Trail Cameras – BG668 36MP Series
User Manual
BG668 36MP Series
Table of Contents
Trail Cameras – BG668 36MP Series
1. Basic
1.1 General Description
1.2 Product View
2. Camera Operations
2.1 Batteries / Power Supply
2.2 SD Card Information
2.3 SIM Card Information
2.4 Camera Modes
2.5 Manual Image / Video Capturing
2.6 Manage Images and/or Videos
...........................................................................................
..........................................................
.....................................................................
................................................................
.................................................
.......................................................
.....................................................
..................................................................
..................................
......................................
2.7 Sending Images via MMS/GPRS/Molnus
2.8 Trigger Modes
2.9 Password Setup
..................................................................
................................................................
....................
- 1 -
- 1 -
- 2 -
- 3 -
- 3 -
- 3 -
- 4 -
- 5 -
- 6 -
- 6 -
- 7 -
- 8 -
- 9 -
3. Camera Setup Settings & Display
3.1 Interface & Display Settings
3.2 Mobile Communication
3.3 Camera Setup Software
3.4 Cloud Service - Molnus
3.5 Mobile Applications
3.5.1 SMS Command List
.................................................
.................................................
..................................................
.......................................................
.................................................
......................................
..........................................
3.5.2 BG Tools Usage Instructions for Android App..- 18 -
3.6 Camera Setup Options
..................................................
4. Detection Ranges – PIR Detection Zones
5. Technical Specifications
6. Parts List
WARRANTY CARD
................................................................................
..................................................................
......................................................
........................
- 10 -
- 10 -
- 11 -
- 12 -
- 14 -
- 16 -
- 17 -
- 22 -
- 28 -
- 29 -
- 30 -
- 31 -
Trail Cameras – BG668 36MP Series
- 1 -
1. Basic
1.1 General Description
BG668, a digital scouting camera with GPS and
communications functionality, is a digital infrared surveillance
camera that can be triggered by any human or animal
movement, monitored by a highly sensitive Passive Infrared
(PIR) motion sensor. After being triggered, the camera then
automatically captures high quality pictures (up to 36M pixels)
or records video clips (4K).
Password protection makes it impossible to enter the camera
without a password, helping to protect the data.
GPS automatic positioning function,add longitude and latitude
into image properties, can also send GPS information to
mobile phone or Email, for viewing camera location.
BG668-E36WG/BG668-AU36WG
Can send pictures instantly to your mobile device or videos
(less than 20M) to your e-mail via GPRS network.
BG668-V36WG/BG668-A36WG
Can only send pictures to your e-mail via GPRS network.
- 2 -
1.2 Product View
1
Antenna
2
Infrared LED
3
Lens
4
Microphone
5
Lock
6
PIR
7
Indication LED
8
Right
9
Up/Video
10
OK/Play
11
SD Card Slot
12
Left
13
SIM Card Slot
14
Down/Photo
15
Speaker
16
Power Switch
17
Menu
18
Shot
19
LCD display
20
Battery Tray
21
DC In
22
USB Port
23
Screw Hole
Trail Cameras – BG668 36MP Series
Fig. 1: Front View Fig. 2: Inner Panel View
Fig. 3: Bottom view
- 3 -
2. Camera Operations
2.1 Batteries / Power Supply
2.1.1 Powered by Batteries
① 4 or 8 AA batteries
High-density, high-performance rechargeable or
non-rechargeable Alkaline batteries are recommended.
You can also use NiMH batteries as well, each battery
should be above 1.5V.
5
②
Need to use Pointed Head 18650 Battery.
18650 batteries
X
Trail Cameras – BG668 36MP Series
2.1.2 Power Supply
A DC 6-Volt, 2 A external power supply adapter can also
be used to power the camera (not included).
2.2 SD Card Information
To take full advantage of the latest technologies, we
recommend Class 10 SD cards or better, which have
fast transfer speeds and long durability for extensive
shooting in the most extreme outdoor conditions. Some
SD cards are deemed Secure Digital High Capacity
(SDHC) PRO cards, which work with SDHC compatible
devices only. Please check that your product is
compatible with SDHC cards.
Insert the SD card into the camera before
turning on the camera
This camera supports up to a 32GB capacity SD card,
and has no built-in internal memory. The camera will
not function without the SD card properly inserted into
the camera.
- 4 -
Make sure the SD card is unlocked before
inserting it into the camera
If you experience any problems with an
inserted SD card
Try reformatting the SD card, utilizing the camera’s
main settings option.
2.3 SIM Card Information
Insert the SIM card into the camera before
Trail Cameras – BG668 36MP Series
turning on the camera
The camera SIM card slot is sized for a standard SIM
card. If you have a nano or micro size SIM card,
utilizing a SIM card adapter (included with most of our
cameras) will be required to connect your camera to the
cellular network via SIM card.
Supported 4G communication band
BG668-E36WG
FDD LTE: B1/B3/B5/B7/B8/B20
TDD LTE: B38/B40/B41
WCDMA: B1/B5/B8
GSM: 900/1800
BG668-AU36WG
LTE FDD: B1/B3/B4/B5/B7/B8/B28
LTE TDD: B40
WCDMA: B1/B2/B5/B8
GSM: B2/B3/B5/B8
Trail Cameras – BG668 36MP Series
- 5 -
BG668-A36WG
LTE FDD: B2/B4/B12
WCDMA: B2/B4/B5
BG668-V36WG
LTE FDD: B4/B13
Note: The camera will still function without a
SIM card. The SIM card is needed only for the
wireless/cellular messaging capabilities.
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the camera.
The power switch is located inside the camera on the
bottom right of the LCD screen.
The different camera modes are as follows:
OFF Mode
Turns the camera off. The camera will still consume a
small amount of power while in “OFF” mode. It is
recommended to remove the batteries if the camera
will not be used for a long period of time.
TEST/SETUP Mode
In this mode, the camera allows you to customize the
camera settings or play back pictures and videos the
camera has taken on the LCD display.
In this mode, the camera will automatically shut
down after a few minutes of no operation.
ON Mode [ Hunting Mode ]
Trail Cameras – BG668 36MP Series
- 6 -
The camera will take pictures or record video when
motion is detected and/or at specific time intervals,
according to the programmed settings. After
switching the camera to the ON position, the red LED
motion indicator will blink for about 1 minute and
then turn off. This preset time allows you to adjust
the camera’s position if needed, before the camera
becomes active.
2.5 Manual Image / Video Capturing
Place the camera in TEST/SETUP mode and press the
“SHOT” button on the right of the control pad to
manually capture photos or record video.
Press “SHOT” again to stop capturing video.
2.6 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press the
“OK/Play” button to view images or videos. The latest
image or video will be shown on the LCD screen.
To view:
Press ▲ or ▼ to view the next or previous image or
video.Press “SHOT” to start a video.
To delete:
Press OK in Test/Setup Mode to enter into Playback
mode and access the pictures and videos. Press the ▲
or ▼ to toggle between photos to find the photo(s) to
delete. Once selected, press the “MENU” button and
the options Del One and Del All appear. Press OK
Trail Cameras – BG668 36MP Series
- 7 -
when the Del One option is selected. Press OK again
to confirm you want to delete the picture or video
selected.
2.7 Sending Images via MMS/GPRS/Molnus
Images can be sent directly to your wireless device or
email, based on the Send Mode settings. Email and
wireless device information must be set up while the
camera is in TEST/SETUP mode. Images can be sent via
MMS/GPRS/Molnus when a correctly set up SIM card is
recognized, installed and the wireless signal strength is
adequate.
You have the options of Molnus,email MMS, email
GPRS, or phone MMS. To choose an option, enter the
TEST/SETUP mode, click the menu button and scroll
right until you reach the internet tab of the camera
settings. Videos will be sent in less than 20MP. （ The
BG668-V36WG/BG668-A36WG will only have option:
Molnus,email GPRS）
To manually send a photo:
Put the camera in TEST/SETUP mode
Wait for the camera to acquire a network signal and
the SIM card to be recognized
indicates the SIM card is recognized by the camera.
indicates the SIM card is not recognized by the
camera or the SIM card is not working due to
connection/activation issues.
Take a manual photo by pressing the “SHOT” button
or press OK to view the photos stored on the camera
Trail Cameras – BG668 36MP Series
- 8 -
Find the picture you want to manually send
Press the MENU button to pull up the Send To:
option that is currently set in the camera settings
Press OK again to send the picture via the
messaging option chosen in your camera settings
The Send Mode settings will dictate what time you want
pictures sent to you. When in the ON mode, the options
“Daily Report” and “Instant” will be active, allowing you
to receive a daily report of all your photos taken or instant
messaging of your photos being taken (based on you
settings).
2.8 Trigger Modes
There are 3 different trigger modes for the camera: PIR
Trigger/Sensitivity, Time Lapse, and a combined
PIR/Time Lapse mode. These modes are activated by
three different menu options (PIR Trigger/Sensitivity,
PIR Interval, and Time Lapse).
PIR Trigger/Sensitivity
In this trigger mode, the camera will activate when
motion is detected. If the PIR Trigger/Sensitivity option is
set to OFF, the camera will not respond to any motion
within the camera’s trigger detection range.
Time Lapse
In this camera mode, the camera will activate at the set
time interval regardless of motion detection. If the Time
Lapse option is set to OFF, this trigger function will be
disabled.
Combined PIR/Time Lapse
Trail Cameras – BG668 36MP Series
- 9 -
For the combination of both PIR and Time Lapse
triggering, the following settings must be set correctly:
PIR Trigger/Sensitivity must NOT be set to OFF
The Time Lapse interval must be set to a non-zero
value.
The camera will capture pictures or video when motion is
detected and at the preset time(s), regardless of motion
detection.
● If PIR Trigger/Sensitivity and Time Lapse options are
BOTH OFF, the camera will not capture any photos or videos.
Additional PIR settings to note:
PIR Interval
This setting indicates how long the PIR sensor will be
disabled after each camera triggering. During this
interval time, the camera will not react to any
detected motion or activate at the scheduled Time
Lapse interval.
2.9 Password Setup
Encryption settings, you need to enter your pre-set
password to enter the camera, can play a role in
protecting privacy，composed of four digits.
2.9.1 Press ▲/▼ to toggle between the number from 0~9,
Press /► to choose a certain password position.
2.9.2 Your password must be entered twice to be taken
into effect.
2.9.3 After your password has been successfully set up,
you will need to enter this code to access your camera
before each boot.
Trail Cameras – BG668 36MP Series
- 10 -
China- Unicom-4G
SD card icon
Available space
Battery level
Number of image
36M
Note: Password Set is off by default, you can open
it if you want to use. If you forgot your password,
please contact us for help.
3. Camera Setup Settings & Display
3.1 Interface & Display Settings
To update the camera settings, place the power switch to
the TEST/SETUP position.
To navigate the menus, utilize the following built-in
buttons:
MENU: Enter the program menu in Preview Mode
Delete or Send an image/video in Playback
▼►: Move between menu options (OK to select)
OK / PLAY: Save parameter settings and play videos
SHOT: Capture a photo or record a video manually
When the camera is in TEST/SETUP mode, the screen
will activate and display the following:
indicates the SIM card is recognized by the camera.
indicates the SIM card is not recognized by the
Trail Cameras – BG668 36MP Series
- 11 -
camera or the SIM card is not working due to
connection/activation issues.
3.2 Mobile Communication
The camera can receive and respond to commands sent
via Molnus,SMS, MMS, GRPS to the Apple or Android
application as long as the camera is correctly connected
to a wireless carrier.
To enable the SMS functionality using the mobile
application, you must complete the following steps:
Place the camera in Test/Setup Mode and go into
the Menu Setup options
Set SMS control to ON in the second tab from the
right in the camera menu.
For MMS and GPRS functionality, the following Menu
Setup options will need to be set:
MMS network settings (varies depending on carrier)
（not available for BG668-V36WG/A36WG）
GPRS network settings (varies depending on
carrier)
Molnus settings (varies depending on carrier)
Send to Phone option
BG668-E36WG/BG668-AU36WG:Molnus,MMS or
GPRS
BG668-V36WG/BG668-A36WG:Molnus,GPRS
*The MMS functionality is not available for
BG668-V36WG/BG668-A36WG.
The settings for the network options vary between service
providers. You will need to contact your SIM service
provider for specifics on these settings.
Trail Cameras – BG668 36MP Series
- 12 -
3.3 Camera Setup Software
For assistance with the camera setup, download the camera
setup application (BMC_config.zip), along with the basic
instructions both found from our website
www.bolymedia.com/index/Support.
Open the software and your select camera model:
STEP 1: Select your country and carrier.
STEP 2: Check WAP/Internet Parameters:
Fill out the required fields (marked with an asterisk).
Input Email server such as “smtp.gmail.com” or
“smtp.bolymedia.com.”
NOTE: If your email uses encryption techniques, please
select the corresponding protocol. (e.g. when using Gmail
select SSL to ensure the email is sent successfully).
Trail Cameras – BG668 36MP Series
- 13 -
Step 3
Step 2
Step 1
Step 3
Step 5
Trail Cameras – BG668 36MP Series
- 14 -
STEP 3: Choose between default or manual settings. For
first time users, we suggest using the default settings.
STEP 4: Input your phone’s number to receive/send the
remote commands and images in the “administrator
number” field, followed by your email address in the
“Receive Email 1” field (This is NOT the phone number of
the inserted SIM card that resides in the camera).
STEP 5: Save the .bin file in the GSM folder of the SD card
after all settings are complete. The program names the .bin
file. The .bin file must be loaded into the specific camera’s
GSM folder.
If your country or SIM card provider is not listed, select
“Others”. You will need to ask the SIM card provider for
their specific MMS URL, MMS APN, Port, MMS IP, Account,
Password, GPRS APN, GPRS account, and GPRS password.
For sending emails, your email service provider will be able
to provide the send email server and port settings.
Note: Once the SD card is inserted in the camera and the
camera is turned on, this file will automatically upload to
the camera and delete from the SD card.
3.4 Cloud Service - Molnus
Molnus is a cloud service that allows you as a user of a
compatible camera to transfer and store images taken
through the cameras and making it accessible on compatible
devices and computers.
To get started, you need to supply the camera with batteries
and a SIM-card that has internet access.
You also need to have the phone number and the APN name
to the SIM-card you will use for the camera.
Trail Cameras – BG668 36MP Series
- 15 -
The APN name is provided by the operator of the SIM
card. Each operator has their own APN name. If not present
in any documents that was sent along with the SIM-card,
then please check the operator s homepage for APN
settings.
IMEI,Control Code can find on your camera,need a
SIM-card that has internet access,then start the camera in
SETUP mode, and when it shows the operators name in
camera display, it s time to check Version.
Step1 Register your Molnus account.(In Molnus)
Step2 Login to your Molnus account and go to the My
Cameras page.(In Molnus)
Step3 Slide the functions switch to SETUP position on
your camera,and make sure Send mode is “Molnus”.(On
camera
Step4 Press the Register camera button to register
your camera.(In Molnus)
Trail Cameras – BG668 36MP Series
- 16 -
Step5 Slide the functions switch to ON position on your
camera, and quickly place the device with the camera facing
an area with no movement, for example against an wall.(On
camera)
Step6 Press the Register button In Molnus, and wait for
about 5 minutes.(In Molnus)
The registration should now be done, and camera should
now be able to upload images to Molnus.
Test the function by making some moment in front of
camera. Within some short time, the images will show up in
Gallery In Molnus.
If you would like to use Molnus on your smartphone, then
please download the Molnus app on Google Play or Apple's
App Store.
For more details please refer to the Molnus website:
https://www.molnus.com/
3.5 Mobile Applications
When the camera is switched to the ON mode, you can
change some of the basic camera settings through the
mobile application. There are currently apps supported by
Android and Apple devices. Charges or fees may apply
when sending text messages to the camera depending on
your cellular provider.
For Android, you can search
Google store, or download the application directly
from our website under the Downloads section:
http://www.bolymedia.com/index/Support
BGTools
from the
- 17 -
For Apple, search BGTools in the official Apple App
No.
Function
SMS Command
1
Set MMS
Parameters
#m#http://mmsc.cingular.com#6
6.209.11.32#8080#wap.cingular#
account#password#
(The example parameters are for if
your carrier is AT&T)
2
Set GPRS
Parameters
#s#bmctest123@163.com#bmc123
#25#cmnet#smtp.163.com#accou
nt#password#
(The example parameters are for if
your email host is 163)
3
Set Receive
Email Address
#r#bmc1@sina.com#bmc2@sina.c
om#bmc3@bmc3@sina.com#
4
Get On Spot
Photo
#t# (Send MMS to phone)
#t#e# (Send picture to Email by
GPRS)
5
Check Camera
Settings
#L#
6
Edit Work
Parameters
#e#cp#s5#fh#b1#v60#t#l10m#pn
#i5s#Hon08:30-20:30
(cp: camera mode, s5:photo size,
fh: video size, b1:photo burst, V60:
video length, t: set clock, l10m:
time lapse, pn: pir trigger, i5s: PIR
interval, mp: send to, Hon: work
hour)
7
Format SD Card
#F#
8
Help
#H#
store.
3.5.1 SMS Command List
Trail Cameras – BG668 36MP Series
Trail Cameras – BG668 36MP Series
- 18 -
BG668-E36WG
BG668-E36WG
3.5.2 BG Tools Usage Instructions for Android App
The Android APP makes it easy to communicate with the
camera, so you don’t need to edit the SMS.
STEP 1: Open the BG Tools app and click on the icon to
add a new device.
STEP 2: ①Input the model of your camera ②Input your
SIM card number, which is inserted in your
camera ③Select your camera model number,
then click “Add” to finalize.
STEP 1 STEP 2
Trail Cameras – BG668 36MP Series
- 19 -
STEP 3: Click “send”, then choose the country and
provider that corresponds with your SIM card (that you
inserted into the camera). Afterwards, Click “Check
WAP/Internet Parameters” to check whether you have all the
required parameters filled in. The “User name and User
Password” is your MMS name and password.
STEP 3 STEP 4
STEP 4: In the Select Mail Server, you can decide on
having Boly Email or Other Email service.
Select “my device” to add or delete a device.
- 20 -
STEP 5: Select “Setting” to set users parameters or set to
default.
STEP 6: Select “Get Photos” to get a photo from your
STEP 7: For more settings, select “Advanced” to change
Trail Cameras – BG668 36MP Series
camera device.
Images can be sent two ways:
Cellphone: Sends MMS to phone (not available
for BG668-V36WG/BG668-A36WG)
Email : Sends to email by GPRS.
password, set up your Super User Information,
System Checking, Formatting the SD card,
Arming, or Disarming.
STEP 5 STEP 6 STEP 7
Trail Cameras – BG668 36MP Series
- 21 -
Set password:
If you forget your Super User password, you can get a new one.
Super User information:
Change your Super User and password in the advanced
settings section.
Add or Delete a device:
Android:
Select“My Device”to add a device.
Holding down the “My Device” button gives you the option to
delete operations."
IOS:
In order to add a device, click“ ”to delete a device, slide the
device to left.
Android IOS
Trail Cameras – BG668 36MP Series
- 22 -
Menu Options
Descriptions
Basic Settings
Camera Mode
Choose between capturing images, videos or
both at the same time: Photo, Video, Pic+Video
Default: Photo
Photo Size
Choose the image size: 14MP, 25MP or 36MP
(mega pixel) options are available.
Default: 36MP
Video Size
Choose the video size:
3840*2160,2560*1440,1920*1080, 1280*720,
640*480
Default: 3840*2160
Photo Burst
Choose the number of photos taken after the
camera is triggered: 1 Photo, 2 Photos, or 3
Photos. If Pic+Video is selected, Photo burst
defaults to 1 photo, regardless of entered value.
Default: 1 Photo
Video Length
Choose the duration of the video recording: Valid
values extend from 5 to 180 seconds with a one
second delay. Press the
► or
keys to decrease
3.6 Camera Setup Options
To view the camera settings menu, slide the power switch to
TEST/SETUP mode . Use the ► or keys to toggle between
the sub-menus. Use the ▲ or ▼ keys to select the different
options. Press “OK” to save the settings.
After changing EACH setting in the Setup menu, you
must press OK or the camera will retain the previous
setting.
Depending on the model and firmware version, not all Menu
options may be available on your specific camera. The menu
options with * are not available for BG668-V36WG.
Trail Cameras – BG668 36MP Series
- 23 -
or increase the video length.
Default: 10 seconds
Clock Settings
Set Clock
Set the cameras date and time. The date format
is month/day/year. The time format is hour:
minute: second.
Time Lapse
The camera can capture images or videos at a
preset time interval regardless of motion
detection. Changing this setting to a non-zero
value turns on Time Lapse mode and the camera
will take photos at the set interval time – Values
range from 5 minutes to a maximum of 8 hours.
If PIR Trigger/Sensitivity and Time Lapse
options are BOTH OFF, the camera will not
capture any photos or videos.
Default: OFF
PIR Trigger/
Sensitivity
This setting is for the sensitivity of the PIR
sensor. There are four sensitivity parameters:
High, Normal, Low and Off. It is recommended
to use HIGH sensitivity in areas with little
environmental interference or warmer, humid
temperatures or climates. Use LOW sensitivity
for areas that have a lot of interference. The
sensitivity of the PIR is affected by temperature.
Higher temperatures lead to lower sensitivity.
If PIR Trigger/Sensitivity and Time Lapse
options are BOTH OFF, the camera will not
capture any photos or videos.
Default: Normal
PIR Interval
This setting indicates how long the PIR sensor
will be disabled after each camera triggering.
During this time the PIR sensor will not react to
any detected motion or scheduled timer
functions. The PIR Interval can be set between
zero seconds to a maximum of 1 hour. Press
LEFT or RIGHT to decrease or increase the
desired PIR Interval time.
Default: 5 seconds
Work Day
Choose the days of the week you want the
Trail Cameras – BG668 36MP Series
- 24 -
camera to work.
This setting is only available in Hunting Mode.
Default: All
Work Hour
This setting allows the camera to be active only
during the set period of time per day. If
activated, the camera will NOT take pictures or
video outside of the specified working hour,
regardless of any other setup option settings. The
values are set to military time that range from
00:00 to 23:59.
Default: OFF
Send settings
Send To
Sending images to your phone/email/Molnus.
* Phone [MMS]: Send the image to cellular
device via WAP.
(not available for BG668-V36WG/A36WG)
* Email [MMS]: Send the image to email
address via WAP.
(not available for BG668-V36WG/A36WG)
Email [GPRS]: Send the image to email
address via SMTP.
Molnus:Send the image to Molnus via
WAP.
Default: Molnus
*
Phone MMS
(not available for
BG668-V36WG/A3
6WG)
The camera sends images to mobile phone.
Required MMS settings: URL, APN, IP, Port,
Account, and Password. Contact your cellular or
network service provider if you are not familiar
with the settings.
“Phone1-Phone4” represents the receiving
phone number.
*Email MMS
(not available for
BG668-V36WG/A3
6WG)
The camera sends images to email address via
WAP. Required MMS settings: URL, APN,
Account, Password, IP and Port. Contact your
cellular service provider if you are not familiar
with these settings.
“Email1-Email4” represents the receiving
Email address.You can add up to 4 email
Trail Cameras – BG668 36MP Series
- 25 -
accounts.
Email GPRS
The camera sends image to your email address
via GPRS network with SMTP protocol. Required
GPRS settings: APN, Account Password, Server,
Port, SSL. Contact your cellular or network
service provider if you are not familiar with the
settings.
“Email User and Email password”
represents sending your email user and
password.
“Email1-Email4” represents the receiving
Email address.
Molnus
The camera sends image to email address via
GPRS.Required settings:APN, Molnus Account/
Password,SIM IMEI & Control Code.
The APN name is provided by the operator of the
SIM card.Molnus Account/ Password:Register in
the web by yourself.SIM IMEI & Control
Code:check the camera Version Enter,need to
insert the SIM card and get the network.
Send Mode
There are 3 options for this setting:
Instant:
Only works in ON mode. The camera
will send a message instantly after it captures a
photo or video.
Daily : Only works in ON mode.
Photo Mode: This setting will send
summarized information and the last picture
taken at the end of setup.
Video Mode: The summarized information
will include how many videos were taken and
the last video taken at the end of setup (less
than 10M).
Pic+Video Mode: The summarized
information will include how many videos and
pictures were taken and the last picture taken at
the end of setup.
● OFF: Disables all communication functions.
Please Note: Some cellular carriers limit the size
of files being sent. Some image and video files
Trail Cameras – BG668 36MP Series
- 26 -
may be too large to send.
Default: Instant
SMS Control
SMS Control enables mobile communication
functionality. When SMS Control is ON, the camera
can receive and respond to your SMS commands.
Default: On
Attachment Size
Setting the picture size sent to your phone or
email.
There are 3 options for this setting:
Low: Sends severely compressed picture.
Normal: Sends slightly compressed picture.
*High: Sends the original pictures. (not available
for BG668-V36WG/A36WG)
Default: Low
GPS
Automatic positioning function,add longitude
and latitude into image properties, can also send
GPS information to mobile phone or Email, for
viewing camera location.
Default: OFF
Others
Language
Choose the language you prefer. Language
options include: English, Suomi, Deutsch,
Svenska, Dansk, Norsk, Czech, Russian, Italian
and French.
Default: English
Beep Sound
Enable or disable the sound the camera will
make while navigating the menu settings.
Default: On
Camera
Position
Used for multiple cameras in an area. You can
set an A-Z indicator for each of your cameras in
order to distinguish between which photos are
from specific camera.
Default: OFF
Recycle Storage
In hunting mode, when the SD card is full, the
first images or videos will be covered by new
getting pictures or videos. So that you don't need
to retrieve your memory card manually. But in
SETUP mode, SD can’t recycle storage.
Default: OFF
Trail Cameras – BG668 36MP Series
- 27 -
Format SD
All information on the SD card will be deleted.
Make sure you made a backup of important data
on the SD card.
Default Settings
Restore all settings back to the default values.
Version
Shows firmware and IMEI (International Mobile
Equipment Identity) information of the camera.
Password Set
Power-on password, set up after you need to
enter your pre-set password to enter the camera,
composed of four digits.
Default: OFF
Trail Cameras – BG668 36MP Series
- 28 -
4. Detection Ranges – PIR Detection Zones
This picture shows Bolymedia’s 5 types of detection ranges at
various detection angles. This camera has a super long
detection range with a 60 degree FOV angle.
The PIR detection angle (α) is smaller than the field of view
(FOV) angle (β). The advantage of this design is to reduce
empty picture rate and capture most, if not all, motions.
This camera has a new, patented design of the PIR. The new
patented PIR’s detection range can reach to 100ft (in good
environments). The previous picture shows the compared
detection zone between normal PIR and the new patented PIR.
Trail Cameras – BG668 36MP Series
- 29 -
Picture Resolution
14/25/36MP
Video Resolution
3840*2160,2560*1440,1920*1080,
1280*720,640*480
Video Length
5 to 180 Sec
Detection Range
100ft.
Illumination Distance
100ft.
LED Type
940nm
LED Number
50pcs
Image Sensor
14MP Color CMOS
Aperture
ƒ/ 2.4
Field of View
110°
Memory Card
32GB Max
Display Screen
Built-In 2" LCD
Sound Recording
Yes
Operating Ambient
Temperature
-20℃ ~ + 60 ℃
Relative Humidity
5% to 90% Noncondensing
Dimensions
145.1*103.8*82mm
Unit Weight
0.40Kg
Power Supply
4 or 8 AA Batteries
5 Pointed Head 18650 Batteries
6V,2A External Power Supply
Standby Power
Consumption
<0.3mA(<7mAh/Day)
Compliances
FCC, CE, RoHS
5. Technical Specifications
- 30 -
6. Parts List
Part Name
Quantity
Digital Camera
One
USB Cable
One
Mounting Bracket
One
Belt
One
User’s Manual
One
Antenna
One
Trail Cameras – BG668 36MP Series
Version 1.1
- 31 -
WARRANTY CARD
Customer Name:
Contact Address:
Date of Purchase:
Contact Tel:
Model No.:
Series No.:
Trail Cameras – BG668 36MP Series
Retailer:
The camera manufacturer provides 12 months warranty
for this product against manufacturing defects or malfunctions.
If your camera fails to function under normal use within 1 year,
the camera manufacturer will repair or replace the camera for
free of charge. Improper use of the camera resulting in damage
is not covered by this warranty. The camera manufacturer can
provide extra service for your camera after the warranty
expiration, but the customer have to be responsible for extra
charges on parts, labor and shipping costs therefore brought.
Please contact your reseller for warranty service
Loading...