Page 1
CEILING GRID
CEILING GRID
SUPPORT RAIL
CROSSBAR INCLUDED
(2 ft. X 4ft. CEILING GRID ONLY)
CEILING TILE
(CUT IN HALF, OR NO MORE
THAN 23-3/4")
CSD2X2
CSD2X2
2 ft. X 2ft.
TILE SPACE
2 ft. X 4ft.
TILE SPACE
Drop-In Ceiling Speaker
with Back Can
CSD2X2 & Variations
Bogen’s CSD2X2 Drop-In Ceiling Speaker is a full-range
speaker that allows for fast and easy installation, which
saves installation time, effort, and cost.
The CSD2X2 is a 2' x 2' speaker that fits perfectly into
place in 2' x 2' ceiling grids – without needing to cut
ceiling tiles or requiring the use of tile support rails. The
CSD2X2 can also be easily installed in 2' x 4' ceiling
grids – just make one cut to the ceiling tile, position the
support rail (included), and drop the speaker into place.
• Finely perforated grille over the entire front of speaker
• Fully enclosed, industrial grade steel construction
• Enclosed Back Can
• 8'' main cone with secondary high-frequency cone
• 70V/25V, 4-watt transformer (4, 2, 1, 0.5, 0.25 watt) taps;
selected by rotary switch
• Seismic attachment points
• Available in off-white and bright white (“U” versions)
grille finish
• ''VR'' versions have a Recessed Volume Control
(front-mounted)
• Listed to UL Standard 1480 for U.S. use
• Support Rail Crossbar (included)
Plenum-Rated
and Listed to
UL-1480*
Plenum-Rated
and Listed to
UL-1480*
*Listed to UL Standard 1480 for U.S. use
Page 2
Frequency Response . . . . . . . . . . 95 Hz to 20 kHz
SPL @ 1W / 1m . . . . . . . . . . . . . . . 94 dB
Power Taps . . . . . . . . . . . . . . . . . . 4, 2, 1, 0.5, 0.25 watts
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . .
8" main cone with secondary
high frequency cone
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)
Dimensions . . . . . . . . . . . . . . . . . .24" W x 4-7/8" H x 24" D
Product Weight . . . . . . . . . . . . . . .12 lb.
70V and 25V Compatible.
Plenum-Rated and Listed to UL Standard 1480 for U.S. use.
The speaker shall be a Bogen Model CSD2X2 or CSD2X2VR Drop-In
Ceiling Speaker, which shall be fully enclosed and constructed of
industrial grade steel. It shall be comprised of a damped highcompliance factory-mounted 8" loudspeaker that shall consist of an
8" treated paper main cone, a secondary high frequency cone, and
a 10 ounce magnet. The unit shall have a 70V/25V transformer with
power taps of 4, 2, 1, 0.5, and 0.25 watts, selectable by rotary
switch. Output shall be 94 dB @ 1 watt / 1 meter (min.). Frequency
response shall be 95 Hz to 20 kHz (min.). The speaker shall include
4 seismic attachment points. The speaker shall have a non-reflective, off-white or bright white (''U'' versions) metal finish grille. Speaker
is listed to UL Standard 1480 for U.S. use.
For CSD2X2VR: A front-mounted volume control shall be easily accessible.
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling tiles.
For 2' x 2' installations, a support rail shall not be needed and no
cuts to the ceiling shall be necessary. For 2' x 4' installations,
a single cut to the ceiling tile and an included support rail shall be
needed. The speaker shall measure 24" W x 4-7/8" H x 24" D and
shall weigh 12 lb.
SPECIFICATIONS
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
54-9266-01E 1208
FINELY PERFORATED
METAL FINISH GRILLE
FRONT-MOUNTED
VOLUME CONTROL
(''VR'' VERSION)
Drop-In Ceiling Speaker CSD2X2 & Variations
CSD2X2
CSD2X2U
CSD2X2VR
CSD2X2VRU
Model
Off-white Finish
Bright White Finish (U)
Back Can
Recessed Volume
Control (VR)
●
●
●
●
●
●
●
●
●
●
SUPPORT RAIL
CROSSBAR INCLUDED
(FOR USE WITHIN 2' X 4' TILE SPACE ONLY)
SEISMIC
ATTACHMENT
POINTS (4X)
Lead Color
70V Red
25V Yellow
COM Black
WIRE
NUTS
COVER
WIRE
NUTS
COVER
Loading...