Page 1
SLAM
uLtRA-tRendy
Stylish and easy-to-wear. The SLAM model provides protection at all times
while offering unbeatable comfort.
SLAPSI
SLAPSF
SLAPSJ
23 g
SUPPLIED WITH
Adjustable cord
CORDC
WRAP-AROUND FIT
ALL-ROUND VISION
SLAESP
SLAWPCC2
SLAWPCC3
SLAWPCC5
COMFORTABLE STRAIGHT TEMPLES
Page 2
SLAM
uLtRA-tRendy
MODEL VERSIONS REFERENCES LENS MARKING FRAME MARKING COATI NGS
SLAM
Clear Anti-scratch/anti-fog
Smoke Anti-scratch/anti-fog
Yellow Anti-scratch/anti-fog
ESP Anti-scratch
Welding shade 1,7 Anti-scratch
Welding shade 3 Anti-scratch
Welding shade 5 Anti-scratch
SLAPSI
SLAPSF
SLAPSJ
SLAESP
SLAWPCC2
SLAWPCC3
SLAWPCC5
LENS MARKING
Optical class symbols:
1. Continuous work
Mechanical strength symbols:
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
T. The letter T, immediately after the mechanical strength symbol,
authorises use for high speed particles at extreme temperatures.
Others symbols:
European standard Manufacturer name
TECHNOLOGY
ESP, Extra Sensory Perception.
An innovative coating to reduce dazzle
and the harmful affects of blue light.
B-ESP filters 57% of blue light, transmits
64% of visible light, 99.99% of UVA/UVB.
2C-1,2
5-3,1
2C-1,2
5-1,4
1,7
1 FT EN166 FT
1 FT EN166 FT
1 FT EN166 FT
1 FT EN166 FT
1 FT EN166 FT
1 FT EN166 FT
3
1 FT EN166 FT
5
FRAME MARKING
EN 166: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
T. The letter T, immediately after the mechanical strength symbol, authorises
use for high speed particles at extreme temperatures.
European standard Manufacturer name
Bollé Safety product approval certificates to CE standards will be
sent on request.
CLEANING AND STORAGE
CLEANING: The lenses should be cleaned regularly. Bollé Safety recommends only using
the B-clean lens cleaning system.
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.
STORAGE: All products must be stored in a dry and clean environment.
SLAPSI SLAPSF SLAPSJ SLAESP SLAWPCC2 SLAWPCC3 SLAWPCC5
Individual plastic
bag
10 safety spectacles
per inner box
200 safety
spectacles per
outer pack
Europe Bollé Safety
95 rue Louis Guérin
69100 Villeurbanne - France
Tél. : 00 33 (0) 4 78 85 23 64
Fax : 00 33 (0) 4 78 85 28 56
[email protected]
bolle-safety.com
3660740001087 3660740001094 3660740001100 3660740001117 3660740001124 3660740001131 3660740001148
3660740101084 3660740101091 3660740101107 3660740101114 3660740101121 3660740101138 3660740101145
3660740201081 3660740201098 3660740201104 3660740201111 3660740201128 3660740201135 3660740201142
PACKAGING AND EAN13 CODE
U.K. Bollé Safety
Unit C83 - Barwell Business Park Leatherhead Road - Chessington
Surrey - KT9 2NY
Tél. : 00 44 (0)208 391 4700
Fax : 00 44 (0)208 391 4733
e-mail : [email protected]
LenSeS
FRAMe
teMpLeS
StRAp
FoAM
SpARe LenSeS
CHARACTERISTICS
C
PC - 2,3 mm - Curve 11
PC
PC
Non applicable
Non applicable
No
01/10/2013
Loading...