Bolt VB-UMK User manual

Thank you for choosing Bolt

One-year limited warranty

Congratulations on the purchase of your Bolt Umbrella Mounting Kit for the VB-Series Bare-Bulb Flashes. The included
wide angle reector and umbrella bracket enable you to project full and even lighting onto an umbrella, providing
ideal direction, quantity, and quality of light. To install the umbrella mounting kit, please follow these steps:

Install the bracket into the VB-Series
Bare-Bulb Flash’s umbrella bracket
mounting hole, and tighten the knob
securely.

Slide the wide-angle reector over
the bulb and into the accessory
mount, aligning the hole with the
umbrella mounting bracket. Tighten
the accessory mount knob to secure

Slide the umbrella shaft through the
hole in the reector and into the
umbrella mount. Use the thumb
screw to tighten the umbrella into
place.

the reector.

NOTE: The umbrella bracket supports umbrellas up to 45 inches and shafts up to 8 mm.

GG1

Made in China www.boltashes.com

VB-UMK Umbrella Mounting Kit Manual