Bogen HFCS1B, HFCS1LP Specifications

SPECIFICATIONS

HFCS1 HFCS1LP

Frequency Response (-10 dB)

*

65 Hz to 19 kHz 78 Hz to 19 kHz

LF Driver 6-1/2" (165mm) Polypropylene Cone

HF Driver 3/4" (20mm) Polycarbonate Dome

Sensitivity (1W/1m)

89 dBspl (Average 100 Hz - 10 kHz)

Impedance Ratings

Low (16 ohms) / High (70V/100V)

Power Input (Max.) 75W @ 16 ohms; 32W @ 70V/100V

Power Settings (in watts)

†

70V: 32, 16, 8, 4, 2, 1 / 100V: 32, 16, 8, 4, 2

Baffle Material Fire-rated (94VO) ABS

Back Can Material Heavy-Gauge Steel

Terminations 4 Terminal Plug-in Input Connector

Product Weight

9 lb. 8 lb.

Speaker Dimensions 12-5/16" dia. x 12" D 12-5/16" dia. x 7-3/4" D

Minimum Vertical Clearance Requirement

11" 6-3/4"

Included Accessories Input Terminal Cover (2 Halves); (4) Screws; (1) Plug-in Input Connector

Optional Accessories Tile Bridge Support Ring (TBCR); Cable Kit (CK10)

Baffle Ring & Grille Color Off-white or Black

• Wide-dispersion coaxial driver for broad, even coverage

• Good off-axis response with smooth contouring

• Computer-matched venting system for full bass output

• Large back can for deeper bass response (HFCS1/B)

• Low-profile housing allows greater range of installations
(HFCS1LP/B)

• High power handling capability for foreground sound

• Selectable power taps via front-mounted control

• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V;
32, 16, 8, 4, and 2 for 100V

• 16-ohm input for non-transformer, multi-speaker
systems (selectable via tap selector switch)

• Compounded rubber surround, plus polypropylene and
polycarbonate drivers for lasting performance

• Easy wiring with plug-in connector

• Integral swing-out clamps for easy installation

• Connector provides loop-through terminals for the
next speaker

• Attachment point for seismic cable (safety cable)

• Input terminal cover with knockouts and safety eyelet
provides protection for connections

• Off-white or Black textured finish easily painted to
match theme decor

• Attractive, contemporary, sturdy steel grille assembly
with fine perforations

• Listed to UL Standard 60065 for US and Canada

• Independently tested and meets requirements of
UL-2043 (report available)

• Accessory tile bridge support ring (Model TBCR,
sold separately)

• Accessory 10-foot long cable kit (Model CK10,
sold separately)

Features

Description

Specifications subject to change without notice.

© 2006 Bogen Communications, Inc.

54-8016-03D 1302

High-Fidelity
Ceiling Speakers

Models:

HFCS1 (Off-white) / HFCS1B (Black)
HFCS1LP (Off-white) / HFCS1LPB (Black)

The Bogen HFCS1(B) and HFCS1LP(B) ceiling loudspeakers deliver superior sound and clear intelligibility in a variety
of ceiling environments.

The system can be easily installed in hard-surfaced ceilings, suspended ceilings, and new constructions.

Both speakers offer several levels of power output controlled via a front-mounted rotary tap selector switch (under grille).
The low-distortion speaker design, coupled with a computer-matched venting system, delivers high intelligibility and
exceptional low-frequency response for both music and speech reinforcement.

Technical

Specifications

*

Half-Space Response

† Front panel, switch-selected

HFCS1(B)

HFCS1LP(B)

The loudspeaker shall be a Bogen Model HFCS1 or
HFCS1LP Ceiling Speaker or approved equivalent, con­sisting of one 6-1/2" (nominal) low frequency transducer,
one 3/4" (nominal) high frequency transducer, and a filter
network for dividing frequencies between the transducers.

The front baffle shall be injection-molded ABS material
and the back can (enclosure) shall be made of steel.
All components shall be mounted inside the enclosure.

The baffle shall be supplied in off-white or black (B ver­sions) with a mild texture finish to promote paint adhe­sion, if desired. A perforated steel speaker grille shall be
provided, color-matched to the baffle.

The low-frequency driver shall utilize a molded polypropy­lene diaphragm (cone). A compounded rubber cone
surround shall be formulated to withstand environmental
conditions with high or low heat, high or low humidity, and
ultra-violet light.

The high-frequency driver shall utilize a diaphragm
consisting of black polycarbonate.

Integral swing-out clamps shall provide a secure installa­tion in the ceiling surface. A safety cable attachment point
shall be included in the removable terminal enclosure
cover. An optional 10-foot long cable kit shall be available
to serve as a backup safety cable (Model CK10).

An optional tile bridge/support ring installation bracket
(Model TBCR) shall provide additional support when
mounting the loudspeaker into suspended ceilings. The
bracket shall also serve as a pre-installation guide for new
construction installations, and provide attachment to either
16" OC or 24" OC mounting.

The input connector shall be a 4-screw pluggable input
connector, providing loop-through terminals for additional
speakers.

Power input selection shall be via a front-mounted rotary
switch, located under the removable grille. High imped­ance tap selections shall be 1, 2, 4, 8, 16, and 32 watts. A
low impedance 16-ohm selection shall also be provided.

Dimensions of the speaker shall not exceed 12-5/16"
diameter x 12" D (HFCS1/B) or 12-5/16" diameter x
7-3/4" D (HFCS1LP/B). The speaker shall require a min­imum vertical clearance of 11" (HFCS1/B) or 6-3/4"
(HFCS1LP/B). Product weight shall be 9 lb. (HFCS1/B) or
8 lb. (HFCS1LP/B).

Architect and

Engineer

Specifications

50 Spring Street, Ramsey, New Jersey 07446, U.S.A.

201-934-8500 • Fax: [phone]

www.bogen.com

Polar
Response

500 Hz

1 kHz
2 kHz

4 kHz
8 kHz

16 kHz

HFCS1

HFCS1LP

Frequency
Response

Half-space,
16 Ohms,
1W @ 1m

(dBspl)

(Hz)

Output Level @ 1m

Both speakers

110

100

90

80

70

60

40

100

1000

10000