Bogen RPK86 Service Manual

Rear of Amplifier

Model: RPK86

Rear of Amplifier

M-Class & Black Max
Rack Mounting Kit

Installation

For greater rear support when rack mounting an M-Class or Black Max amplifier, the
RPK86 Rack Mounting Kit can be attached to the rear of the amplifier by following the
steps below.

1. Remove and save the three cover screws from the chassis of the amplifier.

2. Position the rack attachment as shown.

3. Replace and tighten the three cover screws to secure the rack attachments.

Specifications subject to change without notice.
© 2001 Bogen Communications, Inc.
Part No. 54-2064-01R1 Printed in USA. 0105

50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. [phone], Fax: [phone], www.bogen.com