Bogen PG8W, SG8W, CG8A, PG8U, CG8AW User Manual

...

Features

Grilles &

Baffles

GRILLES

• Available in aluminum, bright white, or off-white finish

• Protects and conceals 8" speakers

• Constructed of metal or aluminum

ALL BAFFLE

• Constructed of 3/8" particle board with reinforced corners

• Sloping front panel (13.5 degrees) provides enhanced downward dispersion

Description

Bogen metal grilles protect and conceal recessed 8" ceiling speakers. They are shipped complete with the hardware needed to mount a speaker to the grille.

Bogen’s Wall Baffle, WB8, will house any Bogen 8" speaker. Hardware for mounting a speaker to the baffle included.

PG8A

WB8

Technical

Specifications

Model

Material

Finish

Style

Dimensions

Quantity

Shipping

Weight

(Carton)

CG8A

Aluminum

Satin Aluminum

Contoured

12-5/8" Dia.

15 /

carton

8 lb.

CG8AW Off-white Enamel 9 lb.

PG8A Satin Aluminum

Low

Profile

13" Dia.

20 /

carton

10 lb.

PG8U

Steel

Bright White Enamel

26 lb.

PG8W Off-white Enamel

SG8W Bright White Enamel Low Profile‡

10 / carton 14 lb.

WB8

3/8" particle

board

Simulated Walnut

9-1/2" W x 9-1/2" H x

5-1/4" D

3-1/4" D (at bottom)

4 / carton 10lb.

* Mounting hardware included ‡ Features hidden speaker mounting studs

CG8A CG8AW SG8W

PG8W PG8U

Note: Colors of speakers may not be accurate and should not be used for reference purposes.

50 Spring Street, Ramsey, NJ 07446, U.S.A. Tel: 201-934-8500; FAX: 201-934-9832; www.bogen.com

Ceiling Grilles

(Use for CG8A) The ceiling speaker grille shall be a Bogen model CG8A aluminum grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 12-5/8" and it shall be contoured and finished in satin aluminum. Mounting hardware shall be included.

(Use for CG8AW) The ceiling speaker grille shall be a Bogen model CG8AW aluminum grille, or equivalent, capa- ble of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 12-5/8" and it shall be contoured and finished in off-white semi-gloss enamel. Mounting hardware shall be included.

(Use for PG8A) The ceiling speaker grille shall be a Bogen model PG8A aluminum grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be low profile and finished in satin aluminum. Mounting hardware shall be included.

(Use for PG8U) The ceiling speaker grille shall be a Bogen model PG8U steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.

(Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and it shall be low profile and finished in off-white semi-gloss enamel. Mounting hardware shall be included.

(Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13", the speaker mounting studs shall be hidden, and the grille shall be low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.

WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing an 8" cone-type loudspeaker and angled (13.5 degrees) for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware for mounting the speaker to the baffle shall be supplied. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D (top) x 3-1/4" D (bottom).

Architect

and Engineer

Specifications