S86T725PG8W & Variations The loudspeaker assembly shall be a Bogen model S86T725PG8W (or
S86T725PG8WVR, S86T725PG8WVK, S86T725PG8WBR, S86T725PG8WBRVR, or
S86T725PG8WBRVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50
Hz to 12 kHz. Axial sensitivity shall be 95 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 6 oz.
ceramic magnet and a 3/4" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or
70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The loudspeaker shall
be assembled on a 13" steel ceiling grille, finished in off-white semi-gloss enamel. Assembly depth shall be 3-1/4".
(For S86T725PG8WVR add) A recessed volume control shall be included.
(For S86T725PG8WVK add) A volume control knob shall be accessible from the front of the grille.
(For S86T725PG8WBR add) A terminal strip shall be included for connection of the audio line.
(For S86T725PG8WBRVR add) A terminal strip shall be included for connection of the audio line.
A recessed volume control shall be included.
(For S86T725PG8WBRVK add) A terminal strip shall be included for connection of the audio line. A vol-
ume control knob shall be accessible from the front of the grille.
S86T725PG8U & Variations The loudspeaker assembly shall be a Bogen model S86T725PG8U (or
S86T725PG8UVR, S86T725PG8UVK, S86T725PG8UBR, S86T725PG8UBRVR, or
S86T725PG8UBRVK), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50
Hz to 12 kHz.Axial sensitivity shall be 95 dB,measured at 1-watt/4 feet.The loudspeaker shall have a 6 oz.ceramic magnet and a 3/4" voice coil.A transformer,capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt
line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included.The loudspeaker shall be assembled on a 13" steel ceiling grille, finished in bright white semi-gloss enamel. Assembly depth shall be 3-1/4".
(For S86T725PG8UVR add) A recessed volume control shall be included.
(For S86T725PG8UVK add) A volume control knob shall be accessible from the front of the grille.
(For S86T725PG8UBR add) A terminal strip shall be included for connection of the audio line.
(For S86T725PG8UBRVR add) A terminal strip shall be included for connection of the audio line.
A recessed volume control shall be included.
(For
S86T725PG8UBRVK add) A terminal strip shall be included for connection of the audio line. A volume
control knob shall be accessible from the front of the grille.
S810T725PG8W & Variations The loudspeaker shall be a Bogen model S810T725PG8W (or
S810T725PG8WVR, or S810T725PG8WVK), or equivalent, 8" cone-type loudspeaker, having a frequen-
cy response of at least 70 Hz to 15 kHz. Axial sensitivity shall be 96 dB, measured at 1-watt/4 feet. The loudspeaker shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm
loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be
included. The loudspeaker shall be assembled on a 13" steel ceiling grille, finished in off-white semi-gloss enamel.
Assembly depth shall be 3-1/4".
(For S810T725PG8WVR add) A recessed volume control shall be included.
(For S810T725PG8WVK add) A volume control knob shall be accessible from the front of the grille.
S810T725PG8U & Variations The loudspeaker shall be a Bogen model S810T725PG8U (or
S810T725PG8UVR, or S810T725PG8UVK), or equivalent, 8" cone-type loudspeaker, having a frequency
response of at least 70 Hz to 15 kHz. Axial sensitivity shall be 96 dB, measured at 1-watt/4 feet. The loudspeaker
shall have a 10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker
to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The
loudspeaker shall be assembled on a 13" steel ceiling grille, finished in bright white semi-gloss enamel. Assembly
depth shall be 3-1/4".
(For S810T725PG8UVR add) A recessed volume
control shall be included.
(For S810T725PG8UVK add) A volume control
knob shall be accessible from the front of the grille.
Architect
and Engineer
Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com
Ceiling Speaker
Assembly
Variations
No Volume Control RecessedVolume Control -(VRsuffix) Volume ControlKnob - (VK suffix)
Screw Terminal Strip - (BR suffix)
Rear View