Bogen SSM Specsheet

Driver Complement:

Low Frequency: Dual Apogee 4.5"(115mm) permanent magnet
cone-type drivers

High F

requency: One Apogee 1"(25mm) titanium dome tweeter, is

treated with Ferrofluid

®

for greater power handling capability, lower

distortion, and control of short-term impedance rise

Input Connectors:

Neutrik™NL4MP Speakon™and gas-tight barrier strips standard

Compatible Processors:

DLC24 Digital Controller

Grille:

Powder-coated, diamond-punched steel

Rigging Hardware:

Two 12-gauge steel nutplates, mounted one on either side,
recessed, nominally flush; accepts 3/8"-16 thread (10mm
nutplate optional); nutplates are backed with 12-gauge steel
internal brackets

Finish:

Textured high-strength black epoxy paint; other colors optional

Enclosure Type:

Trapezoidal, optimally-vented bass

Cabinet Construction:

Multi-ply birch with stainless steel fasteners

Compact

Loudspeaker System

Engineering Data:

Description:

Format:

Single-amped/Two-way/Electronically-coupled

Dispersion:

H: 90° x V: 100°

Frequency Response (1m on axis):

85 Hz to 25 kHz ± 3 dB

Max. SPL (@1m):

112 dB cont./118 dB peak

PTML (peak transient mechanical limit):

129 dB

Sensitivity (1W @ 1m):

88.8 dB/200 Hz to 4 kHz

Nominal Impedance:

16 ohms

Max. Power Handling:

150W cont./600W peak

Dimensions:

front: 13"(330mm) W x 5.5"(140mm) H
rear: 13"(330mm) W x 3.7"(94mm) H
depth: 5.9"(150mm)

Weight:

11 lb. (5 kg)

The SSM single-amped, two-way
electronically-coupled loudspeaker system
is extremely small and lightweight, yet
capable of high acoustical output with
exceptional linearity.

SSM

©2006 Bogen Communications, Inc. 06/12

Specifications subject to change without notice. 55-0014-01B

Polar Measurements SSM (6 dB/division, normalized)

Frequency Response SSM (with controller)

20 50 100 200

500

1K 2K 5K 10K 20K

0dB/
DIV

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

0°

30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

62.5 Hz 125 Hz 250 Hz

500 Hz 1,000 Hz 2,000 Hz

4,000 Hz 8,000 Hz 16,000 Hz

Measured in a free-field anechoic environment using a swept one-third octave input.

All polar measurements obtained in a free-

field environment at 10° increments.

Dimensional Drawings SSM (dimensions in inches and millimeters)

Processor Notes:

The DLC24 Digital Loudspeaker Controller is a digital engine with an analog
surface. It combines the most advanced technology available with intuitive
interfaces to provide the key elements that ensure optimal loudspeaker
system performance and management in a variety of live sound and fixed
installation applications.

The controller provides factory-set equalization curves to smooth the
response, protective limiting, and active crossovers (for bi-amplified models
and subwoofers).

10 dB/division

Hz (Frequency)

50 Spring Street, Ramsey, NJ 07446, USA
Tel: [phone]• Fax: [phone] • www.apogee-sound.com