Bogen SPS2410, SPS2425 Service Manual
Installation
1. Place the holster against the wall and, using the screws provided, attach the
power supply holster to the wall.
2. Insert the power supply into the holster.
3. Connect the plug-in DC cable and wire tie it to the holster.
4. Connect the AC line cord and wire tie it to the side of the holster opposite the
DC cable.
24V Power Supplies
Models SPS2410, SPS2425
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-2116-01A 0407
The SPS2410 and SPS2425 are warranted to be free from defects in material or workmanship for
two (2) years from the date of sale to the original purchaser.Any part of the product covered by
this warranty that, with normal installation and use, becomes defective will be repaired or replaced
by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory
Service Department, 50 Spring Street,Ramsey, NJ 07446,USA.The product will be returned to you
freight prepaid.This warranty does not extend to any of our products that have been subjected to
abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or
repaired or altered in any manner whatsoever, or where the serial number or date code has been
removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE
WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN
MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE
MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen's liability arising out of the manufac-
ture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. In no event shall Bogen be liable
for special, incidental or consequential damages (including, but not limited to, loss of profits, loss of
data or loss of use damages) arising out of the manufacture, sale or supplying of products, even if
Bogen has been advised of the possibility of such damages or losses. Some States do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.This warranty gives you specific legal rights,and you may also have other rights
which vary from State to State.
Products that are out of warranty will also be repaired by the Bogen Factory Service Department
-- same address as above or call 201-934-8500. The parts and labor involved in these repairs are
warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping
charges in addition to parts and labor charges will be at the owner's expense.All returns require a
Return Authorization number.
Limited Warranty
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com
Loading...