Bogen MBK-06, BBX-6, BRG-6 Specsheet
BBX6BBX6
BBX6
BBX6BBX6
BRBR
BR
BRBR
MBK6MBK6
MBK6
MBK6MBK6
■
The Penton Audio BBX6 enclosure,
BRG6 tile bridge and MBK6 assist
mounting 6” RCS Series, torsion-spring
speaker packages. In suspended ceiling
applications BRG6s and BBX6s work in
concert to provide ceiling mounting
without hardware. The BRG6 and
MBK6 are galvanized steel, while the
BBX6 is black powder-coated CRS.
The BBX6 has a wool/fiberglass pad to
help eliminate acoustical resonances
and 12 conduit connections with equally
spaced knockouts - four dual 3/4” by 11/8” knockouts and four 5/8”. The BRG6
has two 1/4” edge strength flanges and
three small flanges to Slide-in-Lock
the BRG6 enclosure in place during
installation.
The MBK6 is designed to assist in blindmount torsion-mount applications
including drywall, wood and plaster
ceilings/walls. To install simply loosen
the bracket jaws with the integral
plastic knobs. Place the bracket into
the precut hole with the jaws
perpendicular to the surface. Slide the
jaws down to grip the top surface and
tighten the plastic knobs.
■
• BBX6 INTERNAL VOLUME:
• BBX6 KNOCKOUTS:
• DIMENSIONS, INCH:
• REQUIRED CUT-OUT DIMENSION:
• NET WEIGHT LBS (KGS)
G6G6
G6
G6G6
DESCRIPTIONDESCRIPTION
DESCRIPTION
DESCRIPTIONDESCRIPTION
SPECIFICSPECIFIC
SPECIFIC
SPECIFICSPECIFIC
160.2 cubic inches
Four dual 3/4” - 1-1/8”
Four 5/8”
BBX6: 7.5 x 7.25 x 3.75
BRG6: 23.75 x 12.75 x 0.5
MBK6: 8.375 x 2.375 x 4.5
7.78” diameter
BBX6: 1.25 (8.40)
BRG6: 1.33 (21.17)
MBK6: 0.45 (0.21)
AA
TIONSTIONS
A
TIONS
AA
TIONSTIONS
TM
Enclosure
Tile Bridge
Mounting Bracket
BRG6
MBK6
Mounting Bracket
4.33"
(1 1 0m m)
7.87"
(200 mm)Cutout
ARAR
CHITECTCHITECT
■
AR
CHITECT
ARAR
CHITECTCHITECT
Enclosure shall be Penton Audio Model
BBX6 or approved equal. It shall mate
with BRG6 and torsion-mount RCS
series speaker packages. It shall be
made of cold rolled steel, and measure
7.5” x 7.25” x 3.75”. Unit shall have an
acoustically absorbent wool/fiber-glass
pad, 12 knockouts available and have a
baked-on black powder-coat enamel
finish.
SS
’’
AND ENGINEERS AND ENGINEERS
S
’
AND ENGINEERS
SS
’’
AND ENGINEERS AND ENGINEERS
Tile Bridge
1.97"
(47 mm)
’’
SPECIFIC SPECIFIC
’
SPECIFIC
’’
SPECIFIC SPECIFIC
BBX6
Steel Backbox
BRG6
Speaker
Tile Bridge
Attach Backbox to
T ile bridge using
4 screws provided
Ceiling Tile
Assemblies shall
mount to Backbox
using two Springs
AA
TIONS:TIONS:
A
TIONS:
AA
TIONS:TIONS:
Tile Bridge shall be Penton Audio
Model BRG6. Unit shall mate with
BBX6 enclosure and be made of
galvanized steel. Unit shall measure
23.75” x 12.75” x 0.50”.
Mounting bracket shall be Penton Audio
Model MBK6 or equal. Unit shall
recess mount Penton RCS6 Series
torsion-spring loudspeaker packages. It
shall measure 8.375” x 2.375” x 4.5” and
be constructed of galvanized steel.
Cut 7.87" (200 mm)
Round H ole in
Ceiling Tile
RCS
Ceiling
Loudspeaker
22
2
22
- a s u b s id er ar y o f Pen t o n M ed ia Tech n ologies
Phone: (888) 88 3 -838 3 Fax: (888) 82 1 -212 1 Web s ite : w w w. pento n -us a .co m
2002 Penton Audio USA Specifications subject to change without notice SS02-2021
©
406 Lincoln St., Marlb orough , MA 01752
Loading...