Bogen RPKUTI1 User Manual

RPKUTI1

Rack Mount &
Security Cover for UTI1

© 2004 Bogen Communications, Inc.
54-2119-01A
Specifications subject to change without notice.
0408

Description

The RPKUTI1 Rack Mount and Security Cover provides protection against tampering of the UTI1
settings and connections and offers the option of rack mounting the UTI1. Knockout sections on

both the cover and the rack ears are provided to facilitate wire entry and exit.

Installation

Rack Ears

Knockouts are located on the sides of the rack
ears for wire access. Remove these knockouts as
needed prior to attaching the rack ears to the

UTI1.

1. Attach each rack ear to the UTI1 using the
screws already installed in the UTI1.

2. Install one of the provided rack ear screws in
the remaining mounting hole of each

RPKUTI1 rack ear.

Security Cover

Knockouts are located underneath and on both
sides of the security cover for wire access.
Remove these knockouts as needed prior to

attaching the security cover to the UTI1.

1. Hook the security cover to the UTI1.

2. Screw the security cover to the UTI1 using

the two security cover screws provided.

Package Contents

• Security Cover

• Rack Ears (2)

• Security Cover Screws (2)

• Rack Ear Screws (2)

Limited Warranty

The RPKUTI1 is warranted to be free from defects in material or workmanship for two (2) years from the date of
sale to the original purchaser. Any part of the product covered by this warranty that, with normal installation and
use, becomes defective will be repaired or replaced by Bogen, at our option, provided the product is shipped
insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. The prod­uct will be returned to you freight prepaid. This warranty does not extend to any of our products that have been
subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or
repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or
defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PUR­CHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT
ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their use

or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product.
In no event shall Bogen be liable for special, incidental or consequential damages (including, but not limited to, loss
of profits, loss of data or loss of use damages) arising out of the manufacture, sale or supplying of products, even
if Bogen has been advised of the possibility of such damages or losses. Some States do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address
as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when
repaired by the Bogen Factory Service Department. All shipping charges in addition to p art s and labor charges will
be at the owner's expense. All returns require a Return Authorization number.

07/20/2004

50 Spring Street, Ramsey, NJ 07446, U.S.A.

201-934-8500; Fax: [phone]

www.bogen.com