Bogen ADP1 User Manual

Analog Door Phone Model ADP1

Installation and Use Manual

Notice

Every effort was made to ensure that the information in this manual was complete and accurate at the time of printing. However, information is subject to change.

Important Safety Information

Always follow these basic safety precautions when installing and using the system:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. DO NOT block or cover the ventilation slots and openings.

4. Never spill liquid on the product or drop objects into the ventilation slots and openings.Doing so may result in serious damage to the components.

5. Repair or service must be performed by a factory authorized repair facility.

6. DO NOT install telephone wiring during a lightning storm.

7. DO NOT install telephone jacks in a wet location unless the jack is specifically designed for wet locations.

8. Never touch uninsulated wires or terminals, unless the line has been disconnected at the paging or controller interface.

9. Use caution when installing or modifying paging or control lines.

Service Requirements

In the event of equipment malfunction, all repairs should be performed by Bogen or an authorized agent. It is the responsibility of users requiring service to report the need for service to Bogen or to one of our authorized agents. Service can be facilitated through our office at:

Bogen Communications, Inc. 50 Spring Street, Ramsey, NJ 07446, USA

Tel. 201-934-8500 Bogen’s Applications Department may be reached at: 1-800-999-2809.

Package Contents

•(1) ADP1

• (4) Hex drive screws

•(1) Hex wrench

•(1) Bezel

•(1) Bezel gasket

Description

The ADP1 is a convenient remote, weatherproof,hands-free two-way terminal device for

telephone systems.

The unit is telephone line powered and includes adjustable microphone and speaker volume levels as well as a selectable Auto Answer feature to allow for remote monitoring.

The ADP1 also includes an adjustable and defeatable call timer and can respond to

forward disconnect signals.

The ADP1 features a heavy-gauge stainless steel gasketed faceplate, plastic cone speaker,

and faceplate to electrical box (user supplied) gasketing to protect against vandals and varying weather conditions. A dress bezel is included with the unit for trimming out rough openings in flush mount applications.

+ 5 hidden pages