Bogen PI35A Specsheet

Features

Description

High-Powered

Intercom

Model PI35A

• Cost-effective communication with 25 staff stations

• Step-by-step instructions and color-coded guidelines for easy operation

• Instant Emergency/All Rooms announcements

• Emergency announcements take precedence over program distribution

• Remote emergency paging capabilities

• 20-watt intercom for instant two-way communications

• 35-watt program channel

• Provision for time signalling and voice call-in

• Compact low profile console

• Optional paging facilities permit emergency all-call paging from a remote telephone
or microphone

• Telephone paging captures system priority and overrides all system functions except
the emergency page feature

• Room selector panel is provided to select intercom and program functions for each station

• Calls from stations are initiated through call-in switches and are announced at the control
center by light and tone annunciation

• Two-wire hook-up or voice call-in wiring

• Enclosed in a space-saving console, finished in an attractive simulated wood grain finish

Specifications subject to change without notice.

© 1997 Bogen Communications. Inc.

54-7796-03D 1108

The Bogen PI35A is an executive communications
console completely designed to meet high power
paging and intercom requirements.

The PI35A provides instantaneous intercommunica­tion and background music (or other program) distri­bution facilities for up to 25 speaker-equipped
stations. A 20-watt intercom amplifier features a fre­quency response that has been shaped for maximum
intelligibility. A 35-watt program amplifier ensures that
program material and/or emergency announcements
are clearly heard and easily understood.

Complete facilities are provided for distributing pro­gram material from microphones, CD player or other
background music source. Distribution is accom­plished by simple push-button selection, following the
color-coded guidelines.

The intercom system shall be a Bogen Model PI35A. The
PI35A shall provide instantaneous intercommunication and
background music (or other program) for up to 25 speaker­equipped stations. A 20-watt intercom amplifier shall fea­ture a frequency response that has been shaped for maxi­mum intelligibility. A built-in 35-watt program amplifier shall
ensure that program material and/or emergency
announcements are clearly heard and easily understood.
The front panel shall include step-by-step instructions and
color-coded guidelines for easy access and operation.

Complete facilities shall be provided for distributing
program material from microphones, CD player, or other
background music source. Distribution shall be accom­plished by simple push-button selection, following color­coded guidelines. Emergency announcements shall take
precedence over program distribution and shall be accom­plished with a single push-button selection and a built-in
console microphone. Provision shall be included to permit
the distribution of a time signal to all stations.

Optional paging facilities shall permit emergency all-call
paging from a remote telephone or microphone. Telephone
paging captures system priority and overrides all system
functions except the emergency page feature.

The PI35A shall include a built-in time tone that can be sent
to the entire system, supervisory tone to signal unautho­rized monitoring from the control panel, and monitor speaker
to monitor a program or listen to a station.

A room selector panel shall be provided to select intercom
and program functions for each station. Calls from stations
shall be initiated through call-in switches and shall be
announced at the control center by light and tone annunci­ation. Provisions shall be made for two-wire hook-up or
voice call-in wiring.

The PI35A shall be enclosed in a space-saving console,
finished in an attractive simulated wood grain finish.
The system shall provide a 25-volt balanced output and
operate from a 120V AC, 60 Hz source. Maximum power
consumption shall be 100 watts. Dimensions shall be
20-1/2" W x 8-1/2" H x 11" D. Product weight shall be 24 lb.

Technical

Specifications

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel. [phone] • Fax: [phone]

www.bogen.com

Rated Output: Program – 35WRMS

Intercom – 20WRMS

Frequency Response: Program – +1, -3 dB from 80 Hz to 15 kHz

Intercom – Shaped for maximum intelligibility

Distortion: Less than 1% at rated power and bandwidth

Inputs: Two Lo-Z balanced MIC; Hi-Z unbalanced AUX; Telco Page; 25V Booster

Output: 25V Balanced line, Line Out to Booster

Input Sensitivity: Program – MIC Input: 300μV balanced Lo-Z; AUX: 100mV unbalanced Hi-Z

(for rated output) Telco Page: 100mV unbalanced Hi-Z; Intercom – Listen Mode: 300μV

balanced Lo-Z (Console MIC: 1mV unbalanced Lo-Z)

Controls: Front Panel – Program Selection: MIC 1, MIC 2, AUX; Level: Monitor/

Listen, Program; Distribution: All Rooms, Emergency, Press To Talk;
Indicators: Program Talk/ Level LED

Rear Panel – Input Gain: MIC 1, MIC 2, AUX, Telco Page, Talk, Listen
Internal – Gain: Emergency Page, Supervisory Tone, Time Tone

Enable/Disable: MIC 1/Console MIC; MIC 2/Telco Page, Phantom Power,
Supervisory Tone, MIC 1/Monitor Mute

Tone Specifications: Time Tone – 750 Hz

Supervisory Tone – Repeating, 500 Hz
Call-in Tone –

Repeating; oscillates between 500 Hz and 750 Hz (Switching Freq., 16 Hz)

Power Requirements: 120V AC, 60 Hz, 100W maximum

Phantom Power : 15V DC

Dimensions: 20-1/2" W x 8-1/2" H x 11" D (with sloped top)

Cabinet: Simulated wood grain finish

Panels: Black with color-coded lines and instructions for Intercom, Program, Emergency Page

Product Weight: 24 lb.

Operating Temp.: 0-130° F

Accessory Equipment: CDR1 – CD player and AM/FM Receiver

SCR25A – Call-in module (for switches w/o SCR)
WMT1A – Line-matching transformer for telephone paging
TAMB2 – Telephone access module for telephone paging
DDU250, MBS1000A – Desktop paging microphones
CA10A, CA11A, CA17 – Call-in switches (2-pos., 3-pos., and push-button, respectively)
TWK351 – 2-Wire call-in adapter kit
2518, 2520, 2522 – Connector Kits (18-, 20-, and 22-gauge respectively)
TL156 – Insertion Tool for connector kits

Architect

and Engineer

Specifications