Bogen NQ-GA10P, NQ-GA10PV Specsheet
PLENUM-RATED VoIP
INTERCOM MODULES
Models NQ-GA10P,
NQ-GA10PV
DESCRIPTION
Bogen’s plenum-rated Nyquist VoIP intercom modules offer a convenient and cost-effective means of transforming any lowimpedance analog speaker into a full-featured Power-over-Ethernet (PoE) IP speaker. They utilize the latest technology to deliver
superior audio quality, making them perfect for IP paging and audio distribution, while the built-in talkback capability allows them to
be used in VoIP intercom applications. Designed with the commercial sound contractor in mind, these intercom modules’ plenum-
rating provides unparalleled exibility and versatility to help simplify site design.
In addition to their wide-ranging exibility, these intercom modules use the latest in Class D amplier technology and provide
unmatched sonic quality, exceptional reliability, and reduced power consumption to permit standalone PoE operation over the
local network.
These 10-watt, single channel, intercom modules are available with or without an HDMI video output, depending upon the application
needs. They also offer a CAN bus interface to work with the NQ-E7020 Digital Call Switch and a Form-C relay for controlling thirdparty devices. Additionally, when paired with Bogen’s ANS500M microphone module (optional), these intercom modules can be
turned into an ambient noise sensor to help maintain paging and background music intelligibility in high-noise environments.
FEATURES
• Power-over-Ethernet (PoE) 802.3af compliant
• Low-impedance (8 ohm) speaker output
• Network-based audio output (paging, intercom, audio
distribution)
• Talkback support
• Push-to-Talk Microphone support (Bogen DDU250
or equivalent)
• Audio input that can be routed anywhere over Bogen’s
Nyquist network
• DSP-based noise rejection and voice bandwidth optimization
• Web-based configuration
• Analog Call Switch support (Bogen CA15C, or equivalent)
• Digital Call Switch support (Bogen NQ-E7020)
• Control Relay Output
• HDMI Video Output (NQ-GA10PV model only)
• In-wall, in-ceiling, shelf, or device mountable UL 2043
plenum-rated package
• Integrated slotted mounting flanges
• Optional 48VDC External Power Supply (PS4815W;
sold separately)
Model NQ-GA10P Model NQ-GA10PV
A & E SPECIFICATIONS
The Nyquist based plenum-rated VoIP intercom module shall be a model (NQ-GA10P or NQ-GA10PV) rated at 10 watts RMS and shall
utilize UL 2043 plenum-rated packaging. The intercom module shall be capable of being powered by either 802.3af compliant Power-over-Ethernet (PoE) switch, PoE injector, or model PS4815W 48 - 56VDC .3A (5.5mm x 2.1mm Barrel Jack) power supply when PoE
isn’t available. The intercom module shall provide a frequency response @ 1 Watt 20-20 kHz +/- 0.25 dB at rated power. Distortion
shall be less than 0.03%. The intercom module shall contain one control relay output SPDT Rated 2A; NC (Normally Closed); Common;
NO (Normally Open); and G (Ground). The intercom module shall be capable of supporting Digital Call Switch(es) model NQ- E7020
and/or CA-15C or CA-21B analog call switches. The intercom module shall provide support for a Bogen DDU250 Push-to-Talk micro-
phone. Intercom modules that don’t provide Push-to-Talk microphone support shall not be considered equal. The intercom module
output shall provide 8-ohm speaker output. The NQ-GA10PV version intercom module shall contain one HDMI output supporting
HDMI 1.3 (max. 1920 x 1080 @ 30 Hz) for connection to an LCD display or other visual display device. The amplier shall employ
convection air cooling. Ampliers that require fans for cooling shall not be considered equal.
The C4000 Series is built upon Bogen’s award winning Nyquist software-based IP communications platform,
which provides users with unparalleled exibility and scalability in whatever their application.
NQ-GA10P, NQ-GA10PV Front Panel
TECHNICAL
SPECIFICATIONS
Power Output 10W @ 8 ohms
S/N Ratio (20k BW) 80 db
Power Output Bandwidth 20 Hz - 20 kHz < .1% THD+N
THD+N @ 1 kHz Rated Power < .05% THD+N
Rated Load Impedance 8 ohms
Frequency Response @ 1 Watt 20 Hz -20 kHz +/- 0.25 dB
Audio Amplifier Class of Operation D
External DC Power 48 - 56VDC .3A (5.5mm x 2.1mm Barrel Jack)
DC Input Range 15-Watt 48V to 56V
PoE (Power over Ethernet) IEEE 802.3af standard, Class 3 device (RJ45)
Input/Output Connector 12-pin Phoenix Plug/Header
CAN Bus Port
Call Switch Input
Analog Speaker Connection Phoenix Plug Terminals 1 & 2
Audio Talkback Half-Duplex using the analog speaker for talkback; Phoenix Plug Terminals 1 & 2
Ambient MIC Input Ambient Noise Sensor Microphone (ANS500M); Phoenix Plug Terminals 1 & 2
Push-to-Talk Mic Connection DDU250 or equivalent; 500-ohm impedance with a 4-conductor cable (2 shielded)
PTT dry contact switch on Phoenix Plug Terminals G & A; Mic audio on Phoenix Plug Terminals 1 & 2
Relay Contacts SPDT Rated 2A; NC (Normally Closed); Common; NO (Normally Open); G (Ground)
HDMI Output N/A HDMI 1.3 (max. 1920 x 1080 @ 30 Hz)
Indicators Power & Status LEDs (front) / Network LEDs (front)
Operating Temperature Range -15 C to +40 C
Protection ESD, RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting
Networking Cat5 or better 10/100 network connectivity to Bogen's Nyquist network
Certifications CE and FCC Part 15b Class A; ICES-003,
Issue 6: 2016; EN 55032:2012; EN 55035:2017;
UL 2043; carries NRTL Safety Mark
(1)
5VDC; CH (CAN Hi); CL (CAN Low); G (Ground); Bus Speed 125 kbits/sec
48V
NQ-GA10P
Rear Panel
CAN
RELAY
NC COM NO G
AUDIO I/O
G A 1 2
5V CH CL G
®
HDMI OUT
®
NQ-GA10P NQ-GA10PV
(2)
Dry Contact Closure on Phoenix Plug Terminals G & A
FCC Part 15b Class A; ICES-003,
Issue 6: 2016; EN 55032:2012; EN 55035:2017;
UL 2043; carries NRTL Safety Mark
POWER
STATUS
CAN
5V CH CL G
RELAY
NC COM NO G
NQ-GA10PV
Rear Panel
AUDIO I/O
G A 1 2
Product Weight 0.7 lbs.
Physical Dimensions: 3.75” W x 7/8” H x 6.2” D (depth includes Phoenix connector)
(1) For connection to Bogen's NQ-E7020 Digital Call Switch; (2) Bogen CA-15C or equivalent
Limited Warranty, Exclusion of Certain Damages
The NQ-GA10P and NQ-GA10PV are warranted to be free from defects in materials and workmanship for ve (5) years from the date of sale to the original purchaser. Any part of the product
covered by this warranty that, with normal installation and use, becomes defective (as conrmed by Bogen upon inspection) during the warranty period will be repaired or replaced by Bogen, at Bogen’s
option, with new or refurbished product, provided the product is shipped insured and prepaid to: Bogen Factory Service Department: 4570 Shelby Air Drive, Suite 11, Memphis, TN 38118, USA. Repaired or replacement product(s) will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation
or have been modied or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY
LAW. Bogen’s liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product.
IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING
OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from State to State.
Products that are out of warranty will also be repaired by Bogen Factory Service Department -- same address as above or call 201-934-8500, at owner’s expense. Returned products which do not qualify for
warranty service, may be repaired or replaced at Bogen’s option with a previously repaired or refurbished items. The parts and labor involved in these repairs are warranted for 90 days when repaired by the
Bogen Factory Service Department. All parts and labor charges as well as shipping charges will be at the owner’s expense.
All returns require a Return Authorization number. For most ecient warranty or repair service, please include a description of the failure.
09/2017
1200 MacArthur Blvd., Suite 304, Mahwah, NJ 07430 • 1-800-999-2809
www.bogen.com
© Copyright 2018, Bogen Communications, Inc. 740-00020B 1807
Loading...