Page 1
SILIUM
PURIty
Combining the high-tech nature of metal with subtle design.
SILPSF
34 g
«METAL» FRAME
160% F LEX TEMPLES
SILPSI
ANTI-STATIC
NON-SLIP TIPGRIP TEMPLES
ADJUSTABLE NON-SLIP PADS
Page 2
SILIUM
PURIty
MODEL VERSIONS REFERENCES LENS MARKING FRAME MARKING COATINGS
SILIUM
LENS MARKING
Optical class symbols:
1. Continuous work
Mechanical strength symbols:
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
Others symbols:
European standard Manufacturer name
Clear Anti-scratch/anti-fog
Smoke Anti-scratch/anti-fog
SILPSI
SILPSF
2-1,2
5-2,5
1 F EN166 F
1 F EN166 F
FRAME MARKING
EN 166: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Maximum protection for glasses.
European standard Manufacturer name
Bollé Safety product approval certificates to CE standards will be
sent on request.
CLEANING AND STORAGE
CLEANING: The lenses should be cleaned regularly with a mild soap detergent or optical
solution.
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.
STORAGE: Store between 5 and 40 °, humidity <90%.
PACKAGING AND EAN13 CODE
Individual plastic
bag
10 safety spectacles
per inner box
240 safety
spectacles per
outer pack
Europe Bollé Safety
95 Rue Louis Guérin
69100 Villeurbanne - France
Tél. : 00 33 (0) 4 78 85 23 64
Fax : 00 33 (0) 4 78 85 28 56
[email protected]
bolle-safety.com
3660740002954 3660740002961
3660740102951 3660740102968
3660740202958 3660740202965
SILPSI SILPSF
U.K. Bollé Safety
Unit C83 - Barwell Business Park Leatherhead Road - Chessington
Surrey - KT9 2NY
Tél. : 00 44 (0)208 391 4700
Fax : 00 44 (0)208 391 4733
e-mail : [email protected]
LenSeS
FRaMe
teMPLeS
StRaP
FoaM
SPaRe LenSeS
CHARACTERISTICS
C
PC - 2,3 mm - Curve 7
Brass
Brass + TPR + TPE
Non applicable
Non applicable
No
01/10/2013
Loading...