Page 1
BLAST
An ouTSTAnding fieLd of viSion
Unbeatable comfort and essential modular design.
With the “Visor” accessory, the Blast model can be used as a face shield
with protection guaranteed.
BLAPSI
113 g
OPTIONAL
Optical insert
SOSBLAST
viSoR SeuL
BLAST CLeAn
BLEPSI
BLFAPSI
BLARSI
BL CLEAN
BLV
FABLARSI
WITH OR WITHOUT FOAM
(ACCORDING TO VERSIONS)
ALL-ROUND VISION
BALL-PIVOT
ADJUSTABLE STRAP
OVERFLOW CHUTE FOR LIQUIDS
FITS OVER PRESCRIPTION
GLASSES
COMPATIBLE WITH
HALF-MASK RESPIRATOR
Page 2
BLAST
An ouTSTAnding fieLd of viSion
MODEL VERSIONS REFERENCES LENS MARKING FRAME MARKING COATINGS
Ventilated Anti-scratch/Anti-fog
Sealed Anti-scratch/Anti-fog
Breathable foam Anti-scratch/Anti-fog
Ventilated Acetate Anti-fog (N)
BLAST
LENS MARKING
Optical class symbols:
1. Continuous work
Use symbols:
9. Molten metal and hot solids.
Mechanical strength symbols:
B. Medium energy impact, resists a 6 mm, 0.86 g ball at 120 m/s.
T. The letter T, immediately after the mechanical strength symbol,
authorises use for high speed particles at extreme temperatures.
F. Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s.
Others symbols:
N. Resistance to fogging (optional)
European standard Manufacturer name
Spare lens Anti-fog (N)
Ventilated Acetate Anti-fog (N)
Visor for BLAST only -
Ventilated Welding shade 5
Optical insert -
BLAPSI
BLEPSI
BLFAPSI
BLARSI
FABLARSI
BL CLEAN
BLV
BLAWPCC5
SOSBLAST - -
2-1,2
2-1,2
2-1,2
2-1,2
2-1,2
1 BT 9 EN166 3 9 BT
1 BT 9 EN166 3 4 5 9 BT
1 BT 9 EN166 3 9 BT
1 F N EN166 3 9 BT
2-1,2
1 F N
1 FT N EN166 BT
EN166 3 BT
1 B 9 EN166 3 9 B
5
FRAME MARKING
EN 166: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
3. Liquid droplets or splashes.
4. Large dust particles > 5 microns.
5. Gas and ne dust particles < 5 microns.
9. Molten metal and hot solids.
B. Medium energy impact, resists a 6 mm, 0.86 g ball at 120 m/s.
T. The letter T, immediately after the mechanical strength symbol, authorises
use for high speed particles at extreme temperatures.
European standard Manufacturer name
Bollé Safety product approval certificates to CE standards will be
sent on request.
-
Anti-scratch
Europe Bollé Safety
95 rue Louis Guérin
69100 Villeurbanne - France
Tél. : 00 33 (0) 4 78 85 23 64
Fax : 00 33 (0) 4 78 85 28 56
[email protected]
bolle-safety.com
CLEANING AND STORAGE
CLEANING: The lenses should be cleaned regularly with a mild soap detergent or optical
solution.
MAINTENANCE: Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.
STORAGE: Store between 5 and 40 °, humidity <90%.
U.K. Bollé Safety
Unit C83 - Barwell Business Park Leatherhead Road - Chessington
Surrey - KT9 2NY
Tél. : 00 44 (0)208 391 4700
Fax : 00 44 (0)208 391 4733
e-mail : [email protected]
Page 3
BLAST
An ouTSTAnding fieLd of viSion
CHARACTERISTICS
LenSeS
fRAme
TempLeS
STRAp
foAm
SpARe LenSeS
Individual plastic bag
5 safety goggles or
100 spare lenses
65 safety goggle or 600
spare lenses or 80 BLV per
outer pack
C
PC - 2,0 mm
Acetate - 1,0 mm
TPR
Non applicable
Nylon
ref. BLFAPSI - SBR
ref. FABLARSI for BLARSI
PACKAGING AND EAN 13 CODE
BLAPSI BLEPSI BLFAPSI BLARSI FABLARSI BLV BLAWPCC5 SOSBLAST
3660740003050 3660740003067 3660740003074 3660740003357 3660740003630 3660740003128 3660740000622 3660740004804
3660740103057 3660740103064 3660740103071 3660740103354 3660740103637 - 3660740100629 3660740104801
3660740203054 3660740203061 3660740203078 3660740203351 3660740203634 3660740203122 3660740200626 3660740204808
Europe Bollé Safety
95 rue Louis Guérin
69100 Villeurbanne - France
Tél. : 00 33 (0) 4 78 85 23 64
Fax : 00 33 (0) 4 78 85 28 56
[email protected]
bolle-safety.com
01/10/2013
U.K. Bollé Safety
Unit C83 - Barwell Business Park Leatherhead Road - Chessington
Surrey - KT9 2NY
Tél. : 00 44 (0)208 391 4700
Fax : 00 44 (0)208 391 4733
e-mail : [email protected]
Loading...