Page 1
SPIDER
SPoRty looK
The only model available in the red flash SPIDER provides protection
for outdoor activities.
SPIPSI
26 g
SUPPLIED WITH
Microfibre pouch
ETUIFS
NON-SLIP BRIDGE
LOWER P ROTECTION
NON-SLIP TIPGRIP TEMPLES
SPIESP
SPIFLASH
Page 2
SPIDER
SPoRty looK
MODEL VERSIONS REFERENCES LENS MARKING FRAME MARKING COATI NGS
SPIPSI
SPIESP
SPIFLASH
SPIDER
Clear Anti-scratch(K)/anti-fog(N)
ESP Anti-scratch(K)/anti-fog
Red flash Anti-scratch(K)/anti-fog
LENS MARKING
Optical class symbols:
1. Continuous work
Mechanical strength symbols:
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
T. The letter T, immediately after the mechanical strength symbol,
authorises use for high speed particles at extreme temperatures.
Others symbols:
K. Resistance to surface damage by ne particles (optional)
N. Resistance to fogging (optional)
European standard Manufacturer name
TECHNOLOGY
ESP, Extra Sensory Perception.
An innovative coating to reduce dazzle
and the harmful affects of blue light.
B-ESP filters 57% of blue light, transmits
64% of visible light, 99.99% of UVA/UVB.
2C-1,2
5-1,4
5-3,1
1 FT KN EN166 FT
1 FT K EN166 FT
1 FT K EN166 FT
FRAME MARKING
EN 166: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
T. The letter T, immediately after the mechanical strength symbol, authorises
use for high speed particles at extreme temperatures.
European standard Manufacturer name
Bollé Safety product approval certificates to CE standards will be
sent on request.
CLEANING AND STORAGE
CLEANING: The lenses should be cleaned regularly with a mild soap detergent or optical
solution.
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.
STORAGE: Store between 5 and 40 °, humidity <90%.
PACKAGING AND EAN13 CODE
Individual plastic
bag
10 safety spectacles
per inner box
300 safety
spectacles per
outer pack
Europe Bollé Safety
95 rue Louis Guérin
69100 Villeurbanne - France
Tél. : 00 33 (0) 4 78 85 23 64
Fax : 00 33 (0) 4 78 85 28 56
[email protected]
bolle-safety.com
3660740003210 3660740003227 3660740003234
3660740103217 3660740103224 3660740103231
3660740203214 3660740203221 3660740203238
SPIPSI SPIESP SPIFLASH
U.K. Bollé Safety
Unit C83 - Barwell Business Park Leatherhead Road - Chessington
Surrey - KT9 2NY
Tél. : 00 44 (0)208 391 4700
Fax : 00 44 (0)208 391 4733
e-mail : [email protected]
lEnSES
FRamE
tEmPlES
StRaP
Foam
SPa RE lEnSES
C CHARACTERISTICS
C
PC - 2,2 mm - Curve 8
PC
Nylon + TPE
Non applicable
Non applicable
No
01/10/2013
Loading...