Bogen NQ-A2060, NQ-A2120, NQ-A2300 Specsheet

NETWORKED 2-CHANNEL AUDIO POWER AMPLIFIERS

Models NQ-A2060, NQ-A2120, NQ-A2300

DESCRIPTION

Bogen’s Nyquist based networked audio power ampliers offer cost-effective performance for permanent installations and commercial sound, and are designed to meet the rigorous requirements of today’s sophisticated sound systems. Designed with the commercial sound contractor in mind, they provide unparalleled exibility and versatility without the need for add-on modules. They offer state-of-the-art, built-in DSP software for extensive and comprehensive signal processing, including factory loudspeaker presets, which turns the amplier into a complete audio solution.

These 2-channel ampliers are available in 120, 240, and 600-watt models, each with the same features to provide power and performance, no matter how large or small the application.

In addition to their extensive exibility, the Nyquist networked audio power ampliers use the latest in Class D amplier technology and provide unparalleled sonic quality, exceptional reliability, and reduced heat output for increased operating eciency.

FEATURES

• 1 dedicated Balanced Line Input (both Phoenix plug & XLR)

• Line Input that can be routed-out over the Nyquist network

• Network-based audio input (paging, audio distribution)

• 4 ohm, 8 ohm, 25V, and 70V outputs

• GUI based DSP control

- 16-band Graphic Equalizer

- Signal Present and Clip Monitor

- Adjustable High Pass, Low Pass, and Bandpass Filters

- Noise Gate

- Compressor/Limiter

- 7-band Parametric Equalizer

• Switch selectable 2-channel or 1-channel bridged operation

• Safety: CAN/CSA C22.2 No. 62368-1:2014;

UL62368-1:2014; EN 62368-1:2014

• EMC: FCC Part 15b Class A; ICES-003,Issue 6: 2016;

EN 55032:2012; EN 55035:2017

• 1/2 Rack Width - Wall, Rack, or Shelf mountable –

1RU and 2RU packages

• 19” Rack Mount Kit (NQ-RMK03; sold separately)

Models NQ-A2060 & NQ-A2300 shown

A & E SPECIFICATIONS

The Nyquist based two channel amplier shall be a model _____, rated at ____ watts RMS per channel (NQ-A2060/2x60 watts, NQ-A2120/2x120 watts, and NQ-A2300/2x300 watts) with switch selectable 2-channel or 1-channel bridged operation. The amplier shall have one dedicated Balanced Line Input with both Phoenix plug & XLR connections. The amplier shall provide a frequency response from 20-20 kHz +/- 0.25 dB at rated power. Distortion shall be less than 0.03%. The amplier shall include GUI based DSP

controls; 16-band Graphic Equalize; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters;

Noise Gate; Compressor/Limiter; and 7-band Parametric Equalizer. Outputs shall be provided for 4-ohm, 8-ohm, 25V, and 70V distributed systems. The amplier shall be rack mountable 1/2 Rack Width - Wall, Rack, or Shelf mountable 1RU and 2RU packages or by using a 19” Rack Mount Kit (NQ-RMK03; sold separately). It shall carry the necessary safety agency listings for both the United States and Canada. The amplier shall employ convection air cooling. Ampliers that require fans for cooling shall not be considered equal.

The C4000 Series is built upon Bogen’s award winning Nyquist software-based IP communications platform, which provides users with unparalleled exibility and scalability in whatever their application.

NQ-A2060, NQ-A2120

Models

Front/Rear Panels

Audio Power Amplifier

TECHNICAL SPECIFICATIONS

POWER

STATUS

LINE INPUT

+ –

– +

BRIDGED

2 CHANNEL

70V/25V/8Ω

25V/4Ω

Model NQ-A2300 Front/Rear Panels

Limited Warranty, Exclusion of Certain Damages

The NQ-A2060, NQ-A2120, NQ-A2300 are warranted to be free from defects in materials and workmanship for ve (5) years from the date of sale to the original purchaser. Any part of the product covered by this warranty that, with normal installation and use, becomes defective (as conrmed by Bogen upon inspection) during the warranty period will be repaired or replaced by Bogen, at Bogen’s option, with new or refurbished product, provided the product is shipped insured and prepaid to: Bogen Factory Service Department: 4570 Shelby Air Drive, Suite 11, Memphis, TN 38118, USA. Repaired or replacement product(s) will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modied or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale or supplying of products or their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by Bogen Factory Service Department -- same address as above or call 201-934-8500, at owner’s expense. Returned products which do not qualify for warranty service, may be repaired or replaced at Bogen’s option with a previously repaired or refurbished items. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All parts and labor charges as well as shipping charges will be at the owner’s expense.

All returns require a Return Authorization number. For most ecient warranty or repair service, please include a description of the failure.

1200 MacArthur Blvd., Suite 3

04, Mahwah, NJ 07430 • 1-800-999-2809

09/2017

www.bogen-ip.com