OPERATOR’S MANUAL
TRACTOR SNOW CAB
Model Number
190-751-OEM
IMPORTANT: READ SAFETY RULES AND INSTRUCTION CAREFULLY
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
.
PRINTED IN U.S.A.
FORM NO. 48898 (7/03)
RULES FOR SAFE OPERATION
Any power equipment can cause injury if operated improperly or if the user does not understand how to operate
the equipment. Exercise caution at all times, when using power equipment.
1. This cab provides foul weather protection only. It
does not provide protection against exhaust fumes,
collision, rollover or other accidents.
2. Read the snow cab and vehicle owner's manuals
and know how to operate your vehicle before using
the snow cab attachment.
3. Be sure there is adequate ventilation when using
the tractor and snow cab in confined areas.
Look for this symbol to point out important safety precautions. It means--Attention!!
Become alert!! Your safety is involved.
UNPACKING
Open carton. Remove parts and literature. Make
certain all parts and literature are removed before
the carton is discarded.
Lay out all parts according to the illustration below.
CARTON CONTENTS
1. Base Assembly
2. RH Adapter Bracket
3. LH Adapter Bracket
4. Tool Bracket
5. Drawbar Bracket
6. U-Tube
4. The snow cab will restrict your field of vision in
some directions. Use extra caution when operating
your tractor with the snow cab attached.
5. Watch out for low tree limbs or other overhead
obstructions that may not previously have interfered with operation of the tractor. The extra height
of the snow cab may cause these objects to
become obstacles.
6. Check the area of operation thoroughly before
using the tractor.
NTENTS
7. Upright Tubes (2)
8. Rope
9. Support Rods (3)
10. Top Tubes (2)
11. Vinyl Canopy
Parts Bag (see page 3)
1
2
3
6
7
4
5
8
9
10
11
2
SHOWN FULL SIZE
ABCD E
FG
H
JKI
NOT SHOWN FULL SIZE
LMN
REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION
A 1 Hex Bolt, 5/8” x 1-3/4”
B 2 Carriage Bolt, 5/16 x 2"
C 4 Hex Bolt, 1/4 x 1-1/2"
D 8 Hex Bolt, 5/16” x 1”
E 2 Shoulder Bolt
F 8 Lock Washer, 5/16”
G 2 Flat Washer, 5/16”
H 4 Hex Lock Nut, 1/4”
I 8 Hex Nut, 5/16”
J 1 Hex Nut, 5/8”
K 2 Jam Nut, 1/2”
L 4 Spiral Hook
M 2 Footrest Clamp
N 2 Plastic Knob
3