Bogen 3XL Specsheet

3XL
HIGH-PERFORMANCE 350 WATTS PER CHANNEL AMPLIFIER WITH INTEGRATED DSP
THE IDEAL SOLUTION FOR OUTDOOR
AUDIO AMPLIFICATION
350 WATTS PER CHANNEL POWER AMPLIFIER WITH INTEGRATED DSP
The 3XL’s unique array of digital features allows integrators
to congure it for any combination of outdoor speakers and subwoofers. Beyond its amplication power, the 3XL allows any input to be routed to either the amplier channel or the line level output or both simultaneously.
The 3XL is a dual mono, direct-drive, transformer-less design
for maximum damping factor and precise bass control. Two separate Class-D power amplier modules, with dedicated PFC/Switched-Mode power supply, are crafted onto one chassis. Each channel operates independently in either low­impedance mode (4/8/16 Ohms) or high-impedance mode
For more information on the 3XL DSP Power Amplifier, please contact NEAR today at (855) 350-6327
or visit our website at: www.nearspeakers.com/3xl.html.
(70V/100V), allowing connection of 70/100V speakers
on one channel while simultaneously driving one or two
8-Ohm subwoofers on the other channel.
The 3XL is remarkably easy to set up and use. NEAR has thoughtfully programmed-in up to 16 DSP presets, perfectly crossed-over, equalized and power limited for the most common combinations of NEAR speakers. These are easily accessed and set via front-panel control. More
advanced users can access the full array of DSP features
through a (Graphic User Interface) GUI by connecting a computer to the 3XL using the supplied Ethernet cable.
AVAILABLE SUMMER 2017
NEAR is a Division of Bogen Communications, Inc.
3XL
350 WATTS PER CHANNEL POWER AMPLIFIER WITH INTEGRATED DSP
FEATURES
• High power output: 2 x 350W @ 4/8/16 ohms or 70V/100V
• Universal power: Switched-Mode power supply with active (Power Factor Correction) PFC and wide range input
• Class D amplier output stages with efciency up to 90%
• Protection: Self-limiting and shutdown protection circuitry including Clip, Over-current, Over/Under voltage, Output DC and Over-temperature
• Line output circuit for use in driving additional power ampliers
or other line level devices
• Excellent sonic performance with 24 bit high-end converters coupled with 48kHz/24 bit DSP sample rate
• Very low-noise, highly efcient fan cooling system
• NEAR custom DSP engine:
- 5 band parametric equalization per input channel
- 7 band parametric equalization per output channel
- Each band can be switched to Bell, Low/High Shelving, Low/High-Pass, and Notch ltering
• Crossover lters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel, Linkwitz-Riley types
• Adjustable RMS Compressor, including variable ratio and knee, for each input and adjustable Peak Limiter for each output
• Adjustable Delay time up to 960ms for every input and output channel
• Storage for 16 presets for system congurations
• Front panel interactive LCD display for local access and conguration via rotary push button control
• Flexible transformer-less output Speaker Drive mode settings for low­impedance or high-impedance applications
• Ethernet interface connection for system setup, monitoring, and control via an intuitive Windows-based GUI application for the
integrator/user
• Automatic Stand-By Mode; selectable Sleep Mode
• Accessories (sold separately): AC Power Line Cord – UK version (P/N: ACLCUK) BS 546 to IEC-320-C13 plug connectors; 1.5m length AC Power Line Cord – EU version (P/N: ACLCEU) CEE 7/7 to IEC-320-C13 plug connectors; 1.5m length
SPECIFICATIONS
 POWER & AMPLIFIER
 Number of Channels…………………………………........................…2
 Dynamic Power (6dB Crest Factor)…………….....................2 x 350W
 Input Sensitivity…………...................................................................1V
 Output Circuitry…………...........................................................Class-D
 Output Types…………......................................4/8/16-ohm, 70V, 100V
 THD @ Rated power 4 ohms (1kHz)….....0.02% (1W), 0.05% (60W),
0.08% (100W)
 S/N Ratio (20K BW)…………......................104dB ref. 70V, full power
 Frequency Response……………………...........20Hz – 20kHz ,-1.5dB
(1W, 4 ohm to 8 ohm load)
 Damping Factor………………...........>120 (4 ohms/1kHz input signal)
 Power Supply……...................................... Switched-Mode, with PFC
 Operating Range…………………......100-240 VAC (50Hz/60Hz),1.5A
 Protections………………...…Clip, Over-Current, Over/Under Voltage,
Output DC, and Over-Temperature
 Analog Input…...2 x XLR electronically balanced, 2 x RCA unbalanced
 Analog Output…...........................2 x pluggable terminal Amplier BTL,
1 x XLR electronically balanced, 1 x RCA unbalanced
GUI Application…....................Windows XP® or later, 512MB RAM min.
GENERAL
 Dimensions……………………………….....19” W x 3.5” H x 15-1/2” D
(483mm x 89mm x 394mm) - 2RU
 Weight, Net/Shipping…… . .17.7 lbs. (8.06 Kg) / 24.18 lbs. (10.97 Kg)
3XL REAR PANEL
0
OFF
DSP Power Amplifier
I
8 ABJ Drive • Gardiner, ME 04345 • USA • Tel: (855) 350-6327 • www.nearspeakers.com
NEAR is a Division of Bogen Communications, Inc.
© 2013-2017, Specications are subject to change.
Loading...