETY, call the Specialty Ve­hicle Institute of America (SVIA) at
1-800-887-2887 or in Canada, the
Canada Safety Council (CSC) at 1­613-739-1535 ext. 227.

and the

Safety Handbook

Safety Handbook

Safety Handbook

Operator’s Guide

Operator’s Guide

Operator’s

.

Operator’s

and

for carrying

.

.

6

OPERATION WARNINGS

WARNING

Indicates a potential hazard that could result in serious injury or death.

The following warnings and their format have been requested by the United
States Consumer Product Safety Committee and are required to be in the

ator's Guide

and

Safety Handbook

for all ATV's.

WARNING

POTENTIAL HAZARD

Operating this ATV without proper instruction.

WHAT CAN HAPPEN

The risk of an accident is greatly increased if the operator does not know
how to operate the ATV properly in different situations and on different
types of terrain.

HOW TO AVOID THE HAZARD

Beginning and inexperienced operators should complete the certified
training course offered by Bombardier Inc. They should then regularly
practice the skills learned in the course and the operating techniques de­scribed in the

For more information about the training course, contact an authorized ATV
dealer or call Bombardier Inc. at 1-800-532-5000.

Operator’s Guide

and the

Safety Handbook

.

Oper-

WARNING

POTENTIAL HAZARD

Failure to follow the age recommendations for this ATV.

WHAT CAN HAPPEN

Use by children of ATVs that are not recommended for their age can lead
to severe injury or death of the child.

Even though a child may be within the age group for which an ATV is
recommended, he or she may not have the skills, abilities, or judgment
needed to operate the ATV safely and may be involved in a serious acci­dent.

HOW TO AVOID THE HAZARD

No one under 16 should operate a Bombardier ATV.

7

WARNING

POTENTIAL HAZARD

Carrying a passenger on this ATV.

WHAT CAN HAPPEN

Greatly reduces your ability to balance and control this ATV.
Could cause an accident, resulting in harm to you and/or your passenger.

HOW TO AVOID THE HAZARD

Never carry a passenger. The long seat is to allow the operator to shift
position as needed during operation. It is not for carrying passengers.

WARNING

POTENTIAL HAZARD

Operating this ATV on paved surfaces.

WHAT CAN HAPPEN

The ATV's tires are designed for off-road use only, not for use on pave­ment. Paved surfaces may seriously affect handling and control of the
ATV, and may cause the vehicle to go out of control.

HOW TO AVOID THE HAZARD

Never operate the ATV on any paved surfaces, including sidewalks, drive­ways, parking lots and streets.

WARNING

POTENTIAL HAZARD

Operating this ATV on public streets, roads or highways.

WHAT CAN HAPPEN

You can collide with another vehicle.

HOW TO AVOID THE HAZARD

Never operate this ATV on any public street, road or highway, even a dirt
or gravel one. In many states it is illegal to operate ATVs on public streets,
roads and highways.

8

WARNING

POTENTIAL HAZARD

Operating this ATV without wearing an approved motorcycle helmet, eye
protection and protective clothing.

WHAT CAN HAPPEN

Operating without an approved motorcycle helmet increases your chanc­es of a severe head injury or death in the event of an accident.

Operating without eye protection can result in an accident and increases
your chances of a severe injury in the event of an accident.

Operating without protective clothing increases your chances of severe
injury in the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved motorcycle helmet that fits properly. You should
also wear:

– eye protection (goggles or face shield)
–gloves
– boots
– Iong sleeved shirt or jacket
– Iong pants.

WARNING

POTENTIAL HAZARD

Operating this ATV after consuming alcohol or drugs.

WHAT CAN HAPPEN

Could seriously affect your judgment.
Could cause you to react more slowly.
Could affect your balance and perception.
Could result in an accident.

HOW TO AVOID THE HAZARD

Never consume alcohol or drugs before or while driving this ATV.

9

WARNING

POTENTIAL HAZARD

Operating this ATV at excessive speeds.

WHAT CAN HAPPEN

Increases your chances of losing control of the ATV, which can result in an
accident.

HOW TO AVOID THE HAZARD

Always travel at a speed which is proper for the terrain, visibility and op­erating conditions, and your experience.

WARNING

POTENTIAL HAZARD

Attempting wheelies, jumps and other stunts.

WHAT CAN HAPPEN

Increases the chance of an accident, including an overturn.

HOW TO AVOID THE HAZARD

Never attempt stunts, such as wheelies or jumps. Don't try to show off.

WARNING

POTENTIAL HAZARD

Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you use it to make sure the ATV is in
safe operating condition.

Always follow the inspection and maintenance procedures and schedules
described in the

10

Operator’s Guide

and the

Safety Handbook

.

WARNING

POTENTIAL HAZARD

Removing hands from handlebars or feet from footpegs during operation.

WHAT CAN HAPPEN

Removing even one hand or foot can reduce your ability to control the ATV
or could cause you to lose your balance and fall off the ATV. If you remove
a foot from the footpegs, your foot or leg may come into contact with the
rear wheels, which could injure you or cause an accident.

HOW TO AVOID THE HAZARD

Always keep both hands on the handlebars and both feet on the footpetgs
of your ATV during operation.

WARNING

POTENTIAL HAZARD

Failure to use extra care when operating this ATV on unfamiliar terrain.

WHAT CAN HAPPEN

You can come upon hidden rocks, bumps, or holes, without enough time
to react.

Could result in the ATV overturning or going out of control.

HOW TO AVOID THE HAZARD

Go slowly and be extra careful when operating on unfamiliar terrain.
Always be alert to changing terrain conditions when operating the ATV.

WARNING

POTENTIAL HAZARD

Failure to use extra care when operating on excessively rough, slippery or
loose terrain.

WHAT CAN HAPPEN

Could cause loss of traction or vehicle control, which could result in an
accident, including an overturn.

HOW TO AVOID THE HAZARD

Do not operate on excessively rough, slippery or loose terrain until you
have learned and practiced the skills necessary to control the ATV on such
terrain.

Always be especially cautious on these kinds of terrain.

11

WARNING

POTENTIAL HAZARD

Turning improperly.

WHAT CAN HAPPEN

ATV could go out of control, causing a collision or overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for turning as described in the

tor’s Guide

fore attempting to turn at faster speeds.
Do not turn at excessive speed.

and the

Safety Handbook

. Practice turning at low speeds be-

Opera-

12

V01L2BQ

WARNING

POTENTIAL HAZARD

Operating on excessively steep hills.

WHAT CAN HAPPEN

The vehicle can overturn more easily on extremely steep hills than on level
surfaces or small hills.

HOW TO AVOID THE HAZARD

Never operate the ATV on hills too steep for the ATV or for your abilities.
Practice on smaller hills before attempting larger hills.

13

WARNING

POTENTIAL HAZARD

Climbing hills improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause ATV to overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for climbing hills as described in the

erator's Guide

Always check the terrain carefully before you start up any hill.
Never climb hills with excessively slippery or loose surfaces.
Shift your weight forward.
Never open the throttle suddenly or make sudden gear changes. The ATV

could flip over backwards.
Never go over the top of any hill at high speed. An obstacle, a sharp drop,

or another vehicle or person could be on the other side of the hill.

and the

Safety Handbook

.

Op-

WARNING

POTENTIAL HAZARD

Going down a hill improperly.

WHAT CAN HAPPEN

Could cause loss of control or cause ATV to overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for going down hills as described in the

Operator's Guide

NOTE: A special technique is required when braking as you go down a hill.
Always check the terrain carefully before you start down any hill.
Shift your weight backward.
Never go down a hill at high speed.
Avoid going down a hill at an angle which would cause the vehicle to lean

sharply to one side. Go straight down the hill where possible.

14

and the

Safety Handbook

.

V01L2CQ

WARNING

POTENTIAL HAZARD

Improperly crossing hills or turning on hills.

WHAT CAN HAPPEN

Could cause loss of control or cause ATV to overturn.

HOW TO AVOID THE HAZARD

Never attempt to turn the ATV around on any hill until you have mastered
the turning technique as described in the

Handbook

Avoid crossing the side of a steep hill if possible.

When crossing the side of a hill:

Always follow proper procedures as described in the
and the

Avoid hills with excessively slippery or loose surfaces.
Shift your weight to the uphill side of the ATV.

on level ground. Be very careful when turning on any hill.

Safety Handbook

.

Operator's Guide

Operator's Guide

and the

Safety

15

WARNING

POTENTIAL HAZARD

Stalling, rolling backwards or improperly dismounting while climbing a hill.

WHAT CAN HAPPEN

Could result in ATV overturning.

HOW TO AVOID THE HAZARD

Use proper gear and maintain steady speed when climbing a hill.

If you lose all forward speed:

Keep weight uphill.
Apply the brakes.
Lock parking device and set transmission to park after you are stopped.

If you begin rolling backwards:

Keep weight uphill.
Never apply the rear brake while rolling backwards.
Apply the front brake gradually.
When fully stopped, apply rear brake as well, lock parking device and set

transmission to park.
Dismount on uphill side, or to a side if pointed straight uphill.
Turn the ATV around and remount, following the procedure described in

the

Operator's Guide

and the

Safety Handbook

.

WARNING

POTENTIAL HAZARD

Improperly operating over obstacles.

WHAT CAN HAPPEN

Could cause loss of control or a collision. Could cause the ATV to overturn.

HOW TO AVOID THE HAZARD

Before operating in a new area, check for obstacles.
Never attempt to ride over large obstacles, such as large rocks or fallen trees.
When you go over obstacles, always follow proper procedures as de-

scribed in the

16

Operator's Guide

and the

Safety Handbook

.

WARNING

POTENTIAL HAZARD

Skidding or sliding improperly.

WHAT CAN HAPPEN

You may lose control of this ATV.
You may also regain traction unexpectedly, which may cause the ATV to

overturn.

HOW TO AVOID THE HAZARD

Learn to safely control skidding or sliding by practicing at low speeds and
on level, smooth terrain.

On extremely slippery surfaces, such as ice, go slowly and be very cau­tious in order to reduce the chance of skidding or sliding out of control.

WARNING

POTENTIAL HAZARD

Operating this ATV through deep or fast flowing water.

WHAT CAN HAPPEN

Tires may float, causing loss of traction and loss of control, which could
lead to an accident.

HOW TO AVOID THE HAZARD

Never operate this ATV in fast flowing water or in water deeper than that
specified in the

Remember that wet brakes may have reduced stopping ability. Test your
brakes after leaving water. If necessary, apply them several times to let
friction dry out the pads.

Operator's Guide

and the

Safety Handbook

.

WARNING

POTENTIAL HAZARD

Improperly operating in reverse.

WHAT CAN HAPPEN

You could hit an obstacle or person behind you, resulting in serious injury.

HOW TO AVOID THE HAZARD

When you select reverse gear, make sure there are no obstacles or people
behind you. When it is safe to proceed, go slowly.

17

WARNING

POTENTIAL HAZARD

Operating this ATV with improper tires, or with improper or uneven tire
pressure.

WHAT CAN HAPPEN

Use of improper tires on this ATV, or operation of this ATV with improper
or uneven tire pressure, may cause loss of control, and increases the risk
of an accident.

HOW TO AVOID THE HAZARD

Always use the size and type, tires specified in the
this vehicle.

Always maintain proper tire pressure as described in the
and the

Safety Handbook

.

Operator’s Guide

Operator’s Guide

for

WARNING

POTENTIAL HAZARD

Operating this ATV with improper modifications.

WHAT CAN HAPPEN

Improper installation of accessories or modification of this vehicle may cause
changes in handling which in some situations could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this ATV through improper installation or use of accesso­ries. All parts and accessories added to this vehicle should be genuine
Bombardier or equivalent components designed for use on this ATV and
should be installed and used according to instructions. If you have ques­tions, consult an authorized Bombardier ATV dealer.

18

WARNING

POTENTIAL HAZARD

Overloading this ATV or carrying or towing cargo improperly.

WHAT CAN HAPPEN

Could cause changes in vehicle handling which could lead to an accident.

HOW TO AVOID THE HAZARD

Never exceed the stated load capacity for this ATV.
Cargo should be properly distributed and securely attached.
Reduce speed when carrying cargo or pulling a trailer. Allow greater dis-

tance for braking.
Always follow the instructions in the

Handbook

for carrying cargo or pulling a trailer.

Operator’s Guide

and the

Safety

WARNING

Indicates a potential hazard that could result in serious injury or death.

19

BOMBARDIER LIMITED WARRANTY1999 BOMBARDIER ATV ALL-TERRAIN VEHICLE

1. WARRANTY COVERAGE PERIOD

In Canada, BOMBARDIER INC. and in the USA, BOMBARDIER MOTOR CORPO­RATION OF AMERICA, warrants FROM THE DATE OF DELIVERY TO THE FIRST
CONSUMER that each 1999 TRAXTER all-terrain vehicle sold, as NEW and UN­USED and PREDELIVERED by an authorized North American BOMBARDIER ATV
dealer, will be free from any defects in material and/or workmanship for a period
of:

SIX (6) CONSECUTIVE MONTHS, for private use owners, or
THREE (3) CONSECUTIVE MONTHS, for commercial use owners.
Tires supplied as original equipment on your ATV are warranted separately by the

individual tire manufacturer as identified below. If an original tire on your Bombar­dier ATV has a defect in material or workmanship, please contact your tire man­ufacturer or ask your authorized Bombardier ATV dealer for assistance.

Carlisle Tire & Wheel Company
23 Windham Boulevard
Aiken, SC 29805
Warranty Information: 1-800-260-7959

All genuine Bombardier accessories, installed by an authorized BOMBARDIER
ATV dealer at the time of delivery of the new and unused BOMBARDIER ATV,
carry the same Warranty Coverage Period as for the BOMBARDIER ATV.

2. WHAT BOMBARDIER WILL DO

BOMBARDIER will repair or replace, at its option, all genuine BOMBARDIER part
found defective in material and/or workmanship, under normal use, maintenance
and service, with a genuine BOMBARDIER part without charge for parts and
labor, at any authorized BOMBARDIER ATV dealer during the Warranty Coverage
Period.

3. CONDITION TO HAVE WARRANTY WORK VALIDATED

The customer must notify an authorized BOMBARDIER ATV dealer within two (2)
days of the appearance of a defect in material and/or workmanship and present
to the servicing authorized BOMBARDIER ATV dealer the BOMBARDIER ATV
Warranty Registration Card or a proof of purchase of the NEW and UNUSED
1999 BOMBARDIER ATV and must sign the repair/work order prior to the start of
the repair in order to validate a warranty repair. All parts replaced under this lim­ited warranty become the property of BOMBARDIER.

4. EXCLUSIONS — ARE NOT WARRANTED

• Normal wear and tear items;

• Labor, parts and lubricant costs of all maintenance services;

• Damage caused by failure to provide proper maintenance and/or storage, as
described in the “1999 BOMBARDIER ATV

• Damage resulting from improper repairs, modifications or use of non-approved
parts or, repairs done by a non-authorized BOMBARDIER ATV dealer;

Operator's Guide

”;

20

• Damage resulting from abuse, misuse, neglect or racing.

• Damage resulting from accident, fire, theft, vandalism or any act of God;

• Incidental or consequential damages, or damages of any kind as but not
limited to towing charges, telephone calls or taxi; and

• Damages resulting from improper service or maintenance.

5. LIMITATIONS OF LIABILITY

This warranty gives you specific rights, and you may also have other legal rights
which may vary from state to state, or province to province. WHERE APPLICA-

BLE, THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF
ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUD­ING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE.

Neither the distributor, any authorized BOMBARDIER ATV dealer nor any other per­son has been authorized to make any affirmation, representation or warranty other
than those contained in this warranty, and if made, such affirmation, representation
or warranty shall not be enforceable against BOMBARDIER or any other person.

In no event shall BOMBARDIER be liable for special, consequential or incidental
damages, including but not limited to loss of use and transportation costs. Some
states or provinces do not allow the exclusion or limitation of incidental or conse­quential damages, or limitations on how long an implied warranty lasts, so the
above limitation or exclusion may not apply.

BOMBARDIER reserves the right to modify this warranty at any time, being un­derstood that such modification will not alter the warranty conditions applicable
to the BOMBARDIER ATV sold while this warranty is in effect.

6. CONSUMER ASSISTANCE

a) In the event of a controversy or a dispute arising in connection with this BOM-

BARDIER LIMITED WARRANTY, BOMBARDIER suggests that you try to re­solve the issue at the dealership level. We recommend discussing the issue
with the authorized dealer's service manager or owner.

b) If further assistance is required, the DISTRIBUTOR's Service Department

should be contacted in order to resolve the matter.

c) If the issue has still not been resolved, please submit in writing your complaint to:

IN CANADA: IN U.S.A.:

BOMBARDIER

RECREATIONAL PRODUCTS
SNOWMOBILES AND ATV
CUSTOMER ASSISTANCE CENTER
VALCOURT QC J0E 2L0

Tel: [phone]

BOMBARDIER

RECREATIONAL PRODUCTS
SNOWMOBILES AND ATV
OCTOBER 1998
® Registered trademark of Bombardier Inc. and/or affiliates.

BOMBARDIER MOTOR
CORPORATION OF AMERICA

RECREATIONAL PRODUCTS
SNOWMOBILES AND ATV
CUSTOMER ASSISTANCE CENTER
P.O. BOX 8035
7575 BOMBARDIER COURT
WAUSAU WI 54402-8035

Tel: [phone]

21

FREQUENTLY ASKED QUESTIONS

Q: Why must my vehicle be registered with the factory? After all, I do have my

original invoice as proof of when I purchased my vehicle.

A: Registration is very important and an authorized Bombardier ATV dealer

must register your vehicle with Bombardier Inc. Make sure the card has
been sent. All of this will allow you to:

a) Have warranty work performed at any authorized Bombardier ATV deal-

er in North America. Your registration card will provide the dealer with
all the necessary data to complete warranty claim forms.

b) Be advised by Bombardier Inc. should there be a safety recall or a par-

ticular warranty campaign.

c) Be contacted much faster by the police, in the event that they find your

vehicle subsequent to a theft.

Q: Why must my vehicle be registered with the governing body having jurisdic-

tion over vehicle use?

A: Vehicle registration has two purposes: In many provinces or States, it is

mandatory to register a vehicle in the same way as for a car. It allows the
State or province to maintain records of existing vehicles. In some juridic­tions, governmental agencies use part of the registration fees for estab­lishing and maintaining trails.

Q: Where can I find information on the lubrication and maintenance of my vehicle?

A: In the

Q: Will the entire warranty be voided or cancelled, if I do not operate or maintain

my new vehicle exactly as specified in the

A: The warranty of the new vehicle cannot be “Voided” or “Cancelled” if

Q: Would you give some examples of abnormal use or strain, neglect or abuse

which may affect the limited warranty coverage?

A: These terms are general and overlap each other in some cases. Some

Q: What costs are my responsibility during the warranty period?

A: The customer’s responsibility includes all costs of normal maintenance

Operator’s Guide

predelivered by an authorized Bombardier ATV dealer. However, if a partic­ular failure is caused by operation or maintenance other than is shown in
the

Operator’s Guide

This includes service work performed by the customer, oil and filter
change and especially the critical adjustments such as the carburetor.

specific examples may include: running the engine out of oil, operating the
vehicle with a broken or damaged part which causes another part to fail,
and so on. If you have any specific questions on operation or maintenance,
please contact an authorized Bombardier ATV dealer for advice.

services, non-warranty repairs, accidents and collision damage, as well as
oils, and spark plugs, and incidental or consequential damages costs as
explained in the warranty.

provided with the vehicle at the time of delivery.

Operator’s Guide

, THAT failure may not be covered under warranty.

?

22

Q: Are “Genuine” Bombardier replacement parts used in warranty repairs also

covered by the limited warranty coverage?

A: Yes. When installed by an authorized Bombardier ATV dealer, any “Genu-

ine” Bombardier part used in warranty repairs assumes the remaining
warranty that exists on the vehicle.

Q: If I sell my vehicle within the warranty period, will the new owner qualify for

the balance of the limited warranty coverage?

A: Yes, provided the re-sale has been registered with the manufacturer.

Q: How can I receive the best owner assistance?

A: The satisfaction and goodwill of the owners of Bombardier products are

of primary concern to your ATV dealer and Bombardier Inc. Normally, any
problems that arise in connection with the sales transaction or the opera­tion of your vehicle will be handled by your Dealer’s Sales or Service De­partments. It is recognized, however, that despite the best intentions of
everyone concerned, misunderstandings will sometimes occur. Frequent­ly, complaints are the result of a breakdown in communications and can
quickly be resolved by a member of the dealership management. If the
problem already has been reviewed with the Sales Manager or Service
Manager, contact the Dealer Principal himself or the General Manager.

We are always pleased to receive your comments on the Bombardier ATV.

23

LOCATION OF THE IMPORTANT LABELS

The following labels are on your ATV. If missing or damaged, they can be replaced
free of charge. See an authorized Bombardier ATV dealer.

4
5

3

2

1

6

24

11

9

10

V01A0OL

7

8

1

V01M01Y

2

4

V01M04Y

5

V01M05Y

6

V01M02Y

3

V01M03Y

V01M06Y

7

V01M07Y

25

8

V01M08Y

9

V01M09Y

10

V01M05Z

11

V01M0BY

26

HOW TO IDENTIFY YOUR ATV

The main components of your vehicle
(engine and frame) are identified by
different serial numbers. It may some­times become necessary to locate
these numbers for warranty purposes
or to trace your vehicle in the event of
loss. These numbers are required by
the authorized Bombardier ATV dealer
to complete warranty claims properly.
No warranty will be allowed by Bom­bardier Inc. if the engine identification
number (EIN) or vehicle identification
number (VIN) is removed or mutilated
in any way. We strongly recommend
that you take note of all the serial num­bers on your vehicle and supply them
to your insurance company.

Engine and Vehicle
Identification Number
Location

1

V01A0UY

1. EIN (Engine Identification Number)

2. VIN (Vehicle Identification Number)

2

27

CONTROLS/INSTRUMENTS/EQUIPMENTS

14

7

9911 10 12

6
8

5

1

13

19 2 4 3

22

28

V01L1WL

17 1518 26

21

202521

V01L1YL

2324 16

WARNING

Indicates a potential hazard that could result in serious injury or death.

29

NOTE: This section gives basic func-

tions of the various controls of your
ATV. For more details of how to oper­ate one control in conjunction with
some others, refer to OPERATING IN­STRUCTIONS in this
and

Safety Handbook

Operator's Guide

.

1) Throttle Lever

Located on the right side of handlebar.
When pushed, it increases the engine
speed that allows the engagement of
the transmission on the selected gear.

When released, the engine speed
should return automatically to idle and
the vehicle will gradually slow down.

2

3

V01I02Y

1. Throttle lever

2. To accelerate

3. To decelerate

1

2) Front Brake Lever

Located on the right side of handlebar.
When compressed, the brake is ap­plied. When released, it should auto­matically return to its original position.
Braking effect is proportional to the
force applied on the lever and to the
type and condition of the terrain. The
front brake will have also an effect on
rear wheels through the drive train.

See the note at rear brake lever be­low for additional information.

1 2

V01I03Y

1. Brake lever

2. To apply brake

3) Rear Brake Lever

Located on the left side of handlebar.
When compressed, the brake is ap­plied. When released, it should auto­matically return to its original position.
Braking effect is proportional to the
force applied on the lever and to the
type and condition of the terrain.

NOTE: Using the rear brake will have
also an effect on front wheels because
they are interconnected through the
drive train. As on other wheeled vehi­cles, the vehicle weight is transferred
to the front wheels when braking. To
obtain greater stopping efficiency, the
brake system applies more strength
to the front brakes. This will affect ve­hicle handling and steering control
when braking vigorously. Take it into
account when braking.

2

1

30

V01I04Y

1. Brake lever

2. To apply brake

4) Brake Lever Lock

Located on left side of handlebar on
rear brake lever. When applied, it pre­vents the vehicle from moving. Useful
when the brake needs to be locked for
example such as doing a K-turn.

WARNING

Always use the brake lever lock

and

engage the PARK position on
the transmission lever when the
vehicle is not in operation.

WARNING

Make sure parking device is fully
disengaged before operating the
ATV.

When you ride the vehicle, the pro­longed use of brakes may cause
damage to the brake system and
cause loss of braking capacity
and/or fire.

To engage mechanism: Squeeze brake

lever and maintain while moving lever
lock with a finger. Brake lever is now
compressed and applying rear brakes.

1

2

5) Transmission Lever

Located on the left side of steering col­umn. A 5-position lever: P, R, N, H and L.

To change the transmission position,
completely stop vehicle then move le­ver to the desired position while pull­ing lever upward. Do not force lever. If
unable to shift, gently apply throttle to
move ATV and try again.

N

V01I06Y

1. Transmission lever

2. To change position

1

CAUTION: Always completely stop
the vehicle and apply the brake prior
to moving the transmission lever.

P: Parking

This position locks the transmission to
help prevent vehicle movement. Al­ways use when the vehicle is not in
operation. In some circumstances, it
may be necessary to rock the vehicle
back and forth to move the gears in
the transmission to allow the park to
be set.

R: Reverse

This allows the vehicle to go back­ward. The vehicle speed is limited.

2

V01I05Y

1. Brake lever lock

2. To apply parking device

Before moving vehicle in reverse,
ensure the path behind is clear of

WARNING

obstacles or bystanders. Remain

To release mechanism: Squeeze brake

seated.

lever. Lever lock should automatically re­turn to its original position. Brake lever
should return to rest position. Always re­lease parking device before riding.

P/N 704 900 108 31

N: Neutral

This position disengages the transmis­sion to allow manual vehicle move­ment or towing.

H: High gear

This selects the transmission in a
high-gear range. It is the normal riding
position. It allows the vehicle to reach
its maximum speed.

L: Low gear

This selects the transmission in a low­gear range. It is the working position.
It allows the vehicle to move slowly
with the maximum traction and power.

Refer to Electric Gear Shift Button
below for gear shifting.

The gear position is displayed with in­dicator lights. Refer to Electric Gear
Shift Button below.

6) Electric Gear Shift
Button

Located on left side of handlebar.
When pressing on the upper face, it
shifts the transmission to the next
higher gear. When pressing on the
lower face, it shifts the transmission
to the next lower gear.

The lower the gear, the slower the ve­hicle speed and the higher the gear,
the higher the vehicle speed.

Engine must be running to allow gear
change.

The button must be released then
pressed again to perform another gear
shift.

There are 5 gears in each reverse, high
and low gear positions.

7) Start/Stop Button

Located on left side of handlebar. Dual
function switch.

To start engine, press and hold the
button. Release immediately after en­gine is started.

To stop engine, fully release throttle
lever then press the button. It is not
necessary to hold the button.

1

2

V01I07Y

1. Gear shift button

2. Press here to upshift

3. Press here to downshift

13

32

V01I07Z

1. Start/stop button

NOTE: While engine can be stopped
by turning ignition key OFF, we recom­mend the engine be stopped by press­ing the start/stop button.

8) Headlight Dimmer
Switch

Located on left side of handlebar. Tog­gle type switch. It allows selection of
headlight intensity.

If all lights flash continuously, it indi­cates a damaged sensor (gearbox). Al­though the vehicle can still be operat­ed in this condition, downshifting may
increase engine “braking”. Drive
slowly. See an authorized Bombardier
ATV dealer as soon as possible.

1

V01I070

1. Headlight dimmer switch

1

9) Indicator Lights Cluster

NOTE: When first turning switch to
ON (either position), all indicator lights
will turn on for a brief moment. This
validates their operation. Thereafter,
only the lights that are activated will
remain on (Reverse or Neutral, gear
position and engine indicator lights). If
all lights flash, it indicates a particular
malfunction of the transmission or the
electrical system. See an authorized
Bombardier ATV dealer as soon as
possible.

Gear Position Display

Located on left side of cluster. It lights
up to indicate the gear position when­ever the ignition switch is turned on
when the transmission lever is NOT in
PARK or in NEUTRAL position (either
engine running or not).

If all lights flash while shifting gear, it
indicates the shifting is not completed
yet. Simply wait until the shifting com­pletes or retry the shift with the gear
shift button.

V01I08Y

1. Gear position display

Other Indicator Lights

Located on right side of cluster. They
light up to monitor different functions.

If REVERSE and NEUTRAL lights flash
simultaneously, while setting the
transmission lever, it indicates the
selection is not completed yet. The
gears in the transmission are not prop­erly aligned. Simply retry to move the
transmission lever. If it does not work,
try rocking the vehicle back and forth
to move the gears in the transmission
then retry.

If all lights flash continuously, it indi­cates a damaged sensor (sub-trans­mission). Although the vehicle can still
be operated in this condition, down­shifting may increase engine “brak­ing”. Drive slowly. See an authorized
Bombardier ATV dealer as soon as
possible.

33

V01I08Z

1. Engine

2. High intensity

3. Reverse

4. Neutral

1234

10) Speedometer

Located in center of cluster. It indi­cates the speed of the vehicle either in
km/h or MPH. The speedometer is
backlit every time the ignition switch
is turned on (either position).

Engine

Dual function light. When continuous­ly on, it indicates a low oil pressure
condition of the engine. When flash­ing, it indicates the engine is overheat­ing.

This light turns on when the ignition
switch is turned on and remains on un­til engine is running.

CAUTION: If the light does not turn
off right after engine starting, stop
engine. See an authorized Bombar­dier ATV dealer. Do not use the vehi­cle until repaired.

If engine overheats, refer to Engine
Overheat in SPECIAL PROCEDURES.

High Intensity

When the indicator light is ON, it indi­cates the high intensity is selected on
the headlights.

Reverse

When lit, it indicates the transmission
is engaged in reverse.

Neutral

When lit, it indicates the transmission
is in neutral position.

V01I080

1. Speedometer

2. Odometer/trip meter

3. Display selection button

23

1

Odometer/Trip Meter

Combined LCD (Liquid Crystal Dis­play) display. Odometer records the
total distance traveled in either kilome­ters or miles. The trip meter records
the distance traveled either in kilome­ters or miles until it is reset. The last
right digit indicates the tenth of a kilo­meter or a mile. It can be used to ap­proximately monitor the fuel tank
range or distance between two loca­tions for instance.

Display Selection Button

The odometer always appears when
turning the ignition switch ON (either
position). To change the display to the
trip meter, momentarily press the but­ton on the speedometer.

To reset the trip meter, push and
HOLD button until all numbers read
zero (while in trip meter selection).

34

V01I09Y

PRESS ONCE TO SWITCH FROM ODOMETER
TO TRIPMETER OR VICE VERSA. PRESS AND
HOLD TO RESET WHILE IN TRIP METER SE­LECTION

11) Ignition Switch

Located at bottom of cluster.
Key-operated, 3-position switch: OFF,

ON with lights and ON without lights.

NOTE: While engine can be stopped
by turning ignition key OFF, we recom­mend the engine be stopped by press­ing the start/stop button.

Auto Shut-Down

If for some reason, the engine is not
started within 3 minutes approximate­ly, the MPEM (Multi-Purpose Electron­ic Module) will shut down to cut all
electrical system functions. Simply
turn the key to OFF then to ON to re­gain normal use.

12) Choke Knob Lever

Located at bottom of cluster. This de­vice features a 3-position lever to ease
cold start.

V01I0AY

1. Ignition switch

1

Insert key in switch and turn to the de­sired position. To remove key, turn key
to OFF then pull it out.

The ON with lights position, turns on
all lights with either the engine run­ning or not. The headlights automati­cally dim to low intensity. Remember
that having the lights on without the
engine running discharges the battery.
Always turn ignition to OFF after en­gine has been stopped.

V01I0AZ

1. Choke knob lever in the OFF position

V01I0BY

1. Position 1

1

1

35

1

V01I0CY

1. Position 2

Position OFF is for normal use with a
warm engine. Position 1 and 2 will be
used depending on the temperature.
Position 2 applies more choke for low­est temperature.

13) Fuel Tank Cap

Unscrew counterclockwise and re­move cap to allow fuel tank filling then
fully tighten clockwise.

WARNING

Never use an open flame to check
fuel level.

14) Fuel Gauge

Located under cluster, the gauge
shows an approximate amount of the
fuel in tank.

A

B

V01L0IY

A. Empty
B. 1/4
C. 1/2
D. 3/4
E. Full

C

E

D

15) Fuel Valve

Located on left side panel under front
part of seat. 3-position rotary valve:
OFF, ON, RES. Rotate the knob to
align its pointer with ON, OFF or RES.

V01F01Y

1. Align this pointer toward the desired

position

1

36

OFF

Stops fuel supply to carburetor.

CAUTION: Turn valve to OFF posi­tion when ATV is not being operat­ed or when transporting.

ON

Allows fuel to flow to carburetor. This
is the normal position for operation of
the vehicle.

RES (RESERVE)

When fuel is exhausted in the fuel
tank when in the ON position, an
emergency supply of fuel is available
by turning the knob to RES. The re­serve contains approximately 30% of
the fuel tank capacity. Use only this
position when the ON supply is emp­ty.

When down to the reserve, refuel as
soon as possible. Ensure to turn the
valve back to the ON position after re­fuelling.

CAUTION: Improper opening of fuel
valve will restrict the flow of fuel.
Make sure valve is fully opened
while running.

16) Rear Brake Pedal

Located on the right footpeg. When
pressed down, the brake is applied.
When released, it should return to its
original position. Braking effect is pro­portional to the force applied on the le­ver and to the type and condition of
the terrain.

NOTE: The brake will have also an ef­fect on front wheels through the drive
train.

1

V01K01Y

1. Rear brake pedal

17) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.

Follow the usual starting procedure
but use the rewind starter instead of
the electric starter.

Located on left side panel under front
part of seat. Auto-rewind type. To en­gage mechanism, pull handle slowly
until a resistance is felt then continue
to slowly pull the handle until the com­pression stroke peak (strong rotating
resistance) is overpassed then, pull
vigorously. Slowly release handle.

V01L06Y

1. Rewind starter handle

1

37

18) Footpeg

Located on footrest. Use this area to
maintain your feet stable.

1

It also contains the
and

Safety Handbook

Operator’s Guide

that should be
kept in a waterproof bag and remain
with the vehicle at all times.

WARNING

Never leave any heavy or loose
breakable objects in the storage
basket. Always latch cover before
riding. If storage cover is removed
to provide greater carrying area,
ensure that cargo is secured and
will not “fly out” when riding at
speed on rough terrain. Slow
down.

V01K01Z

1. Footpeg

19) Storage Compartment

Located in front of vehicle. Conve­nient location to carry personal articles
such as an a helmet, spare spark
plugs, first aid kit, etc. Unlatch cover,
gently lift then remove cover.

The compartment is equipped with a
drain plug under the tool box. Remove
plug to allow draining when neces­sary. Reinstall plug when finished.

12

V01L07Y

1. Removing cover

2. Tool box

Too l B ox

Located in storage compartment. The
tool box contains tools for basic main­tenance, the

Safety Handbook

Operator’s Guide

.

and the

20) Seat Latch

Located underneath rear end of seat.
It allows the removal of seat to give
access to engine compartment.

1

2

38

V01L0AY

1. Seat

2. Seat latch

Seat Removal

Pull latch upward while gently lifting
rear of seat. Continue lifting move­ment until you can release the front re­taining devices then completely re­move seat.

Seat Installation

Place seat to allow the insertion of the
U-shaped bracket over the rollers.
Gently slide the brackets over rollers
then lower seat. When seat rests in its
position, firmly push seat down to
latch.

Refer to SPECIFICATIONS for carrying
loads and cargo weight distribution
recommendations.

22) Air Duct

Located on rear fenders. They force
the flow of air to cool radiator.

CAUTION: Do not place anything
over air intake ducts.

23) Trailer Hitch

Located on rear axle. Convenient hitch
to install a ball to tow a trailer or other
equipment. Install the proper ball size
as per trailer manufacturer recom­mendations. Refer to SPECIFICA­TIONS for carrying loads and towing
recommendations.

V01L0BY

1. U-shaped bracket

2. Rollers

21

WARNING

Periodically verify the seat lock
pin and tighten if needed. Make
sure seat is securely latched be­fore riding.

21) Front/Rear Cargo
Racks

Located on top of chassis at front and
rear. Convenient racks to carry gear.

WARNING

Ensure to properly secure materi­al to rack. Do not overload. Ensure
load does not interfere with visi­bility and/or steering. Do not carry
passenger(s).

V01L0NY

1. Trailer hitch

1

WARNING

Ensure to install the proper ball
size that matches the equipment
you will tow.

Follow manufacturer instructions for
proper attachment.

24) Radiator Cap

Located at rear of rear panel. It pro­vides access to the radiator filling
neck.

Pull the protector cap to give access to
the radiator cap. When finished, prop­erly reinstall radiator cap then protec­tor cap.

39

1

V01L0EY

1. Protector cap

2. Radiator cap

2

25) 12-Volt Power Outlet

It is located on left side of cluster.
Convenient for handheld spotlight or

other portable equipment.
Remove cap to use. Always reinstall

protective cap after use to protect
against weather.

V01L0FY

1. Protective cap

2. Power outlet

12

Do not exceed the rating capacity. See
SPECIFICATIONS.

An auxiliary supply is available to con­nect additional accessories through a
connector at the rear of vehicle. See
an authorized Bombardier ATV dealer
for more details.

26) Fuses

The electrical system is protected
with fuses. Refer to MAINTENANCE
for details.

40

LIQUIDS

WARNING

Indicates a potential hazard that could result in serious injury or death.

This section specifies the recom­mended liquids and procedures to
check their levels. Refer to MAINTE­NANCE for procedures to replace the
liquids.

Fuel

Recommended Fuel

Use regular unleaded gasoline or gas­ohol containing less than 10% of eth­anol or methanol, available from most
service stations. The gasoline used
must have an octane number of 87
((R + M)/2) or higher.

NOTE: In most service station, pump
octane number corresponds to
(R + M)/2 octane number. Usually a
sticker can be found on the pump.

CAUTION: Never experiment with
other fuels. The use of unrecom­mended fuel can result in vehicle
performance deterioration and dam­age to critical parts in the fuel sys­tem and engine components.

CAUTION: Never mix oil with fuel.
This ATV has a 4-stroke engine. Oil
must be added to engine base only.

Engine/Transmission Oil

Recommended Oil

Always use 4-stroke mineral-based
engine oil that meets or exceeds the re­quirements for API service classifica­tion SF, SG or SH. Always check the API
service label on the oil container to be
sure it includes the letters SF, SG or SH.
Only use high-quality high-detergent oil.

NOTE: The same oil lubricates both
engine and transmission. Do not use
synthetic or semi-synthetic oil. They
affect the clutching calibration.

CAUTION: For proper operation of
the clutching system, do not use
special oil additives. Do not use un­recommended types of oil.

Oil Viscosity

SAE 10W40 is recommended for gen­eral use.

Other viscosity should be used if the
average temperature is outside the
range of the recommended oil. See
chart below.

Fuel Level

WARNING

Never top up the fuel tank before
placing the vehicle in a warm area.
As temperature increases, fuel ex­pands and may overflow. Fuel is
flammable and explosive under
certain conditions. Always wipe
off any fuel or oil spillage from the
vehicle.

41

°C

°F

SAE 10W40

SAE 10W30

SAE 5W30

60

50

40

30

SAE 20W50

20

SAE 15W50

SAE 15W40

10

-10

140

120

100

80

60

40

0

20

V01A0VL

42

-20

-30

0

-20

Oil Level

CAUTION: Check level frequently
and refill if necessary. Do not overfill.
Operating the engine/transmission
with an improper level may severely
damage engine/transmission. Wipe
off any spillage.

2

4. Add oil up to upper mark if required.

5. To add oil, remove seat then un­screw filler cap. Use a funnel to
avoid spillage. Do not overfill.

6. Properly reseat dipstick, reinstall
and tighten filler cap then reinstall
seat.

Engine Coolant

Recommended Coolant

Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi­cally for internal combustion alumi­num engines.

Cooling system must be filled with
water and antifreeze solution (40%
water, 60% antifreeze).

V01C02Y

LH SIDE OF ENGINE

1. Dipstick

2. Filler cap

1

With vehicle on a level surface and en­gine not running, check the oil level as
follows:

1. Pull dipstick out and wipe clean.

1

V01C03Y

1. Pull out dipstick

2. Reinstall dipstick until it bottoms.

3. Remove and check oil level. It
should be between lower and up­per marks.

Coolant Level

WARNING

Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.

Remove seat.

MAX

MIN

V01L0LY

43

With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.

NOTE: When checking level at tem­perature lower than 20°C (69°F), it
may be slightly lower than MIN. mark.

Add coolant up to MAX. mark if re­quired. Use a funnel to avoid spillage.
Do not overfill.

Properly reinstall and tighten filler cap
and reinstall seat.

NOTE: A cooling system that fre­quently requires coolant is the indica­tion of leaks or engine problems. See
an authorized Bombardier ATV dealer.

Brake Fluid

Recommended Fluid

Always use brake fluid meeting the
specification DOT 4 only.

CAUTION: Never use other type of
oil such as mineral-based or syn­thetic oil.

Fluid Level

With vehicle on a level surface, check
brake fluid in reservoir for proper level.
It should be above MIN. mark.

Add fluid as required. Do not overfill.
Clean filler cap before removing.

CAUTION: Use only DOT 4 brake
fluid from a sealed container.

NOTE: A low level may indicate leaks

or worn brake pads. See an authorized
Bombardier ATV dealer.

Front Brake Fluid Reservoir

Turn steering in the straight-ahead po­sition to ensure reservoir is level.

Visually inspect lever boot condition.
Check for cracks, tears etc. Replace if
damaged.

•MIN••MIN•

V01K04Y

Rear Brake Fluid Reservoir

- MAX -

- MIN -

V01K03Y

Battery Electrolyte

Recommended Liquid

It is recommended to use distilled wa­ter.

Electrolyte Level

Place the vehicle on a level surface.
Check electrolyte level by the rear left

inner fender. Use a flashlight if neces­sary. Do not use an open flame.

44

The electrolyte should be between
lower and upper marks. If level is low,
remove battery from vehicle to add
distilled water.

Battery

1

Removal

Disconnect negative BLACK cable first
then positive cable.

WARNING

Always respect this order for dis­assembly; disconnect BLACK neg­ative cable first. Electrolyte or fuel
vapors can be present in engine
compartment and a spark may ig­nite them and possibly cause per­sonal injuries.

Remove the holding straps.
Pull out vent tube from frame.
Remove battery from vehicle being

careful not to tilt it so that electrolyte
flows out of vent tube.

WARNING

Electrolyte is poisonous and dan­gerous. Avoid contact with eyes,
skin and clothing. Wear protective
eyeglasses and a suitable pair of
non-absorbent gloves when re­moving the battery by hand.

U

PPER

LEV

EL/N

IV

EA

U

SU

P

ÉR

IEU

R

LO

W

E

R

LEV

EL/N

IV

E

A

U

IN

FÉR

IEU

R

V01G03Y

1. Upper mark

Properly retighten caps.

Installation

Reinstall battery in vehicle. Fasten bat­tery and make sure to reinstall the
vent tube.

WARNING

Connect positive RED cable first
then negative cable. Always con­nect RED positive cable first.

NOTE: Place the positive RED cable

between holding straps and battery.

CAUTION: Should any electrolyte
spillage occur, immediately wash
off with a solution of baking soda
and water.

Refilling

Place battery on a level surface.
Unscrew caps and add distilled water

up to upper mark as required. Do not
overfill.

V01G05Y

1

1. Cable between battery and strap

45

BREAK-IN PERIOD

Engine

A break-in period of 10 operating
hours is required before running the
vehicle at full throttle.

CAUTION: Never mix oil with fuel.
This vehicle has a 4-stroke engine.
Oil must be added to engine base
only.

During this period, maximum throttle
should not exceed 3/4. However,

brief full acceleration and speed
variations contribute to a good
break-in. Continued wide open throt-

tle accelerations, prolonged cruising
speeds and engine overheating are
detrimental during the break-in period.

10-Hour Inspection

As with any precision piece of me­chanical equipment, we suggest that
after the first 10 hours or 30 days after
the purchase, whichever comes first,
your vehicle be inspected by an autho­rized Bombardier ATV dealer. This in­spection will give you the opportunity
to discuss the unanswered questions
you may have encountered during the
first hours of operation.

The 10-hour inspection is at the
expense of the vehicle owner.

46

PRE-OPERATION CHECK

WARNING

The pre-operation check is very
important prior to operating the
vehicle. Always check the proper
operation of critical controls, safe­ty features and mechanical com­ponents before starting. If not done
as specified here, severe injury or
death might occur.

• Check tire pressure and condition.

• Check wheels and bearings for
wear and damage.

• Check location of controls and en­sure they work properly.

• Verify steering operates freely.

• Activate throttle control lever sev­eral times to ensure it operates
freely. It must return to idle position
when released.

• Activate the brake levers and foot
pedal to make sure the brakes fully
apply. Levers and pedal must fully
return when released.

• Ensure transmission lever is work­ing then reset in PARK position.

• Check operation of ignition and
start/stop switches, headlights,
dimmer switch, taillight, brake light
and indicator lights.

• Check fuel, oil and coolant levels.

• Check for oil leaks on the engine/
transmission and drive train compo­nents.

• Ensure fuel valve is in fully open po­sition (ON).

• Clean headlights and taillight.

• Ensure front storage cover com­partment is properly latched.

• Ensure seat is properly latched.

• If you transport cargo, respect load
capacity. Ensure cargo is properly
secured to the racks.

• If you are pulling a trailer or other
equipment, ensure it respects the
tongue capacity and towing capaci­ty. Ensure trailer is properly secured
to hitch.

• Look and feel for loose parts while
engine is off. Check fasteners.

• Ensure the path of travel is free of
persons and obstacles.

• Drive forward slowly a few feet and
apply all brakes individually to test
them.

Correct any problem you may have
found. See an authorized Bombar­dier ATV dealer as necessary.

47

OPERATING INSTRUCTIONS

General

Engine can be started in any gear
(from 1 to 5).

Transmission lever must be on PARK
or NEUTRAL to allow engine starting.

For your convenience, an override
mode allows to start the engine with
the transmission lever in any position.
Press and hold any brake lever while
pressing the start button.

Initial Cold Starting

Insert key in ignition switch and turn to
ON.

Move the choke lever to position 2
and start the engine.

1

V01I0CY

1. Position 2

NOTE: In severe cold weather, colder
than - 20°C (- 4°F) you may need to
turn the choke on and off a couple of
times to position 1 once engine is
started. Overusing choke may flood
engine and make it hard to start. Refer
to SPECIAL PROCEDURES if it oc­curs.

1

V01I0BY

1. Position 1

Press start/stop button and hold until
engine starts.

WARNING

Do not apply throttle while start­ing.

Release start/stop button immediately
when engine has started.

CAUTION: Do not hold start/stop
button more than 30 seconds. A rest
period should be observed between
the cranking cycles to let starter cool
down. Pay attention not to dis­charge battery.

As soon as the engine starts, move
the lever to position 1. After a few
seconds, move the choke lever to
OFF and release brakes.

Warm Engine Starting

Start the engine as explained above
but without any choke. If the engine
will not start after two 5-second at­tempts with the electric starter, move
choke lever to position 1. Start the en­gine without activating the throttle le­ver. As soon as the engine starts,
move the choke lever to OFF.

48

Emergency Manual
Starting

Manual start is provided in the event
electric start does not work.

If the engine indicator light is turned
off, it indicates the electrical system is
in the auto shut-down mode. Turn the
ignition key OFF then ON to reactivate
it.

Follow the same procedure as starting
procedures above except use the re­wind starter to start instead.

1

V01C01Y

1. Grasp manual starter handle firmly and crank
engine

Stopping the Engine

Release throttle and completely stop
the vehicle.

Apply the parking device.
Shift to 1
Set transmission lever in PARK posi-

tion.
Press the start/stop button
Turn key in ignition switch to OFF.
Remove key from ignition switch.

st

gear.

Shifting the Transmission

Let engine idle to warm up.
Apply brakes and select the desired

gear range H/L.
NOTE: The brake must be applied

when the transmission lever is en­gaged in the park position. Shift to 1
gear.

Release brakes.

CAUTION: Make sure parking de­vice is fully disengaged before op­erating the ATV.

Gradually press the throttle lever to in­crease engine speed and thus engag­ing the centrifugal clutch.

When vehicle speed increases, slight­ly release throttle lever while pressing
the electric gear shift button to upshift
one gear then release button and
press throttle lever again to continue
the acceleration. Repeat until the last
gear if desired or until vehicle speed
you want is attained.

NOTE: While any throttle position can
be used during shifting, it is recom­mended to slightly release the throttle
position during upshifting.

Reverse the sequence to downshift.

Using the Reverse

CAUTION: When changing from
forward to reverse, or vice-versa, al­ways completely stop the vehicle
and apply the brake prior to moving
the transmission lever.

The same procedures as Shifting the
Transmi ssi on above apply except for

the following.
Set the transmission lever in REVERSE

position.

st

49

SPECIAL PROCEDURES

Park Release

In some rare occasions, the transmis­sion may be locked in the PARK posi­tion and the driver cannot operate the
vehicle.

If this occurs, do the following:
– Apply the parking device.

WARNING

If the parking device is not applied,
the vehicle could move down
when the park will be released.

– Fully turn steering on RH side.
– Use the special tool in toolbox. En-

sure to completely close the tab of
the tool.

1

2

2

V01B03Y

1. Close tab

2. Curved tip

1

– Use the curved tip of the tool to

push the park pin downward to re­lease the transmission lever hole
WHILE moving the transmission le­ver away the park position. See il­lustrations.

1

V01B06Y

1. Use the special tool

2. Pin

– Re-store the special tool in the tool-

box.

– Release the parking device.

Flooded Engine

When the engine does not start after
several attempts, the engine may be
fuel flooded. Proceed as follows.

Turn ignition switch to ON and ensure
choke is not applied.

50

Ensure the transmission lever is in
PARK.

Fully press throttle lever and hold
while starting the engine. Try several
times.

As soon as the engine starts, release
throttle lever. Do not race engine.

If it does not work:

Disconnect spark plug cables.
Clean the spark plug area then remove

spark plugs (tools are supplied in tool
box).

Crank engine several times. Install
clean dry spark plugs if possible.

Start engine as explained above. If en­gine continues to flood, see an autho­rized Bombardier ATV dealer.

Engine Overheat

If engine overheats and indicator light
starts to flash, try the following:

Ensure air ducts are not obstructed.
Check radiator fins. See Maintenance

section.
Reduce vehicle speed but try to keep

vehicle moving to supply air to radia­tor. If engine is still overheating after
approximately one minute, stop vehi­cle and set transmission to PARK. Suc­cessively apply and remove choke a
few times while varying throttle posi­tion. Then, fully apply choke and stop
engine.

Inspect radiator area and clean as nec­essary. Check coolant level and refill if
possible.

Let engine cool down.
See an authorized Bombardier ATV

dealer as soon as possible.

Post-Operation Care

When vehicle is used in salt-water en­vironment (beach area, launching/
loading boats etc.), rinsing the vehicle
with fresh water is necessary to pre­serve vehicle and its components.
Metallic parts lubrication is highly rec­ommended. Use BOMBARDIER LUBE.
This must be performed at the end of
each operating day.

When vehicle is operated in muddy
conditions, rinsing the vehicle is rec­ommended to preserve vehicle and its
components and to keep lights clean.

Emergency Shifter

If the shifting system is not operation­al, you may use the emergency
shifter. It allows to change the trans­mission gear when the vehicle is not
in motion. You set the desired gear
once then go back home while the
transmission remains in this gear. No
gear change can take place since the
shifting system is not operational. The
shifter shaft end is located on rear side
of engine.

Place transmission on PARK position.
Remove seat.
– Use the special key in the tool box

to rotate the emergency shifter.
Open the tab of the tool approxi­mately at a right angle (90°). Insert
the screwdriver included in the tool
box at the end of the special tool so
that it can be used as a handgrip.

51

A

1

V01B02Y

1. Insert the screwdriver here as a handgrip
A. Open tab at a right angle (90°)

1

WARNING

The exhaust pipe can be very hot.
Wear gloves and/or allow exhaust
pipe to cool.

Insert the tool to the end of the shifter
shaft.

2 3

V01E05Y

1. Use screwdriver as a handgrip

2. Pull to downshift

3. Push to upshift

NOTE: The 2nd or 3rd gear is recom-
mended.

Remove the special tool. Close the tab
of the tool. Replace tool and screw­driver in tool box.

Replace seat.

1

V01C08Y

1. Emergency shifter shaft. Insert special tool
here

Pull special tool upward to downshift
and push downward to upshift. Place
the gear in the desired position.

52

Storage and Preseason
Preparation

When a vehicle is not in use for more
than one month, proper storage is a
necessity.

See an authorized Bombardier ATV
dealer for proper procedures.

When using your ATV after storage, a
preparation is required. See an autho­rized Bombardier ATV dealer for proper
procedures.

MAINTENANCE CHART

Refer to MAINTENANCE section of

LUBRICATION AND MAINTENANCE CHART

Engine/transmission oil level ✔✔ CUSTOMER
Engine/transmission oil and filter replacement ✔✔CUSTOMER

Transmission oil strainer cleaning
Engine head fasteners ✔✔DEALER
Engine mount fasteners ✔✔DEALER
Exhaust system/spark arrester ✔✔DEALER

ENGINE/
TRANSMISSION

FUEL SYSTEM

ELECTRICAL

DRIVE TRAIN

Condition of seals ✔✔DEALER
Coolant level ✔✔ CUSTOMER
Coolant replacement ✔ DEALER
Cooling system condition ✔✔DEALER
Radiator cap pressure test ✔✔DEALER
Radiator condition/cleanliness (air ducts and radiator fins) ✔✔CUSTOMER
Rewind starter rope condition ✔ DEALER
Clutch and transmission operation ✔ DEALER
Air filter cleaning/draining ✔ CUSTOMER
Air filter and foam replacement ✔ CUSTOMER
Fuel lines and connections ✔✔DEALER
Carburetor adjustment ✔✔DEALER
Spark plugs inspection/replacement ✔✔DEALER
Battery electrolyte level and vent condition ✔✔ CUSTOMER
Battery connections and vent condition ✔ DEALER
Wiring harnesses, cables and lines ✔✔DEALER
Condition of ignition switch and start/stop switch ✔✔DEALER

Condition of lighting system
(HI/LO intensity, brake light, etc.)

Headlight beam aiming ✔✔CUSTOMER
Drive shaft boot inspection and protector condition ✔✔ CUSTOMER
Drive shaft joint inspection ✔ DEALER
Front propeller shaft joint lubrication (grease fitting) ✔ DEALER
Rear propeller shaft joint lubrication (grease fitting) ✔ DEALER
Wheel bearing condition ✔ DEALER

Front differential and rear axle oil level, seals and
vent condition

Front differential and rear axle oil replacement,
seals and vent condition

Shop Manual

for more details.

INITIAL 10-HOUR

INSPECTION ➀

EVERY

25 HOURS

EVERY

50 HOURS

✔✔DEALER

✔✔ DEALER

EVERY 100 HOURS

OR ONCE A YEAR

TO BE

DEALER

➁

✔ DEALER

PERFORMED BY

53

STEERING/
CONTROL
SYSTEMS

SUSPENSION

BRAKE

BODY/FRAME

LUBRICATION AND MAINTENANCE CHART

INITIAL 10 -HOUR

INSPECTION ➀

EVERY

25 HOURS

EVERY

50 HOURS

EVERY 100 HOURS

Handlebar fastener tightness ✔ DEALER
Throttle condition ✔✔DEALER
Choke condition ✔✔DEALER
Steering system mechanism ✔✔DEALER
Tie rod ends ✔ DEALER
Tire pressure ✔✔ CUSTOMER
Wheel mount tightness and stud lubrication ✔✔CUSTOMER
Wear and condition of tires ✔ CUSTOMER
Front wheel alignment and steering adjustment ✔✔DEALER
Swing arm condition ✔ DEALER
Shock absorber condition ✔ DEALER
Brake fluid level front/rear ✔✔ CUSTOMER
Brake fluid replacement front/rear ✔ DEALER
Brake cable condition ✔✔DEALER
Brake cable adjustment ✔✔ DEALER
Brake pad condition ✔ DEALER
Brake system condition (discs, hoses etc.) ✔ DEALER
Engine compartment ✔✔CUSTOMER
Skid plate condition ✔✔CUSTOMER
Frame condition ✔ DEALER
Hitch/trailer ball condition (if installed) ✔✔CUSTOMER
Fastener condition/tightness ✔ CUSTOMER
Seat latch ✔ CUSTOMER
Front storage compartment cover latch condition ✔ CUSTOMER
Vehicle cleaning and protection ✔ CUSTOMER

OR ONCE A YEAR

TO BE

PERFORMED BY

➀To be performed by an authorized Bombardier ATV dealer.
➁Required every 5 years only.

NOTE: Some riding conditions and hauling loads may result in requiring more
frequent maintenance. See a Bombardier ATV dealer. Some items are part of the
pre-operation checks and must always be performed prior to operating the vehi­cle.

54

MAINTENANCE

WARNING

Indicates a potential hazard that could result in serious injury or death.

WARNING

Unless otherwise specified, en­gine should not be running for all
maintenance procedures.

WARNING

Should removal of a locking device
(e.g. lock tabs, self-locking fasten­ers, etc.) be required when under­going disassembly/assembly,
always replace with a new one.

The following covers the maintenance
items that can be made by the cus­tomer if desired. Other items found in
maintenance chart must be performed
by an authorized Bombardier ATV dealer.

Lubrication

Among other things, this section gives
the procedures to replace the liquids.
Refer to LIQUIDS for procedures to
check levels and refill.

Oil Change and Oil Filter
Replacement

Oil and filter are to be replaced at the
same time. Oil change should be done
with a warm engine.

WARNING

The engine oil can be very hot.
Wait until engine oil is warm.

Ensure vehicle is on a level surface.
Clean the drain plug area.
Remove dipstick.
Place a drain pan under the engine

drain plug area.

Unscrew drain plug.

1

V01A0AY

1. Oil drain plug

Wait a while to allow oil to flow out of
oil filter.

Carefully unscrew oil filter and as soon
as it can be removed from the engine,
turn it upright. Discard filter.

NOTE: Be sure that the old filter O­ring is removed.

Use Bombardier oil filter only. See an
authorized Bombardier ATV dealer.

CAUTION: Only use Bombardier
high pressure filter. The Bombardier
filter is specifically designed for this
engine. This filter does not operate at
the same pressure as other brands.
Using a non-recommended filter may
cause serious engine/transmission
damage.

55

Lubricate the O-ring on the filter with
engine oil. Install the new filter then
screw one full turn after O-ring contact.

Wipe out any oil spillage on engine.
Change gasket on drain plug. Clean

gasket area on engine and drain plug
then reinstall plug. Refill engine at the
proper level with the recommended
oil. Refer to SPECIFICATIONS for ca­pacity.

Start engine and let idle for a few min­utes. Ensure oil filter area and drain
plug areas are not leaking.

Stop engine. Wait a while to allow oil
to flow down to crankcase then check
oil level. Refill as necessary.

Dispose oil as per your local environ­mental regulations.

1 2

3

Other Components

CAUTION: Do not lubricate throttle
and brake cables.

Occasionally, wheel nuts should be re­moved to apply anti-seize lubricant on
studs to ease further removal. This is
particularly important when vehicle is
used in salt-water environment or in
mud. Remove one nut at a time, lubri­cate then retorque.

Maintenance

Engine/Transmission

NOTE: Valve adjustment is not required
on this engine.

Periodically check the engine, the radi­ator area and the air ducts for cleanli­ness. Ensure air ducts are unobstruct­ed to allow air flow going to the radiator.

An access hole is available to inspect
the radiator condition and to give ac­cess for cleaning.

Remove seat.
Push on the center of the access plug

while pulling on the edge and remove
plug.

V01L2AY

1. Access plug

2. Push in center and pull edge

3. Radiator fins

Inspect radiator fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.

Remove the deposits as much as you
can with your hands. If water is avail­able in proximity, try rinsing the radia­tor fins.

If available, use a garden hose to rinse
the radiator fins.

WARNING

Never clean radiator with your
hands when it is hot. Let the radi­ator cool down before cleaning.

CAUTION: Be careful not to damage
the radiator fins when cleaning. Do
not use any object/tool that could
damage the fins. The fins are purpose­ly thin parts to allow efficient cooling.
When hosing, use low pressure only.

Properly reinstall access plug and seat.

56

Spark Arrester

The muffler must be periodically purged
of accumulated carbon.

WARNING

Never run engine in an enclosed
area. Never perform this operation
immediately after the engine has
been run because exhaust system
is very hot. Make sure that there
are no combustible materials in
the area. Wear eye protection and
gloves. Never stand behind the ve­hicle while purging exhaust sys­tem. Respect all applicable laws
and regulations.

Select a well-ventilated area and make
sure the muffler is cool.

Place transmission on PARK position.
Remove the clean-out plug from muffler.

Fuel System

Air Filter Cleaning/Draining

Periodically inspect air filter box drain
plugs for water or deposits.

1

3

2

V01F04Y

1. Air filter box

2. Drain plugs

3. Clamp

V01C05Y

1. Clean-out plug

2. Muffler

12

Block the end of muffler with a shop
rag and start engine.

Momentarily increase engine RPM
several times to purge accumulated
carbon out of the muffler.

Stop engine and allow muffler to cool.
Reinstall the clean-out plug.

NOTE: If vehicle is used in dusty area,
inspect more frequently than speci­fied in maintenance chart.

If water/deposits are found, squeeze
and remove the clamps. Pull drain
tubes out.

CAUTION: Do not start engine when
water is found in the drain tubes.

When water/deposits are found, the air
filter must be inspected/dried/replaced
depending on its condition.

Remove air filter as explained below.

57

Air Filter Removal

Remove seat.
Release clamps and remove air filter

box cover.

1

2

V01F05Y

1. Release clamps

2. Lift to remove

Remove air baffles, air filter and foam.

1

1

V01F07Y

1. Air filter

1

V01F08Y

1. Foam

V01F06Y

1. Air baffle

58

Clean inside of air box.
Wash air filter and foam with warm

water and mild detergent as neces­sary.

Squeeze foam to remove excess wa­ter. Let dry air filter and foam thor­oughly.

If air filter element or foam is dirty, re­place with a new one.

CAUTION: Never remove or modify
any component in the air box. Al­ways use genuine parts when replac­ing air filter and foam. The engine
carburetion is calibrated to operate
specifically with these components.
Otherwise, engine performance deg­radation or damage can occur.

NOTE: Slight dust may be cleaned us-

ing a low-pressure airgun. Blow com­pressed air backward of operating air
flow.

Properly reinstall removed parts in the
reverse order of their removal.

Electrical

Battery

WARNING

Never charge a battery while in­stalled in vehicle.

Clean battery post with a wire brush.
Apply dielectric grease on post to pro­tect against oxidation.

Fuses

If a fuse is damaged, replace it by one
of the same rating.

CAUTION: Do not use a higher rated
fuse as this can cause severe damage.

Fuses are located in engine compart­ment on LH side of battery.

Fuses are identified by a number lo­cated beside the fuse.

1

4

V01G02Y

1. Ignition system

2. Accessories (power outlet and auxiliary
supply)

3. Solenoids

4. Fan

5. MPEM (Multi-Purpose Electronic Module)

6. Charging system

1

2

2

3

3

4

5

5

6

6

15

15

15

15

20

30

Bulb Replacement

Always check light operation after re­placement.

Headlights

Remove sealed beam.

V01G04Y

1. Battery

2. Fuse holder

V01A02Z

1. Remove screws and lift up the sealed beam
cover

Properly reinstall removed parts in the
reverse order of their removal.

21

1

59

Adjust beam aiming as follows:
Turn knobs to adjust beam height and

side orientation to your convenience.
Adjust both headlights evenly.

Indicator Light Replacement

If one LED is burnt in the indicator light
cluster, see an authorized Bombardier
ATV dealer for replacement of the light
cluster.

Speedometer Bulbs

Each bulb can be replaced individually.
Proceed as follows:

Remove the screw on each side of the
steering cover.

Remove the choke knob lever.

V01A02Y

1. Headlight

2. Beam height adjustment

3. Beam side adjustment

213

Taillight Bulb Replacement

Unscrew lens screws to expose bulb.
Push bulb in and hold while turning

counterclockwise to release.
Install the new bulb by first pushing in

while turning clockwise.

2

V01L0HY

1. Lens

2. Screws

12

2

1

V01A01Y

1. One screw on each side

2. Remove the choke knob lever

Pull up the steering cover.
Remove the two nuts under speed-

ometer and unplug the connector.

60

1

V01G06Y

1. Remove the two nuts

2. Unplug the connector

2

Using a small screwdriver, pry cap out
to expose bulb socket.

1

V01I0DY

1. Pull bulb out

Reinstall new bulb using long nose pli­ers. Turn bulb socket clockwise to
lock.

Drive Train

Drive Shaft Boot/Protector
Inspection

Visually inspect drive shaft protectors
and boot conditions. Check protectors
for damage or rubbing against shafts.
Check boots for cracks, tears, leaking
grease etc. Repair or replace damaged
parts as necessary.

V01I0EY

1. Speedometer

2. Pry cap out

12

Insert a small screwdriver in socket
slot and turn counterclockwise until
stopped.

Use small long nose pliers to pull bulb
out or carefully pry out using a small
screwdriver.

2

1

V01L1XY

1. Drive shaft protector

2. Drive shaft boots

61

Tires/Wheels

Tire Pressure

WARNING

Tire pressure greatly affects vehi­cle handling and stability. Under­pressure may cause tire to deflate
and rotate on wheel. Overpressure
may burst the tire. Always follow
recommended pressure. Since tires
are low-pressure types, a manual
pump should be used.

Check pressure when tires are “cold”
before using the vehicle. Tire pressure
changes with temperature and alti­tude. Recheck pressure if one of
these conditions has changed.

For your convenience, a pressure
gauge is supplied in tool box.

TIRE PRESSURE

FRONT REAR

RECOMMENDED

48 kPa
(7 PSI)

38 kPa

(5.5 PSI)

V01A0BY

At installation, it is recommended to
apply anti-seize lubricant on threads.
Gently tighten nuts in a criss-cross
sequence then apply a final torque of
75 N•m (55 lbf•ft).

MINIMUM

45 kPa

(6.5 PSI)

35 kPa
(5 PSI)

Although the tires are specifically de­signed for off-road use, a flat may still
occur. Therefore, it is recommended
to carry a tire pump and a repair kit.

Tire/Wheel Condition

Check tire for damage and wear. Re­place if necessary.

Do not make a tire rotation. The front
and rear tires have a different size. The
tires are directional and their rotation
must be kept in a specific direction for
proper operation.

Wheel Removal

Loosen nuts then lift vehicle. Place a
support under vehicle, as shown. Re­move nuts then remove wheel.

62

1

V01A08Y

1. Taper side of nut

Wheel Bearing Condition

Push and pull the wheels from the up­per edge to feel the play. See an au­thorized Bombardier ATV dealer if
there is any play.

V01A0MY

Skid Plate Condition

Check tightness of fasteners and con­dition of plate for cracks or other dam­age. Properly retighten fasteners as
necessary and have skid plate re­placed if damaged.

Hitch/Trailer Ball Condition

Check tightness of fasteners and
tightness/condition of trailer ball. Prop­erly retighten as necessary and re­place ball if worn.

Fasteners

Check fastener condition and tight­ness on the vehicle. Retighten as re­quired.

Brake

Front Brake

The front brakes are hydraulic disc
types. These brakes are self-adjusting
and require no adjustment.

Suspension

Inspect shock absorber for oil leaks
and fasteners for tightness. See an au­thorized Bombardier ATV dealer as
necessary.

Body/Frame

Engine Compartment

Check engine compartment for any
damage and leaks. Ensure all hose
clamps are properly secured and no
hose is cracked, kinked or otherwise
damaged.

Inspect muffler, battery and reservoir
fastening devices. Check electrical
connections for corrosion and tight­ness.

Replace or have damaged parts re­paired.

Seat Latch

Remove seat and check latch mecha­nism and pin for wear. See an autho­rized Bombardier ATV dealer for parts
replacement if damaged.

Front Storage Compartment
Latch

Check latch condition. See an autho­rized Bombardier ATV dealer for parts
replacement if damaged.

Vehicle Cleaning and
Protection

Painted parts which are damaged
should be properly repainted to pre­vent rust.

When required, wash the body with
hot water and soap (only use mild de­tergent). Apply non-abrasive wax.

CAUTION: Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.

63

CARGO AND TRANSPORTATION

WARNING

Indicates a potential hazard that could result in serious injury or death.

Cargo

WARNING

The vehicle handling, stability and
braking distance are affected when
loading racks and using the vehicle.
Correct loading and weight distri­bution are therefore important. Nev­er overload, tow or carry cargo
improperly. Always ensure the car­go is safely secured and properly
distributed on the rack(s) before op­erating the vehicle. Safely reduce
speed according to terrain condi­tions when carrying cargo or pull­ing a trailer. Allow greater distance
for breaking. Always secure cargo
as low as possible on the rack(s) to
reduce the effect of a higher center
of gravity. Failure to follow the rec­ommendations here could cause
changes in vehicle handling which
could lead to an accident resulting
in severe injuries including the pos­sibility of death. For more informa­tion, see the

When cargoing vehicle, respect these
maximum loads.

Safety Handbook

.

TOTAL LOAD ALLOWED:

220 kg (485 lb)

(includes driver, all other loads

and added accessories)

80 kg (175 lb)

Includes rear
rack and
tongue load

V01L0VZ

45 kg (90 lb)

Includes front

rack and storage

compartment

Transportation

When transporting a vehicle, secure
vehicle to trailer with suitable tie­downs. Using ordinary ropes is not
recommended.

64

Place the fuel valve to OFF position.
Select the PARK position and set the

parking device.
Secure the vehicle to front by the front

bumper and rear by the frame.

CAUTION: Attaching vehicle at oth­er locations may damage the vehi­cle.

V01A09Y

65

TROUBLESHOOTING

SYMPTOM:

Possible causes What to do

1. Ignition switch is in the OFF
position.

2. Transmission is not set on the
PARK or NEUTRAL.

3. Burnt fuse. Check MPEM supply fuse and solenoids fuse.

4. Weak battery or loose
connections.

SYMPTOM:

Possible causes What to do

1. Burnt fuse. Check ignition fuse condition.

2. Mixture not rich enough to start
cold engine.

3. Flooded engine (spark plugs wet
when removed).

4. No fuel to the engine
(spark plugs dry when
removed).

5. Spark plug/ignition (no spark). Check ignition fuse condition. Remove spark plugs

6. Engine compression. As the engine is pulled over with the rewind starter,

Engine does not turn

Place switch in the ON position.

Set transmission either in PARK or in NEUTRAL or
use the override mode.

Check charging system fuse. Check connections and
terminals condition. Have the battery checked.
Contact an authorized Bombardier ATV dealer.

Engine turns over but fails to start

Check fuel tank level and check starting procedure,
particularly use of the choke.

Refer to SPECIAL PROCEDURES.

Check fuel tank level; turn fuel valve to ON (also try
on RES). A failure of the fuel pump or carburetor may
have occurred. Contact an authorized Bombardier
ATV dealer.

then reconnect to spark plug caps. Check that ignition
switch is at the ON position. Start engine with spark
plugs grounded to engine away from spark plug
holes. If no spark appears, replace spark plugs. If
trouble persists, contact an authorized Bombardier
ATV dealer.

“cycles” of resistance should be felt as piston goes
past top dead center. If no pulsating resistance is felt,
it suggests a major loss of compression. Contact an
authorized Bombardier ATV dealer.

SYMPTOM:

Possible causes What to do

1. Fouled or damaged spark plug. Check item Engine turns over but fails to start.

2. Lack of fuel to engine. Check item Engine turns over but fails to start.

3. Carburetor adjustments. Contact an authorized Bombardier ATV dealer.

4. Engine is overheating. Check Engine Overheat in SPECIAL PROCEDURES.

Engine lacks acceleration or power

If overheating persists, contact an authorized
Bombardier ATV dealer.

66

SYMPTOM:

Possible causes What to do

1. Faulty spark plugs (carbon
accumulation).

2. Engine is running too hot. See Engine lacks acceleration or power.

3. Ignition timing is incorrect or
there is an ignition system failure.

4. Improper carburetor setting. Contact an authorized Bombardier ATV dealer.

Engine backfire

See Engine turns over but fails to start.

Contact an authorized Bombardier ATV dealer.

SYMPTOM:

Possible causes What to do

1. Fouled/damaged/worn spark
plugs.

2. Water in fuel. Drain fuel system and refill with fresh fuel.

SYMPTOM:

Possible causes What to do

1. Engine. See Engine lacks acceleration or power.

2. Parking device. Ensure brake lever lock is completely removed.

SYMPTOM:

Possible causes What to do

1. Engine idle is set too low. Contact an authorized Bombardier ATV dealer.

SYMPTOM:

Possible causes What to do

1. Engine/transmission oil level is
low.

2. Transmission shifting system. Try depressing the throttle lever more while shifting.

3. Improper oil type. Drain oil in engine and use recommended oil only.

4. Transmission. See an authorized Bombardier ATV dealer.

SYMPTOM:

Possible causes What to do

1. Transmission gears are in a
position that prevents the
transmission lever to work.

Engine misfire

Clean/verify spark plugs and heat range. Replace as
required.

Vehicle cannot reach full speed

Engine indicator light irregularly flashes at idle speed

Transmission does not shift smoothly

Refill engine with recommended oil at the proper
level.

Transmission lever is hard to move

Rock the vehicle back and forth to move the gears in
the transmission and allow the transmission lever to
be set.

SYMPTOM:

Possible causes What to do

1. Park does not disengage. See Park Release in SPECIAL PROCEDURES.

Transmission lever is hard to move away from the park

67

SPECIFICATIONS

BOMBARDIER TRAXTER

VEHICLE MODEL NUMBER 7400

ENGINE

Type 511 BOMBARDIER-ROTAX, 4 stroke. Longitudinal mount,

Number of cylinder Single cylinder

Number of valve 2 valves with hydraulic lifters (no adjustment)

Displacement 498 cc (30.3 cu. in)

Compression ratio 9:1

Lubrication Wet sump with replaceable oil filter (lubrication of engine

Oil filter BOMBARDIER-ROTAX

Decompressor Automatic

Exhaust system Nelson, stainless steel, USDA approved

TR AN SM IS SI ON

Clutch 1 centrifugal and 1 multi-disc hydraulicaly controlled

Transmission

COOLING

Type Liquid cooled

Radiator Rear mounted with thermostatic fan

CARBURETION

Carburetor make and type

Idle speed ± 50 1050 RPM

Low-speed screw adjustment ± 1/8 1

Fuel pump make and type Mikuni, external (vacuum-operated)

ELECTRICAL

Magneto generator make and type Denso, 400 W @ 6000 RPM

Ignition type IDI (Inductive Discharge Ignition)

Ignition timing Not adjustable

Engine RPM limiter 7500 RPM (any gear in forward)

Vehicle speed limiter 15 km/h (9 MPH) in reverse

Spark plug make and type NGK DR8EA

Number of spark plug 2

Spark plug gap 0.6 to 0.7 mm (0,024 to 0,027 in)

Battery 12 V, 19 A (21 A, optional). Electrolyte type battery

Starting system

Headlight 2 x 55 W, H4703

Taillight and stop light 8/27 W, 1157

Pilot lamp cluster LEDS, 3 V approx.

liquid cooled, OHV

and transmission simultaneously)

Dual range (HI-LO) with park, neutral and reverse.
5 speeds. Electronically controlled hydraulic shift.
Limited vehicle reverse speed

Mikuni BST34. Constant depression type with manual
choke

Electric start and manual rewind starter. Start in any gear
(with brake applied)

68

FUSES

Ignition (no. 1) 15 A
Accessories (no. 2) 15 A (power outlet and auxiliary supply)
Solenoids (no. 3) 15 A
Fan (no. 4) 15 A
MPEM (Multi-Purpose Electronic

Module) (no. 5)
Charging system (no. 6) 30 A

DRIVE TRAIN

Front differential Shaft driven/single auto-lock differential (shear pump)
Rear axle Shaft driven/solid axle

SUSPENSION

Front

Rear

TIRES

Pressure

Size

WHEELS

Size

Wheel nut torque 75 N•m (55 lbf•ft)

BRAKES

Front Brembo hydraulic, 2 discs
Rear Brembo hydraulic, 1 disc
Parking Park through transmission. LH brake lever includes a lock

LOADING CAPACITY

Front rack 40 kg (90 lb) includes front storage tray
Rear rack 80 kg (175 lb) includes tongue load

Total vehicle load allowed

GVWR (Gross Vehicle Weight Rating) 540 kg (1200 lb)
Towing capacity 500 kg (1100 lb)
Tongue capacity 14 kg (30 lb) included with rear rack
Front storage tray 10 kg (22 lb) included with front rack

20 A

Type Independent suspension — double A-arm

178 mm (7 in)

Tra ve l

Rigid swing-arm

Typ e

190.5 mm (7.5 in)

Tra ve l

Front 48 kPa (7 PSI) recommended, 45 kPa (6.5 PSI) minimum
Rear 38 kPa (5.5 PSI) recommended, 35 kPa (5 PSI) minimum
Front 635 OD x 203 W x 305 ID mm (25 x 8 x 12 in)
Rear 635 OD x 254 W x 305 ID mm (25 x 10 x 12 in)

Front 305 dia. x 165 W mm (12 in x 6.5 in)
Rear 305 dia. x 203 W mm (12 in x 8 in)

220 kg (485 lb) includes driver, all other loads and added
accessories

69

DIMENSIONS

Dry mass 343 kg (755 lb)
Overall length 2071 mm (81.5 in)
Overall width 1194 mm (47 in)
Overall height 1143 mm (45 in)
Wheel base 1296 mm (51 in)

Wheel track

Turning radius 3.3 m (11 ft)
Toe-in adjustment 0 mm (0 in)

Front and under

Ground clearance

Weight distribution (front/rear) 49/51%

LIQUIDS

Oil type (engine and transmission)

Coolant

Fuel

Differential

Hydraulic brake Brake fluid, DOT 4
Propeller shaft joint grease Shell, Alvania EP-2 only

CAPACITIES

Vehicle range

Fuel tank

Engine/transmission oil

Coolant 2.5 L (2.2 U.S. quarts)

Differential

engine
Rear axle 188 mm (7.4 in)

Front 992 mm (39 in)
Rear 940 mm (37 in)

244 mm (9.6 in)

SAE 10W40, 4-stroke mineral-based engine oil.
API classification SF, SG or SH. Do not use synthetic or
semi-synthetic oi

Ethyl glycol/water mix (60% coolant, 40% water).

Use coolant specifically designed for aluminum engines
Type Regular unleaded gasoline
Octane 87 (R + M)/2 or higher
Front Synthetic polyolester oil 75W90 (API GL-5)
Rear Synthetic polyolester oil 75W90 (API GL-5)

Approximately 10 hours depending on many factors such

as temperature, operating conditions and load

20 L (5.7 U.S. gal) including approximately 6 L

(1.6 U.S. gal) reserve

Oil change with filter: 2.5 L (2.3 U.S. quarts).

Total: 3 L (3.2 U.S. quarts)

Front 650 mL (22 U.S. oz)
Rear 300 mL (10 U.S. oz)

l

OD = outside diameter
ID = inside diameter
dia. = diameter

W = width
OHV = overhead valve
LEDS = light-emitting diodes

BOMBARDIER INC. reserves the right to make changes in design and specifica­tions and/or to make additions to, or improvements in its products without im­posing any obligation upon itself to install them on its products previously manu­factured.

70

SI* METRIC INFORMATION GUIDE

BASE UNITS

DESCRIPTION

length .................................................

mass...................................................

force ...................................................

liquid ...................................................

temperature........................................

pressure..............................................

torque .................................................

land velocity........................................

PREFIX

kilo ......................

centi....................

milli .....................

micro...................

TO CONVERT

in.........................................................

in.........................................................

in² .......................................................

in³ .......................................................

ft .........................................................

oz........................................................

lb.........................................................

lbf .......................................................

lbf•in ..................................................

lbf•ft ...................................................

lbf•ft ...................................................

PSI ......................................................

imp. oz................................................

imp. oz................................................

imp. gal...............................................

imp. gal...............................................

U.S. oz ................................................

U.S. gal ...............................................

MPH ...................................................

Fahrenheit...........................................

Celsius................................................

hp .......................................................

SYMBOL

k........................

c........................

m.......................

µ........................

CONVERSION FACTORS

UNIT

meter.................................

kilogram.............................

newton ..............................

liter.....................................

Celsius...............................

kilo pascal ..........................

newton-meter....................

kilometer per hour .............

PREFIXES

MEANING

one thousand.....................

one hundredth of...............

one thousandth of .............

one millionth of..................

TO ➀

mm ....................................

cm......................................

cm² ....................................

cm³ ....................................

m .......................................

g.........................................

kg.......................................

N ........................................

N•m ...................................

N•m ...................................

lbf•in .................................

kPa.....................................

U.S. oz ...............................

mL .....................................

U.S. gal ..............................

L.........................................

mL .....................................

L.........................................

km/h...................................

Celsius...............................

Fahrenheit..........................

kW .....................................

SYMBOL

m
kg
N
L
°C
kPa
N•m
km/h

VALUE

1000

0.01

0.001

0.000001

MULTIPLY BY

25.4

2.54

6.45

16.39

0.3

28.35

0.45

4.4

0.11

1.36
12

6.89

0.96

28.41

1.2

4.55

29.57

3.79

1.61
(°F - 32) ÷ 1.8
(°C x 1.8) + 32
.75

* The international system of units abbreviates SI in all languages.

➀ To obtain the reverse sequence, divide by the given factor. To convert milli-

meters to inches, divide by 25.4.

NOTE: Conversion factors are rounded off to 2 decimals for easier use.

71

ATV MODEL No. _________________________________________________

VEHICLE

IDENTIFICATION NUMBER (V.I.N.) _________________________________

ENGINE

IDENTIFICATION NUMBER (E.I.N.) _________________________________

IDENTIFICATION NUMBER (E.I.N.) _________________________________

Purchase Date

year month day

Warranty Expiry Date

year month day

To be completed by the dealer at the time of the sale

DEALER IMPRINT AREA

Please verify with your selling dealer to ensure your ATV has been regis­tered with Bombardier Inc.

72

CHANGE OF ADDRESS

If your address has changed, be sure to fill out and mail the card provided on this
page.

Such notification is likewise necessary for your own safety even after expiration
of the original warranty, since Bombardier Inc. will be in a position to contact you
if correction to your ATV becomes necessary.

NOTE: This card is strictly for change of address only.

✃

CHANGE OF ADDRESS

VEHICLE IDENTIFICATION NUMBER

OLD ADDRESS: ______________________________________________

NEW ADDRESS: ______________________________________________

STOLEN UNITS

In the event that your ATV is stolen, you should notify your area’s distributor warranty
department of such.

Please provide your name, address, phone number, vehicle identification number and
date it was stolen.

Bombardier Inc. will provide a list of stolen units to all ATV dealers on a monthly basis to
aid in recovery of such units to their owners.

❏

Model Name Vehicle Identification Number (V.I.N.)

NAME

______________________________________________

NO. STREET APT

______________________________________________

CITY STATE/PROVINCE ZIP/POSTAL CODE

______________________________________________

______________________________________________

NO. STREET APT

______________________________________________

CITY STATE/PROVINCE ZIP/POSTAL CODE

______________________________________________

COUNTRY

NAME

COUNTRY

73

✁

STAMP

яюэяьыъщшы

яюэяюьыъщшьчцхящфуэыт

ATV WARRANTY
VALCOURT, QUEBEC
CANADA J0E 2L0

CHANGE OF ADDRESS

If your address has changed, be sure to fill out and mail the card provided on this
page.

Such notification is likewise necessary for your own safety even after expiration
of the original warranty, since Bombardier Inc. will be in a position to contact you
if correction to your ATV becomes necessary.

NOTE: This card is strictly for change of address only.

✃

CHANGE OF ADDRESS

VEHICLE IDENTIFICATION NUMBER

OLD ADDRESS: ______________________________________________

NEW ADDRESS: ______________________________________________

STOLEN UNITS

In the event that your ATV is stolen, you should notify your area’s distributor warranty
department of such.

Please provide your name, address, phone number, vehicle identification number and
date it was stolen.

Bombardier Inc. will provide a list of stolen units to all ATV dealers on a monthly basis to
aid in recovery of such units to their owners.

❏

Model Name Vehicle Identification Number (V.I.N.)

NAME

______________________________________________

NO. STREET APT

______________________________________________

CITY STATE/PROVINCE ZIP/POSTAL CODE

______________________________________________

______________________________________________

NO. STREET APT

______________________________________________

CITY STATE/PROVINCE ZIP/POSTAL CODE

______________________________________________

COUNTRY

NAME

COUNTRY

✁

STAMP

яюэяьыъщшы

яюэяюьыъщшьчцхящфуэыт

ATV WARRANTY
VALCOURT, QUEBEC
CANADA J0E 2L0

WARNING

Indicates a potential hazard that could result in serious injury or death.

WARNING

THIS VEHICLE CAN BE HAZARDOUS TO OPERATE.

A collision or rollover can occur quickly, even during
routine manoeuvers such as turning and driving on hills
or over obstacles, if you fail to take proper precautions.

SEVERE INJURY OR DEATH can result if
you do not follow these instructions:

• BEFORE YOU OPERATE THIS ATV, READ THE

OPERATOR’S GUIDE

AND ALL LABELS.

• NEVER OPERATE THIS ATV, WITHOUT PROPER

INSTRUCTION. Beginners should complete a

certified training course.

• NEVER CARRY A PASSENGER. You increase
your risk of losing control if you carry a passenger.

• NEVER OPERATE THIS ATV ON A PAVED
SURFACE. You increase your risk of losing control

if you operate this ATV on pavement.

• NEVER OPERATE THIS ATV ON PUBLIC ROADS.

You can collide with another vehicle if you operate
this ATV on a public road.

• ALWAYS WEAR AN APPROVED HELMET,

eye protection, and protective clothing.

• NEVER CONSUME ALCOHOL OR DRUGS

before or while operating this vehicle.

• NEVER OPERATE THIS ATV AT EXCESSIVE
SPEEDS. You increase your risk of losing control

if you operate this ATV at speeds too fast for the
terrain, visibility conditions, or your experience.

• NEVER ATTEMP WHEELIES, JUMPS, OR OTHER

STUNTS.

, THE

SAFETY HANDBOOK