Bogen ADP1 Specsheet
• Analog ringdown line operation
• Suitable for indoor or outdoor station, door, or
gate communication
• Telephone line powered
• Two-way, hands-free communication
• Weather-resistant
• Vandal-resistant brushed stainless steel face plate
with mounting gasket and heavy-duty call button
• Plastic cone speaker with puncture-resistant,
protective screen
• Rough opening dress bezel for flush mount
installations
• Adjustable microphone and speaker volume
• Adjustable call timer duration
• Defeatable call timer
• Responds to forward disconnect
• Selectable Auto Answer feature allows remote
audio monitoring of ADP1 location
• “Active” LED for use when installing and
troubleshooting
Features
Description
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
Part No. 54-8021-01A Printed in U.S.A. 0406
Analog Door
Phone
Model ADP1
The ADP1 is a convenient remote, weather-resistant, hands-free two-way terminal device for telephone systems.
The unit is telephone line powered and includes adjustable microphone and speaker volume levels as well as a
selectable Auto Answer feature to allow for remote audio monitoring of the area where the ADP1 is located.
The ADP1 also includes an adjustable and defeatable call timer and can respond to forward disconnect signals.
The ADP1 features a heavy-gauge stainless steel gasketed faceplate and plastic cone speaker with punctureresistant screen.The ADP1 is designed to fit in most indoor and outdoor dual gang electrical boxes (user sup-
plied).A dress bezel is included with the unit for trimming out rough openings in flush mount applications.
Analog door phone shall be a Bogen Model ADP1.
The door phone shall be telephone line powered
(18V DC / 20 mA minimum), answer a ring voltage of
40V AC RMS minimum, and have a ringer equivalence
number of 0.7A.
Connection shall be made via a 2-position pluggable
terminal block that is pre-wired to an RJ11 connector.
The ADP1 shall include controls for adjusting
microphone level, speaker volume, and call timer
duration.
The call timer shall be jumper defeatable.
The ADP1 shall include an auto answer feature.
The unit shall include a vandal-resistant brushed
stainless steel face plate with mounting gasket and
heavy-duty call button and a plastic cone speaker
with puncture-resistant, protective screen.
The ADP1 shall measure 5" W x 5" H x 1
3
/4" D when
fully assembled without the bezel and 6
1
/4" W x 61/4"
H x 1
3
/
4" D fully assembled with the bezel. It shall
weigh 4 lb.The ADP1 shall fit into most indoor and
outdoor dual gang electrical boxes with a minimum
clearance of 4
5
/8" W x 45/8" H x 2" D.
Architect and
Engineer
Specifications
50 Spring Street, Ramsey,NJ 07446, U.S.A.
201-934-8500 FAX: 201-934-9832
Web Site: www.bogen.com
Technical
Specifications
Power: Telephone line powered (18V DC / 20 mA minimum)
Timer Duration: 15 seconds to 2 minutes
Forward Disconnect: 300 ms minimum loop current loss
Ring Voltage: 40V AC RMS minimum
REN: 0.7A
Connections: 2-position pluggable terminal block
Earth Ground lug
Dimensions: 5" W x 5" H x 1
3
/
4" D (unit dimensions without bezel)
6
1
/
4" W x 6
1
/
4" H x 1
3
/
4" D (unit dimensions with bezel)
4
5
/8" W x 45/8" H x 2" D (min. gang box opening clearance)
Product Weight: 4 lb.
Loading...