Bogen RPK87 User Manual

Model: RPK87

Specifications subject to change without notice.
© 2001 Bogen Communications, Inc.
Part No. 54-2073-01R1 Printed in Korea. 0112

50 Spring Street, Ramsey, New Jersey 07446
Tel. [phone], Fax: [phone], www.bogen.com

Power Vector Amplifier
Rack Mounting Kit

Installation

Power Vector amplifiers may be mounted in 19" racks using the RPK87 rack mounting
kit.After having attached the rack ears, place the amplifier into the rack and secure it to
the rack with appropriate hardware (not included).

To Attach the Rack Ears:

1. If any feet have been attached to the bottom of the amplifier, remove them before
proceeding.

2. Remove and save the five cover screws from the chassis of the amplifier.

3. Position the rack ears as shown in the drawing above.

4. Replace and tighten the cover screws to secure the rack attachments.