Bogen S86, S810 Features
The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and tr oublefree operation. Their magnetic structure is designed
for maximum air gap energy and the diaphragms have
been selected for high sensitivity and optimized
response characteristics. The speakers are easy to
install in ceiling grilles or wall baffles. Mounting holes
have been provided for quick attachment of a transformer.
Transformers include the Model T725,which matches
an 8-ohm speaker to a 25- or 70-volt line with six
power taps for either v oltage (4,2,1, 1/2,1/4, and 1/8
watt), and the Model T72510 which matches an 8ohm speaker to a 25- or 70-volt line with five power
taps for either voltage (10,5, 2-1/2, 1-1/4,5/8 watts).
The S86 and S810 are available in factory assembled
versions, with the Model T725 transformer already
mounted. The S86 assembly is also available with a
terminal strip (-BR),and volume control (-V).
Bogen also offers the speakers,fully assembled with a
transformer, in an attractively finished wall baffle
(Model WB8), or in ceiling grilles for recessed installation. Assemblies are also a vailable with optional v olume control and/or terminal strip.
S86 S810
Cone Diameter: 8" 8"
Magnet W eight: 6 oz. 10 oz.
Magnet Material: Ceramic Ceramic
Voice Coil Impedance: 8 ohms 8 ohms
Voice Coil Diameter: 3/4" 1"
Frequency Response: 50Hz to 12kHz 70Hz to 15kHz
Axial Sensitivity (at 4 feet with 1-watt input): 95dB 96dB
Power Handling Capacity (program material): 7 watts 15 watts
Depth: 3-1/4" 3-1/4"
Shipping W eight: 16 @ 25 lbs. 16 @ 34 lbs.
Optional Speaker/Transformer Combinations:
S86T725,S810T725 – S86,S810 speaker with 25/70V transformer (Model T725)
S86T725BR – S86 speaker with 25/70V transformer and terminal strip (-BR)
Accessories:
T725 Transformer – 25V or 70V;Power Taps (watts):4,2,1,1/2, 1/4, 1/8; Voice Coil:8 ohms
T72510 Transf ormer – 25V or 70V;Power Taps (watts): 10,5,2-1/2,1-1/4,5/8;Voice Coil:8 ohms
Attenuators – AT10A, AT35A:10-watt and 35-watt, respectively
Specifications
Description
Features
Cone Loudspeakers,Wall Baffle ,
Ceiling Grilles, and Assemblies
Specifications subject to change without notice.
©2001 Bogen Communications, Inc .
Part No.54-7777-06R2 Printed in U.S.A. 0106
• High quality,direct radiator speakers
• 7 watts and 15 watts power handling capacity
• Provision for quick attachment of transformer
• Available with transformer mounted and wired
Speaker Model
Variations and
Accessories
S86
S810
Wall Baffle, Grilles, Accessories
• Sturdily constructed
• Attractively styled and finished
• Wall baffle surface mounts at an angle for downward sound dispersion
WB8 W all Baffle
The WB8 baffle is ruggedly constructed of 3/8" particle board, glued and covered in
simulated walnut vinyl with a black grille cloth. Side corner joints are reinforced with
glue blocks. It is handsomely styled and looks well in virtually any decor. The sloping front provides extra downward sound dispersion.
Ceiling Grilles
Sturdily constructed and handsomely styled,these metal grilles protect and conceal
recessed 8" ceiling speakers. They are shipped complete with the hardware needed
to mount speaker to grille. Models CG8A, CG8AW, PG8A, PG8W,and SG8W.
RE84 Ceiling Speaker Enclosure
The RE84 is a protective enclosure for an 8" speaker,designed for recessed installations, and for use with any of the Bogen ceiling grilles. One-piece steel construction includes a mounting ring and a foam insert to reduce metallic resonance. The
RE84 is finished in rust-resistant black primer and is tapered for easy stacking.
UL approved.
MR8 Mounting Ring
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles,
for installations where the RE84 is not used.
TB8 Tile Bridge
The TB8 is a load bearing T-bar suppor t designed to sustain the weight of an 8"
speaker,grille and protective enclosur e in suspended ceiling construction. Use of the
TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'by-4' acoustic ceiling tiles.
Speaker Line Attenuators
The AT10A and AT35A are 10-watt and 35-watt attenuators that permit setting
the output level at loudspeakers on a 25V or 70V line without altering the amplifier
volume setting. They provide a choice of 10 stops and an "off" position.
2
Technical Specifications
Wall Baffle Ceiling Grilles
WB8 CG8A CG8AW PG8W PG8A SG8W*
Speaker Accommodated 8" cone 8" cone 8" cone 8" cone 8" cone 8" cone
Constructed of 3/8" Particle Aluminum Aluminum Steel Aluminum Steel
Board (contoured) (contoured)
Finish Walnut Vin yl** Satin Semi-gloss Semi-Gloss Satin Semi-Gloss
Aluminum White Enamel White Enamel Aluminum White Enamel
Diameter/Dimensions See Below† 12-
5
/8" 12-5/8" 13" 13" 13"
Shipping W eight 4 @ 10 lbs. 15 @ 8 lbs. 15 @ 9 lbs. 20 @ 27 lbs. 20 @ 10 lbs. 10 @ 13 lbs.
* Features hidden speaker mounting studs • **With black grille cloth • † 9-1/2"W x 9-1/2"H x 5-1/4"D (3-1/4" D at bottom)
WB8
CG8A
(shown),
CG8AW
PG8A
(shown),
PG8W
SG8W
MR8
RE84
TB8
AT10A
Loading...