Bogen Paging Service Manual

PAGING SITE SURVEY SHEET

Before you begin designing or quoting a job, you will need some basic information regarding the site and the end-user’s needs. Use the Site Survey Check List below to ensure that you collect all the information you will

eed to complete the design of the paging system.

Tools Needed

• measuring wheel/tape measure • sound pressure meter calculator • Bogen Products catalog

•

Obtain a copy of the floor plan of any areas that may require special design considerations (high shelving, machinery location, decibel measurements, exposed beams, etc.).

CUSTOMER INFORMATION PERSON COMPLETING FORM

Company: ______________________________________

Contact: ______________________________________

Address: ______________________________________

______________________________________

City/State/Zip: ______________________________________

Phone: ______________________________________

Fax: ______________________________________

E-mail: ______________________________________

SITE SURVEY CHECK LIST

Section I – System Needs concerns the requirements of the entire installation. Section II – Specific Area Needs concerns specific areas within the installation.

Note: Installations that contain areas with different style environments or sound levels may require Section II to be filled out separately for each area. Be sure to make enough copies of this page for this purpose.

I. SYSTEM NEEDS

a. What Type of Telephone Port Will Be Available for Connection

to the Paging System?

❑

Loop Start

❑

Page Port

❑

Other: _____________________________

How Many MIC Inputs Needed? ________

b. c.

How Many AUX Inputs Needed? ________

ging Requir

Is Zone P

If y

Is Talk Back Required?

If yes, in individual zones? If yes, system-wide (no zones)?

Is Group Paging Required?❑Ye s❑No Ar

❑

How Can the Amplifier Be Mounted?

❑

Amplifier Features Needed:

❑ ❑ ❑ ❑ ❑

Any Technology Preference?

❑

w many zones: __________________

es,

Tones Needed to Signal Shift Changes?

Time

Yes ❑No

Rack ❑Wall ❑Shelf

Aphex™Aural Exciter

el Contr

Automatic Le Bass & Treble Controls Automatic Mute MOH Output

None ❑70V Central Amplifier ❑Self-Amplified 24V Equipment

❑

Ground Start

❑

Analog Station Port

ed?

❑

Yes❑

❑

Ye s❑No

❑

Ye s❑No

❑

Ye s❑No

❑

ol (ALC)

❑ ❑ ❑ ❑

Variable Loudness Contour Control

phic Equalizer

Gra

Variable Mute Manual Mute Night Ringer

Company: ______________________________________

Contact: ______________________________________

Address: ______________________________________

______________________________________

City/State/Zip: ______________________________________

Phone: ______________________________________

Fax: ______________________________________

E-mail: ______________________________________

SPECIFIC AREA NEEDS

II.

a. Area Name/Description: ___________________________________ b.

Area Dimensions:

Length __________________ ft. Width ___________________ ft. Square Footage ___________ sq. ft. Ceiling Height _____________ ft.

Ambient Noise Le

Will There Be Large Changes in Ambient Noise Levels in the Area?

❑

Yes ❑No

If yes, note range:

vironment:

❑

Office/Pr

❑

Institutional/Remote Public

❑

Aisles created by high storage racks❑Hallways

❑

Cafeteria/Break Room

❑

Loading Docks/Outdoor Areas

Where Will the Speakers Be Placed?

❑

Indoors ❑Outdoors

w Can the Speak

❑

Suspended/Dr

❑

Beams, Columns, Other Structures

e note of any changes in surfaces or positions for actual speaker mounting.

* Mak

e note of any c

** Mak

h. Are Volume Controls Mounted on Each Speaker Needed?

❑

Yes ❑No

Are Wall-Mounted Attenuators Needed for Area’s Volume Control?

❑

Yes ❑No

eedback Elimination Equipment Needed?

Is F

Is Background Music Needed?❑Yes ❑No

If yes, BGM source:

vel:

____________ dB

____________ dB to ____________ dB

ofessional/Retail Store

ers Be Mounted?

op Ceiling*

hanges in wall angles, surfaces, or height.

❑

CD Player ❑Other: __________________

❑

Tuner ❑Tape Player/Tuner

Antenna Available for tuners?

Area

❑

Factor

❑

Warehouse

❑

Auditorium

❑

Other: __________________

❑

y/Industrial

all**

❑

Yes ❑No

❑

www.bogen.com 1-800-999-2809

Sound Pressure Level Chart

Typical Ambient Noise Level Typical Environments

ery High Noise

igh Noise

5-95 dB

5-85 dB

Speech Almost Impossible

o Hear

peech is Difficult To Hear

Construction Site • Loud Machine Shop

oisy Manufacturing • Printing Shop

ssembly Line • Crowded Bus/Transit Waiting Area

achine Shop • Shipping / Warehouse

Supermarket (Peak Time) • Very Noisy Restaurant/Bar

5 dB

85 dB

ank/Public Area • Department Store

Medium Noise 65-75 dB

ow Noise

5-65 dB

ust Raise Voice

to be Heard

peech is Easy To Hear

Noisy Office • Restaurant/Bar

upermarket • Trans Waiting Area

Conversational Speech • Doctor’s Office

Quiet Office • Very Quiet Restaurant/Bar

ospital • Hotel Lobby

Use the area below to sketch the job site. For each area, please note:

- Type of area - Room dimensions and ceiling heights - Sound pressure levels

- If zone paging, the zone number - Paging only, or paging with music

Area 1 _____ SPL _____ Dimensions Ceiling Height

one #

Z _____ Page only _____ Page/Music

a 2 _____ SPL _____

Are

imensions

eiling Height

C Zone # _____ Page only _____ Page/Music

a 3 _____ SPL _____

Are

imensions

eiling Height

C Zone # _____ Page only _____ Page/Music

a 4 _____ SPL _____

Are

imensions

eiling Height

C Zone # _____ Page only _____ Page/Music

a 5 _____ SPL _____

Are

imensions

eiling Height

C Zone # _____ Page only _____ Page/Music

75 dB

65 dB

55 dB