Page 1
Self-Amplified Drop-In Ceiling Speaker
ACD2X2, ACD2X2U
with Back Can and Recessed Volume Control
CEILING GRID
CEILING GRID
SUPPORT RAIL
CROSSBAR INCLUDED
(2 ft. X 4ft. CEILING GRID ONLY)
CEILING TILE
(CUT IN HALF, OR NO MORE
THAN 23-3⁄4")
ACD2X2
ACD2X2
2 ft. X 2ft.
TILE SPACE
2 ft. X 4ft.
TILE SPACE
Bogen’s ACD2X2 Drop-In Ceiling Speaker is a full-range
speaker that allows for fast and easy installation, which
saves installation time, effort, and cost.
The ACD2X2 is a 2' x 2' speaker that fits perfectly into
place in 2' x 2' ceiling grids – without needing to cut
ceiling tiles or requiring the use of tile support rails. The
ACD2X2 can also be easily installed in 2' x 4' ceiling grids
– just make one cut to the ceiling tile, position the support
rail (included), and drop the speaker into place.
• Finely perforated grille over the entire front of speaker
• Fully enclosed, industrial grade steel construction
• Enclosed Back Can
• Self-contained 1-watt amplifier
• 8'' main cone with secondary high-frequency cone
• Available in off-white and bright white (“U” versions)
grille finish
• Recessed Volume Control (front-mounted)
• Complies with Requirements of UL-2043
• Support Rail Crossbar (included)
Page 2
Frequency Response . . . . . . . . . . 95 Hz - 12 kHz
Max. SPL @ 1W / 1m . . . . . . . . . . 94 dB
Dispersion @ 2 kHz
(6 dB down) . . . . . . . . . . . . . . . . . .100°
Cone Material & Surround . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . .
8" main cone with secondary
high frequency cone
Maximum Amplifier Output . . . . . .1W
Typical Operational Current . . . . .1 CU (50 mA)
Input Impedance . . . . . . . . . . . . . .2000 ohms
Typical Input Sensitivity . . . . . . . . .125 mV rms
Supply Voltage . . . . . . . . . . . . . . . .24V DC
Magnet Weight . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . .Via wire nuts
(included in electrical box)
Dimensions . . . . . . . . . . . . . . . . . .23 -7/8" W x 5" H x 23 -7/8" D
Product Weight . . . . . . . . . . . . . . .12 lb.
Plenum-rated, complies with requirements of standard UL-2043.
The speaker shall be a Bogen Model ACD2X2 Drop-In Self-Amplified Ceiling Speaker, which shall be fully enclosed and constructed of industrial grade steel. It shall be comprised of a damped high-compliance factory-mounted loudspeaker that shall consist of
an 8" treated paper main cone, a secondary high frequency cone, and a 10-ounce magnet. The unit shall have a 1-watt amplifier.
The typical current consumption shall be 1 CU (50 mA). Frequency response shall be 95 Hz - 12 kHz. Input sensitivity shall be 125
mV rms with max. SPL @ 94 dB (1M). Input impedance shall be 2k ohms. Dispersion shall be 100°. The speaker shall have a nonreflective, off-white or bright white (“U” version) finish metal grille with a recessed volume control accessible through front grille.
The speaker assembly will fit into 2' x 2' and 2' x 4' ceiling grids. For 2' x 2' installations, support rails shall not be required and no
cuts to the ceiling shall be necessary. For 2' x 4' installations, a single cut to the ceiling tile and an included support rail shall be
required. The speaker shall measure 23-7/8" W x 5" H x 23-7/8" D and shall weigh 12 lb.
SPECIFICATIONS
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 Fax: 201-934-9832 www.bogen.com
Specifications subject to change without notice.
© 2006 Bogen Communications, Inc.
Part No. 54-9273-01B 0803
Self-Amplified Drop-In Ceiling Speaker: ACD2X2 & ACD2X2U
ACD2X2
ACD2X2U
Model
Off-white Finish
Bright White Finish (U)
Back Can
Recessed Volume
Control
●
●●●
●
●
Lead Color
70V Red
25V Yellow
COM Black
Loading...