Features & Benets ...............................................................................................................................................................................................
Performance Data & Specications
Air Defrost ....................................................................................................................................................................................................4-5
Electric Defrost ...........................................................................................................................................................................................6-7
Hot Gas Defrost .......................................................................................................................................................................................... 8-9
Physical Data .................................................................................................................................................................................................. 10-11
Dimensional Data ................................................................................................................................................................................................12
Hot Gas Reverse Cycle Kits ........................................................................................................................................................................ 13-14
3-Pipe Hot Gas Defrost ......................................................................................................................................................................................15
Replacement Parts by InterLink™ ..................................................................................................................................................................16
Standard Nozzle Selection ...............................................................................................................................................................................
We have made a commitment to customer needs, innovation and environmental stewardship and have dedicated
ourselves to delivering energy-ecient choices. PSC and EC motors will reduce costs, improve the bottom line and
enhance equipment performance and service life.
3
17
Choose the most energy-ecient motor available for evaporators.
The EC motor is an Energy Solutions® option on new Bohn Low Prole
evaporators. Available on all new equipment or as an easy-to-install,
drop-in replacement aftermarket part from InterLink™ Commercial
Refrigeration Parts. Because they’re a drop-in replacement for existing
shaded pole and PSC motors, installation is quick and easy. It’s a high impact, quick payback solution for reducing costs and achieving green
initiatives without replacing the entire system.
EC motors by InterLink are up to 75% ecient - that’s a 51-59% increase
over shaded pole motors and a 30-35% increase over permanent-split
capacitor (PSC) motors. With all of this added eciency, you can count
on more energy savings and lower operational costs while taking a
step in the right direction toward conserving our planet’s resources.
To learn more about EC motors, visit www.interlinkparts.com/ec.
Nomenclature
ADT120AK
Model SeriesCapacityElectrical CodeDesign Revision
ADT = Air defrost
LET = Electric defrost, 6 FPI
LLE = Electric defrost, 4 FPI
HGT = Hot gas defrost
2
# x 100 = BTUHA = 115/1/60
B = 208-230/1/60
C = 208-230/3/60
M = 460/1/60
AH = 115/1/60 (PSC)
BH = 208-230/1/60 (PSC)
AE = 115/1/60 (EC)
BE = 208-230/1/60 (EC)
CE = 208-230/3/60 (EC)
Minimal height of the low profile series makes it ideal for low ceiling coolers
•
Cabinet design features front access panels on each side for easy access to electrical and refrigeration components
•
All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
•
Sweat connections to reduce potential for leaks
•
Internal panels are isolated for quiet operation
•
Liquid line solenoid wire harness is factory-installed for quick installation
•
Pre-drilled holes on the back of the unit for room thermostat
•
Coil
Internally enhanced tubing and fin design for higher efficiency
•
Coil heater slots have been enlarged for easier installation and replacement
•
Reduced heater wattages
•
Hot gas loop on bottom of coil for easier access is standard for hot gas defrost models
•
Fixed defrost termination for electric, adjustable defrost termination for hot gas
•
Drain Pan
Large diameter drain hole (3/4" ID) is located on the back of the unit
•
Extended drain pan heaters for more uniform defrost throughout the drain pan and additional heat in
•
end compartments
On 4-6 fan models, drain pan has a lanyard for easy and safe access
•
Motors
Motors plug into wiring harness for easier servicing
•
EC motors available factory-installed or as a drop-in replacement through InterLink™ Commercial Refrigeration Parts in
•
115/1/60, 208-230/1/60 and 208-230/3/60 unit voltages
PSC and PSC (Totally Enclosed) motors for 115/1/60, 208-230/1/60 and 460/1/60 unit voltages
•
PSC motors or EC motors required for 50 Hz operation
•
Options
Unit Configurations: mounted components, pre-assembled, pre-charged and Beacon II™
•
- Units available with mounted TXV and mounted TXV / solenoid valve
- Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat. Available in a master
liquid line configuration
- Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick connect fittings
- Various room thermostat variations including rear mount and front access versions
- Beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and Beacon
control board
Most models available with glycol circuiting (see glycol product brochure)
•
Units available with stainless steel housing and drain pan
•
Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options