Page 1
Global LCD Panel Exchange Center
THIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BE
REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HF AND
MUST BE RETURNED TO BOE HF UPON ITS REQUEST.
www.panelook.com
PROPRIETARY NOTE
SPEC. NUMBER
PRODUCT GROUP
TFT-LCD
REV.
O
ISSUE DATE
2011.5.12
TITLE : HV320WX2-200 Open Cell
Product Specification
Rev. O
PAGE
X
OF 22
B2010-6011-O(1/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
REV
O 2011.5.12
ISSUE DATE
PAGE
OF 22
2
REVISION HISTORY
REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED
P0 Initial Release 2011.4.12
O Add two location holes in PCB 2011.5.12
踇ࢁ
躺耵㜌
B2010-6011-O(2/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
No ITEM Page
1 GENERAL DESCRIPTION 4
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
REV
O
ISSUE DATE
Contents
REVISIONS HISTORY 2
CONTENTS
1.1 Introduction
1.2 Features
1.3 Applications
2011.5.12
PAGE
3
OF 22
3
1.4 General Specification
2 ABSOLUTE MAXIMUM RATINGS 6
3 ELECTRICAL SPECIFICATIONS 7
3.1 TFT LCD Open Cell
4 INTERFACE CONNECTION 8
4.1 Open Cell Input Signal & power
4.2 LVDS Interface
5 SIGNAL TIMING SPECIFICATIONS
5.1 Timing Parameters
5.2 Signal Timing Waveform
5.3 Input Signals, Basic Display Colors & Cray Scale Of Colors
5.4 Power Sequence
6 OPTICAL SPECIFICATIONS 14
7 MECHANICAL CHARACTERISTICS 16
10
8 PRODUCT SERIAL NUMBER 17
9 PACKING INFORMATION
10 HANDING & CAUTIONS 20
11 APPENDIX 21
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
18
A4(210 X 297)
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
ISSUE DATE
2011.5.12
4
1.0 GENERAL DESCRIPTION
1.1 Introduction
HV320WX2-200 is a color active matrix TFT LCD Open cell using amorphous silicon TFT's
(Thin Film Transistors) as an active switching devices. This Open Cell has a 31.51 inch
diagonally measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel
array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical
stripe and this Open Cell can display 16.7M colors. The TFT-LCD panel used for this Open Cell
is adapted for a low reflection and higher color type.
RGB(Mini-LVDS)
VDD
+12.0V
LVDS
5pairs
LVDS_SEL
# 9
BIST_
# 27
CN1
(30pin)
Timing Controller
[LVDS Rx & Mini-LVDS
Tx integrated]
G1
Gate Driver Circuit
S1 S1366
Source Driver Circuit
TFT - LCD Panel
(1366 Ý RGB Ý 768 pixels)
PAGE
OF 22
Power Circuit
Block
G768
1.2 Features
z LVDS interface with 1 pixel / clock
z High-speed response
z Low color shift image quality
z 8-bit color depth, display 16.7M colors
z High luminance and contrast ratio, low reflection and wide viewing angle
z DE (Data Enable) only mode
z AFFS technology is applied for high display quality
z RoHS compliant
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
1.3 Application
z Home Alone Multimedia TFT-LCD TV
z Display Terminals for Control System
z High Definition TV(HD TV)
z AV application Products
1.4 General Specification
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
< Table 1. General Specifications >
REV
O
ISSUE DATE
2011.5.12
PAGE
OF 22
5
Parameter Specification Unit Remarks
Active area
Number of pixels
Pixel pitch
Pixel arrangement Pixels RGB Vertical stripe
Display colors 16.7M(8bits-true) colors
Display mode Transmission mode, Normally Black
Weight 1180 (typ.) gram
Power Consumption 3 (Typ.) Watt
Open Cell TR. 5.25 (Typ.) %
Surface Treatment Haze 10%, 3H, Semi-glare treatment
697.685(H) Ý 392.256(V)
1366(H) ശ768(V)
170.25(H) ശRGBശ510.75(V) ໃ
(Front Polarizer)
mm
pixels
At center point with
BOE module
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
REV
O
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or
damage to the unit. The operational and non-operational maximum voltage and current
values are listed in Table 2.
< Table 2. LCD Open Cell Electrical Specifications >
Parameter Symbol Min. Max. Unit Remarks
Power Supply Voltage VDD VSS-0.3 13.2 V
ISSUE DATE
2011.5.12
PAGE
OF 22
6
[VSS=GND=0V]
Ta = 25 ć
Operating Temperature T
T
Storage Temperature T
OP
SUR
ST
0+50
0+60
-20 +60
ć
ć
ć
Operating Ambient Humidity Hop 10 80 %RH
Storage Humidity Hst 10 80 %RH
Note : 1) Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 ć max. and no condensation of water.
ړڋڀ
ڑڋ
ڑڋڀ
ڏڋ
ڐڋ
ڏڋڀ
ڌڋڀ
ڪۋۀۍڼۏۄۊۉ
ڣېۈۄڿۄۏ۔ٻڶڃڀڄڭڣڸ
ڲۀۏٻڝېۇڽ
گۀۈۋۀۍڼۏېۍۀٻڶڞڸ
ڎڋ
ڍڋ
ڌڋ
ڋ
1)
ڮۏۊۍڼۂۀ
ڌڋ ڍڋ ڎڋ ڏڋ ڐڋ ڑڋ ڒڋ ړڋڋڈڍڋ
ڟۍ۔ٻڝېۇڽٻگۀۈۋۀۍڼۏېۍۀٻڶ
¶Cڸ
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
REV
O
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
3.0 ELECTRICAL SPECIFICATIONS
3.1 TFT LCD Open Cell
< Table 3. LCD Open Cell Electrical Specifications >
Val ue s
Parameter Symbol
Min Typ Max
Power Supply Input Voltage VDD 10.8 12 13.2 Vdc
Power Supply Ripple Voltage VRP 300 mV
ISSUE DATE
2011.5.12
PAGE
OF 22
7
[Ta =25ധ2 ć]
Unit Notes
Power Supply Current IDD 200 250 350 mA 1
Power Consumption PDD 3 5 Watt
Rush current IRUSH - - 2.0 A 2
Differential Input High
VLVTH +100 +300 mV
Threshold Voltage
LVDS
Interface
Differential Input Low
Threshold Voltage
VLVTL -300 -100 mV
Common Input Voltage VLVC 1.0 1.2 1.4 V
Input High Threshold
VIH 2.7 - 3.3 V
CMOS
Interface
Voltage
Input Low Threshold
VIL 0 - 0.6 V
Voltage
Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=12.0V, Frame rate=60Hz and
Clock frequency = 75.4MHz. Test Pattern of power supply current
a) Typ : Color Bar Pattern
b) Max : Skip Sub Dot Pattern(L0/L255)
2. The duration of rush current is about 2ms and rising time of Power Input is 1ms(min)
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
ISSUE DATE
Product Specification Rev. O
4.0 INTERFACE CONNECTION
4.1 Open Cell Input Signal & Power
- Connector : IS100-L30B-C23(Manufactured by UJU) or Equivalent.
< Table 4. Open Cell Input Connector Pin Configuration >
Pin No Symbol Description Pin No Symbol Description
1 VDD Power Supply +12.0V 16 RX1+ LVDS Receiver Signal(+)
2 VDD Power Supply +12.0V 17 GND Ground
3 VDD Power Supply +12.0V 18 RX2- LVDS Receiver Signal(-)
4 VDD Power Supply +12.0V 19 RX2+ LVDS Receiver Signal(+)
5 GND Ground 20 GND Ground
6 GND Ground 21 RCLK- LVDS Receiver Clock Signal(-)
7 GND Ground 22 RCLK+ LVDS Receiver Clock Signal(+)
8 GND Ground 23 GND Ground
9 LVDS_SEL ‘L’=JEIDA , ‘H’or NC= VESA 24 RX3- LVDS Receiver Signal(-)
10 NC No Connection 25 RX3+ LVDS Receiver Signal(+)
11 GND Ground 26 GND Ground
12 RX0- LVDS Receiver Signal(-) 27 BIST
13 RX0+ LVDS Receiver Signal(+) 28 NC No Connection
14 GND Ground 29 NC No Connection
15 RX1- LVDS Receiver Signal(-) 30 GND Ground
‘L’ or NC=Free run mode ,
‘H’= BIST mode
2011.5.12
PAGE
OF 22
8
Notes : 1. NC(Not Connected) : This pins are only used for BOE internal operations.
2. Input Level of LVDS signal is based on the IEA 664 Standard.
3. LVDS_SEL : This pin is used for selecting LVDS signal data format.
If this Pin : High (3.3V) or Open (NC) Æ Normal NS LVDS format
Otherwise : Low (GND) Æ JEIDA LVDS format
4. BIST : This pin is used for selecting display pattern mode when input DE or input CLOCK quits toggling.
If this Pin : Low (GND) or Open (NC) Æ Free run mode(Black Pattern)
Otherwise : High( 3.3V) Æ BIST mode(BIST Pattern)
Sequence : On = VDD LVDS Option Interface signal
Off = Interface signal LVDS Option VDD
Rear view of LCM
1
IS100-L30B-C23 (UJU)
30
BIST Pattern
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
4.2 LVDS Interface
- LVDS Receiver : Timing Controller (LVDS Rx merged)
- LVDS Data : Pixel Data
TxOUT/RxIN0
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
< Table 5. Open Cell Input Connector Pin Configuration >
LVDS Pin Vesa Data format JEIDA Data format Remark
TxIN/RxOUT0 Red0 [LSB] R2
TxIN/RxOUT1 Red1 R3
TxIN/RxOUT2 Red2 R4
TxIN/RxOUT3 Red3 R5
REV
O
ISSUE DATE
2011.5.12
PAGE
OF 22
9
TxOUT/RxIN1
TxOUT/RxIN2
TxIN/RxOUT4 Red4 R6
TxIN/RxOUT6 Red5 R7 [MSB]
TxIN/RxOUT7 Green0 [LSB] G2
TxIN/RxOUT8 Green1 G3
TxIN/RxOUT9 Green2 G4
TxIN/RxOUT12 Green3 G5
TxIN/RxOUT13 Green4 G6
TxIN/RxOUT14 Green5 G7 [MSB]
TxIN/RxOUT15 Blue0 [LSB] B2
TxIN/RxOUT18 Blue1 B3
TxIN/RxOUT19 Blue2 B4
TxIN/RxOUT20 Blue3 B5
TxIN/RxOUT21 Blue4 B6
TxIN/RxOUT22 Blue5 B7 [MSB]
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 Red6 R0 [LSB]
TxIN/RxOUT5 Red7 [MSB] R1
TxIN/RxOUT10 Green6 G0 [LSB]
TxOUT/RxIN3
TxIN/RxOUT11 Green7 [MSB] G1
TxIN/RxOUT16 Blue6 B0 [LSB]
TxIN/RxOUT17 Blue7 [MSB] B1
TxIN/RxOUT23 Reserved Reserved
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
5.0 SIGNAL TIMING SPECIFICATIONS
5.1 Timing Parameters ( DE only mode)
ITEM Symbol Min Typ Max Unit Note
CLK
Hsync
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
< Table 6. Timing Table >
Period t
CLK
Frequency - 56 75.4 85.0 MHz
Period t
Frequency f
HP
H
REV
O
11.8 13.3 17.9 ns
1450 1560 2000 t
CLK
39.4 48.4 55 KHz
ISSUE DATE
2011.5.12
PAGE
OF 22
10
Period t
VP
778 806 1200 t
HP
Vsync
Frequency f
Horizontal Active
Display Term
Vertical Active
Display Term
Notes: This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation.
Valid t
Total t
Valid t
Total t
V
HV
HP
VV
VP
47 60 65 Hz
- 1366 - t
1450 1560 2000 t
- 768 - t
778 806 1200 t
CLK
CLK
HP
HP
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 11
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
5.2 Signal Timing Waveform
tCLK
DCLK
First data
0.5 VDD
Invalid data
PRODUCT GROUP
TFT- LCD PRODUCT
Valid data
Pixel data
Pixel data
Valid data
REV
O
Invalid data
ISSUE DATE
2011.5.12
PAGE
OF 22
11
Second data
DE(Data Enable)
HSync
DE(Data Enable)
Invalid data
Pixel data
tHP
Pixel data
Invalid data
tHV
tVP
VSync
tVV
DE(Data Enable)
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
5.3 Input Signals, Basic Display Colors & Gray Scale Of Colors
Color & Gray Scale
Basic Colors
Gray Scale
of Red
Gray Scale
of Green
Gray Scale
of Blue
Gray Scale
of White
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
< Table 7. Input Signal and Display Color Table >
Input Data Signal
G6
0000000000Black
0G50G40G30G20G10
0
0
11111111111White
ୠ
ୠ
ୠ
ୠ
ୠ
ୠ
ୠ
ୠ
R6
0Darker
0
0
0
0
11111
R1 B7G7R7
000000Darker
000000Darker
00000
0R20
R0
R3
R4
R5
G0
REV
O
ISSUE DATE
2011.5.12
12
Blue DataGreen DataRed Data
0000000000011111111Red
0B60B50B40B30B20B10
000Black
1111111111
PAGE
OF 22
B0
000000000000000000000000Black
111111110000000000000000Blue
000000001111111100000000Green
1
11111111111111100000000Cyan
00000
111111110000000011111111Magenta
000000001111111111111111Yellow
111111111111111111111111White
00000000000000
000000000000000010000000
000000000000000001
000000000000000010111111Brighter
000000000000000001111111
000000000000000011111111Red
000000000000000000000000Black
000000001000000000000000
000000000100000000
000000001011111100000000Brighter
000000000111111100000000
000000001111111100000000Green
000000000000000000000000Black
100000000000000000000000
010000000000000000
101111110000000000000000Brighter
011111110000000000000000
111111110000000000000000Blue
100000001000000010000000
010000000100000001000000Darker
101111111011111110111111Brighter
011111101111111011
1
111
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
5.4 Power Sequence
To prevent a latch-up or DC operation of the Open Cell, the power on/off sequence
shall be as shown in below
wGz
}kk
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
WU`}kk
WUX}kk
W}
{X
{Y
WU`}kk
{\
WUX}kk
{]
ISSUE DATE
2011.5.12
PAGE
OF 22
13
p z
O p k P
is|GvuVvmmG
Parameter
T1 0.5 - 20 ms
T2 0 - 50 ms
T3 200 - - ms
T4 200 - - ms
}
W}
{Z {[
W}
< Table 8. Sequence Table >
Val ue s
Units
Min Typ Max
T5 0 - 50 ms
T6 1 - - s
Notes:
1. Even though T1 is over the specified value, there is no problem if I2T spec of fuse is satisfied.
2. Back Light must be turn on after power for logic and interface signal are valid.
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
ISSUE DATE
2011.5.12
PAGE
OF 22
14
6.0 OPTICAL SPECIFICATIONS
The test of Optical specifications shall be measured in a dark room (ambient luminance d 1 lux and
temperature = 25r2ć) with the equipment of Luminance meter system (Goniometer system and
TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD
surface at a viewing angle of and equal to 0q. We refer to
(the “right”),
direction (“left”) and
(= 12) as the 12 o’clock direction (“upward”),
Ø=90
(= 6 ) as the 6 o’clock direction (“bottom”). While scanning and/or Ø,
Ø=270
the center of the measuring spot on the Display surface shall stay fixed. The measurement shall be
executed after 30 minutes warm-up period. VDD shall be 12.0V +/-10% at 25qC. Optimum viewing
angle direction is 6 ’clock.
[VDD = 12.0V, Frame rate = 60Hz, Ta =25·2 ć]
(=3) as the 3 o’clock direction
Ø=0
(= 9) as the 9 o’clock
Ø=180
Parameter Symbol Condition Min Typ Max Unit Remark
Viewing
Angle
Contrast ratio CR
Reproduction
of color
Horizontal
Vertical
White
Red
Green
Blue
< Table 9. Optical Table >
3
W
W
R
R
G
G
9
12
6
x
y
x
y
x
y
CR > 10
= 0q
(center )
Normal
Viewing
Angle
B
x
with BOE
B
y
module
89 Deg.
89 Deg.
Note 1
89 Deg.
89 Deg.
900:1 1200:1 - Note 2
0.279
0.292
0.636
TYP.
0.335
TYP.
Note 3
- 0.03
0.291
+ 0.03
0.603
0.146
0.061
Response
Time
G to G T
g
- 8 10 ms Note 4
Gamma Scale 2.0 2.2 2.4
Cell Transmittance 5.25 % Note 5
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 15
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
ISSUE DATE
Product Specification Rev. O
Note :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are
determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock
direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of T= 0q and at the center of the LCD
surface. Luminance shall be measured with all pixels in the view field set first to white, then
to the dark (black) state. (See FIGURE 1 shown in Appendix) Luminance Contrast Ratio (CR)
is defined mathematically.
2011.5.12
PAGE
OF 22
15
CR =
Luminance when displaying a white raster
Luminance when displaying a black raster
3. The color chromaticity coordinates specified in Table 9. shall be calculated from the spectral
data measured with all pixels first in red, green, blue and white. Measurements shall be made
at the center of the panel.
4. Response time Tg is the average time required for display transition by switching the input
signal as FIGURE 2 shown in Appendix and is based on f
=60Hz to optimize.
V
5. Definition of Transmittance (T%) :
Module is with white(L255) signal input
Transmittance =
Luminance of LCD module
* 100%
Luminance of Backlight
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
ISSUE DATE
2011.5.12
16
7.0 MECHANICAL CHARACTERISTICS
7.1 Dimensional Requirements
FIGURE 3 (located in Appendix) shows mechanical outlines for the model HV320WX2-200.
Other parameters are shown in Table 10.
<Table 10. Dimensional Parameters>
Parameter Specification Unit
Weight 1180 (typ) gram
PAGE
OF 22
Active area
Pixel pitch 0.17(H) ശ0.51(V) mm
Number of pixels 1366(H) ശ768(V) (1 pixel = R + G + B dots) pixels
697.685(H) x 392.256(V)
mm
7.2 Semi-Glare and Polarizer Hardness.
The surface of the LCD has an semi-glare coating to minimize reflection and a coating to reduce
scratching.
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 17
Global LCD Panel Exchange Center
ڣڱڎڍڋڲڳڍڈڍڋڋ
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
8.0 PRODUCT SERIAL NUMBER
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
REV
O
ISSUE DATE
2011.5.12
PAGE
OF 22
17
1 2 3 4 5 6 7
XX X X XX X XXXX XXXXXX
1. Control Number
2. Rank / Grade
3. Line Classification
4. Year (2011 : 11, 2012 : 12, …)
5. Month (1,2,3, … , 9, X, Y, Z)
6. Internal Use
7. Serial Number
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
REV
O
ISSUE DATE
2011.5.12
PAGE
OF 22
18
9.0 PACKING INFORMATION
BOE provides the standard shipping container for customers, unless customer specifies their packing
information. The standard packing method and Barcode information are shown in below.
9.1 Packing Order
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
9.2 Packing Note
y Box Dimension : 880Lu 610Wu 250H
y Package Quantity in one Box : 12pcs
9.3 Box label
y Label Size : 108 mm (L) 56 mm (W)
y Contents
Model : HV320WX2-200
Q`ty : 12 Open Cell in one box.
Serial No. : Box Serial No. See next page for detail description.
Date : Packing Date
FG Code : FG Code of Product
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
ISSUE DATE
2011.5.12
PAGE
OF 22
19
HV320WX2-200
0000000000000
3840
00 0 0 00 0 0 00000
Type Grade Line Year Month ITEM-CODE Serial No.
12
201X.X.XX
RoHS Mark
Internal CODE
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 20
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
10.0 HANDLING & CAUTIONS
(1) Cautions when taking out the Panel
y Pick the pouch only, when taking out panel from a shipping package.
(2) Cautions for handling the panel
y As the electrostatic discharges may break the LCD Panel, handle the LCD
panel with care. Peel a protection sheet off from the LCD panel surface as
slowly as possible.
y As the LCD panel and back - light element are made from fragile glass material,
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
REV
O
ISSUE DATE
2011.5.12
PAGE
OF 22
20
impulse and pressure to the LCD panel should be avoided.
y As the surface of the polarizer is very soft and easily scratched, use a soft dry
cloth without chemicals for cleaning.
y Do not pull the interface connector in or out while the LCD panel is operating.
y Put the panel display side down on a flat horizontal plane.
y Handle connectors and cables with care.
(3) Cautions for the operation
y When the panel is operating, do not lose CLK, ENAB signals. If any one of
these signals is lost, the LCD panel would be damaged.
y Obey the supply voltage sequence. If wrong sequence is applied, the panel
would be damaged.
(4) Cautions for the atmosphere
y Dew drop atmosphere should be avoided.
y Do not store and/or operate the LCD panel in a high temperature and/or
humidity atmosphere. Storage in an electro-conductive polymer packing pouch
and under relatively low temperature atmosphere is recommended.
(5) Cautions for the panel characteristics
y Do not apply fixed pattern data signal to the LCD panel at product aging.
y Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
y Do not disassemble and/or re-assemble LCD panel.
y Do not re-adjust variable resistor or switch etc.
yWhen returning the panel for repair or etc., Please pack the panel not to be
broken. We recommend to use the original shipping packages.
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
11.0 APPENDIX
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
Figure 1. Measurement Set Up
ISSUE DATE
2011.5.12
PAGE
OF 22
21
Figure 2. Response Time Testing
ڃڧٻژٻڐڋھۈ ڄٻ
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
REV
O
SPEC. TITLE : HV320WX2-200 Open Cell Preliminary
Product Specification Rev. O
Figure 3. Open Cell Outline Dimensions (Front view)
ISSUE DATE
2011.5.12
PAGE
OF 22
22
䚯䇙ฏ
䚯䇙ฏ
B2010-6011-O(3/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Loading...