Page 1
Global LCD Panel Exchange Center
THIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BE
REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE OT AND
MUST BE RETURNED TO BOE HF UPON ITS REQUEST.
www.panelook.com
PROPRIETARY NOTE
SPEC. NUMBER
TITLE : HT260WXC-100 Product Specification
PRODUCT GROUP
TFT-LCD
Rev. P2
REV.
P2
ISSUE DATE
2011.3.23
PAGE
X
OF 27
B2010-6011-O(1/3)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
A4(210 X 297)
www.panelook.com
Page 2
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2 2011.3.23
ISSUE DATE
PAGE
OF 26
2
REVISION HISTORY
REV. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED
PO Initial Release 10.12.30 罬觥 繄
P1 胴ѻᇍᑨ Release 11.2.15 罬觥 繄
11.3.23BL CN modifyP2
蓑芡踒
B2010-6011-O(2/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
No ITEM Page
1 GENERAL DESCRIPTION
2 ABSOLUTE MAXIMUM RATINGS
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Contents
REVISIONS HISTORY
CONTENTS
1.1 Introduction
1.2 Features
1.3 Applications
1.4 General Specification
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
3
2
3
4
6
3 ELECTRICAL SPECIFICATIONS 7
4 INTERFACE CONNECTION
4.1 Module Input Signal & power
4.2 Back-light Interface Connection
4.3 LVDS Interface
5 SIGNAL TIMING SPECIFICATIONS
5.1 Timing Parameter
5.2 Signal Timing Waveform
5.3 Input Signals, Basic Display Colors & Cray Scale Of Colors
5.4 Power Sequence
6 OPTICAL SPECIFICATIONS 16
7 MECHANICAL CHARACTERISTICS
8RELIABLITY
9 PRODUCT SERIAL NUMBER 20
10 PACKING INFORMATION
11 HANDING & CAUTIONS
9
12
18
19
21
23
12 APPENDIX
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
24
www.panelook.com
Page 4
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
4
1.0 GENERAL DESCRIPTION
1.1 Introduction
HT260WXC-100 is a color active matrix TFT LCD module using amorphous silicon TFT's
(Thin Film Transistors) as an active switching devices. This module has a 26.0inch diagonally
measured active area with WXGA resolutions (1366 horizontal by 768 vertical pixel array).
Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and
this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a
low reflection and higher color type.
RGB(Mini-LVDS)
Source Driver Circuit
PAGE
OF 27
+12.0V
LVDS
5pair
Option
# 9
CN1
(30pin)
Timing Controller
[LVDS Rx & Mini-LVDS
Tx integrated]
Power Circuit
Block
1.2 Features
z LVDS Interface with 1 pixel / clock
z High-speed response
z Lower Color shift Image Quality
Gate Driver Circuit
S1 S1366
G1
TFT - LCD Panel
(1366 Ý RGB Ý 768 pixels)
G768
Back light Assembly
(4 U_CCFL)
z 6-bit Hi-FRC color depth, display 16.7M colors
z High luminance and contrast ratio, low reflection and wide viewing angle
z DE (Data Enable) only mode
z RoHS Compliant
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
1.3 Application
z Home Alone Multimedia TFT-LCD TV
z Display Terminals for Control System
z High Definition TV(HD TV)
z AV application Products
1.4 General Specification
Parameter Specification Unit Remarks
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
< Table 1. General Specifications >
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
5
Active area 575.769(W) x 323.712(H) mm
Number of pixels 1366(H) ശ768(V) pixels
Pixel pitch 140.5(H) ശRGBശ421.5(V)
Pixel arrangement Pixels RGB stripe arrangement
Display colors 16.7M(6bits + Hi FRC) colors
Display mode Transmission mode, Normally White
Outline Dimension 626.0(H) Ý 373.0(V) Ý 32.0(D) (typ.) mm
Weight 3700 (typ.) gram
Power Consumption Total 40.6Watt (Typ.) (Logic=2W,
Lamp=38.6W [I
Surface Treatment Haze 25%, 3H, Semi-glare treatment
(Front Polarizer)
=7mA] )
BL
ໃ
Watt
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
6
2.0 ABSOLUTE MAXIMUM RATINGS
The followings are maximum values which, if exceed, may cause faulty operation or
damage to the unit. The operational and non-operational maximum voltage and current
values are listed in Table 2.
< Table 2. LCD Module Electrical Specifications >
Parameter Symbol Min. Max. Unit Remarks
Power Supply Voltage VDD VSS-0.3 13 V Ta = 25 ଇ
Back-light Lamp Current IBL 6.0 9.0 mArms
Back-light Lamp Frequency FL 40 80 KHz
[VSS=GND=0V]
PAGE
OF 27
Operating Temperature T
T
Storage Temperature T
OP
SUR
ST
0+50
0+60
-20 +60
ଇ
ଇ
ଇ
Operating Ambient Humidity Hop 10 80 %RH
Storage Humidity Hst 10 80 %RH
Note : 1) Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 ఁ max. and no condensation of water.
ړڋڀ
ڑڋ
ڑڋڀ
ڲۀۏٻڝېۇڽ
گۀۈۋۀۍڼۏېۍۀٻڶڞڸ
ڎڋ
ڍڋ
ڌڋ
ڋ
ڐڋ
ڏڋ
ڏڋڀ
ڣېۈۄڿۄۏ۔ٻڶڃڀڄڭڣڸ
ڌڋڀ
1)
ڮۏۊۍڼۂۀ
ڪۋۀۍڼۏۄۊۉ
ڌڋ ڍڋ ڎڋ ڏڋ ڐڋ ڑڋ ڒڋ ړڋڋڈڍڋ
ڟۍ۔ٻڝېۇڽٻگۀۈۋۀۍڼۏېۍۀٻڶ
¶Cڸ
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
7
3.0 ELECTRICAL SPECIFICATIONS
< Table 3. LCD Module Electrical Specifications >
Parameter Symbol
Min Typ Max
Power Supply Input Voltage VDD 11.4 12 12.6 V
Power Supply Ripple Voltage VRP 300 mV
Power Supply Current IDD - 170 300 mA 1
Power Consumption of VDD PDD - 2 3.5 Watt
Rush current IRUSH - - 3.0 A 2
Values
Unit Notes
[Ta =25ധ2 ଇ]
OF 27
Differential Input High
Threshold Voltage
LVDS
Interface
CMOS
Interface
Back-light Lamp Voltage VBL 1242 1380 1518 Vrms IBL=7.0 mA
Back-light Lamp Current IBL 6.5 7.0 7.5 mArms
Back-light Lamp operating
Frequency
Lamp Start Voltage Vs
Lamp Life 50,000 - - Hrs IBL=7.0mA, 5
Power Consumption of BL
Differential Input Low
Threshold Voltage
Common Input Voltage VLVC 1.0 1.2 1.4 V
Input High Threshold
Voltage
Input Low Threshold
Voltage
VLVTH +100 mV
VLVTL -100 mV
VIH 2.7 - 3.3 V
VIL 0 - 0.7 V
FL 40 - 80 KHz 3
- - 2200 Vrms 25, 4
- - 2400 Vrms 0, 4
PBL - 38.6 - W IBL=7.0mA, 6
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
Notes :
1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for VDD=12.0V, Frame rate=60Hz
and Clock frequency = 75.4MHz. Test Pattern of power supply current
a) Typ : Black Pattern
b) Max : Sub Dot Pattern
2. The duration of rush current is about 2ms and rising time of Power Input is 1ms(min)
White : 255Gray
Black : 0Gray
Mosaic Pattern(8 x 6)
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
8
3. The frequency range can be keep within ധ10% range of electrical and optical
characteristics. (except the chromaticity)
4. Output voltage of test circuit in order to stabilize discharge in tube. Lamp and
test circuit should be left at the above standard conditions over 1Hr.
5. The lifetime is judged to be over when any situation mentioned below occurs:
When the central lamp luminance decline to 50% of the initial luminance.
When the lamp starting voltage is 10% higher than its specification
6. Calculated value for reference (VBL ശ IBL) ശ4 excluding inverter loss
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
REV
P2
ISSUE DATE
HT260WXC-100 Product Specification Rev P2
4.0 INTERFACE CONNECTION
4.1 Module Input Signal & Power
- Connector : IS100-L30B-C23(Manufactured by UJU) or Equivalent.
< Table 4. LCM Module Input Connector Pin Configuration >
Pin No Symbol Description Pin No Symbol Description
1 VDD Power Supply +12.0V 16 RX1+ LVDS Receiver Signal(+)
2 VDD Power Supply +12.0V 17 GND Ground
3 VDD Power Supply +12.0V 18 RX2- LVDS Receiver Signal(-)
4 VDD Power Supply +12.0V 19 RX2+ LVDS Receiver Signal(+)
5 GND Ground 20 GND Ground
6 GND Ground 21 RCLK- LVDS Receiver Clock Signal(-)
7 GND Ground 22 RCLK+ LVDS Receiver Clock Signal(+)
8 GND Ground 23 GND Ground
9 LVDS_SEL ‘L’=JEIDA , ‘H’or NC= VESA 24 RX3- LVDS Receiver Signal(-)
10 NC No Connection 25 RX3+ LVDS Receiver Signal(+)
11 GND Ground 26 GND Ground
12 RX0- LVDS Receiver Signal(-) 27 NC No Connection
13 RX0+ LVDS Receiver Signal(+) 28 NC No Connection
14 GND Ground 29 GND Ground
15 RX1- LVDS Receiver Signal(-) 30 GND Ground
2011.3.23
PAGE
OF 27
9
Notes : 1. NC(Not Connected) : This pins are only used for BOE internal operations.
2. Input Level of LVDS signal is based on the IEA 664 Standard.
3. LVDS_SEL : This pin is used for selecting LVDS signal data format.
If this Pin : High (3.3V) or Open (NC) Æ Normal NS LVDS format
Otherwise : Low (GND) Æ JEIDA LVDS format
Sequence : On = Vdd ᆚLVDS Option ᆚInterface signal
Off = Interface signal ᆚLVDS Option ᆚ Vdd
Rear view of LCM
1
IS100-L30B-C23 (UJU)
30
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
4.2 Back-light Interface Connection
Module Side Connector: CP0404SL000 (Cvilux) or Equivalent
User Side Connector : CP042EP1ML0-NH (Cvilux) or Equivalent
wGuU z k ~Gj
X o} oG}
Y o} oG}
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
10
4 Male connectors
CP042ESFA00 (Cvilux)
Or Equivalent
PAGE
OF 27
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
4.3 LVDS Interface
- LVDS Receiver : Timing Controller (LVDS Rx merged)
- LVDS Data : Pixel Data
TxOUT/RxIN0
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
< Table 5. LCM Module Input Connector Pin Configuration >
LVDS Pin Vesa Data format JEIDA Data format Remark
TxIN/RxOUT0 Red0 [LSB] R2
TxIN/RxOUT1 Red1 R3
TxIN/RxOUT2 Red2 R4
TxIN/RxOUT3 Red3 R5
TxIN/RxOUT4 Red4 R6
TxIN/RxOUT6 Red5 R7 [MSB]
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
11
TxOUT/RxIN1
TxOUT/RxIN2
TxIN/RxOUT7 Green0 [LSB] G2
TxIN/RxOUT8 Green1 G3
TxIN/RxOUT9 Green2 G4
TxIN/RxOUT12 Green3 G5
TxIN/RxOUT13 Green4 G6
TxIN/RxOUT14 Green5 G7 [MSB]
TxIN/RxOUT15 Blue0 [LSB] B2
TxIN/RxOUT18 Blue1 B3
TxIN/RxOUT19 Blue2 B4
TxIN/RxOUT20 Blue3 B5
TxIN/RxOUT21 Blue4 B6
TxIN/RxOUT22 Blue5 B7 [MSB]
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 Red6 R0 [LSB]
TxIN/RxOUT5 Red7 [MSB] R1
TxIN/RxOUT10 Green6 G0 [LSB]
TxOUT/RxIN3
TxIN/RxOUT11 Green7 [MSB] G1
TxIN/RxOUT16 Blue6 B0 [LSB]
TxIN/RxOUT17 Blue7 [MSB] B1
TxIN/RxOUT23 Reserved Reserved
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
5.0 SIGNAL TIMING SPECIFICATION
5.1 Timing Parameters ( DE only mode)
ITEM Symbol Min Typ Max Unit Note
CLK
Hsync
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
< Table 6. Timing Table >
Period t
CLK
Frequency - 56 75.4 85.0 MHz
Period t
Frequency f
HP
H
REV
P2
11.8 13.3 17.9 ns
1442 1560 1936 t
CLK
39.4 48.4 53 KHz
ISSUE DATE
2011.3.23
PAGE
OF 27
12
Period t
VP
778 806 888 t
HP
Vsync
Frequency f
Horizontal Active
Display Term
Vertical Active
Display Term
Notes: This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation.
Valid t
Total t
Valid t
Total t
V
HV
HP
VV
VP
50 60 65 Hz
- 1366 - t
1442 1560 1936 t
- 768 - t
778 806 888 t
CLK
CLK
HP
HP
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
5.2 Signal Timing Waveform
DCLK
tCLK
First data
Second data
0.5 VDD
Invalid data
Invalid data
PRODUCT GROUP
TFT- LCD PRODUCT
Valid data
Pixel data
Pixel data
Pixel data
Valid data
Pixel data
REV
P2
Invalid data
Invalid data
ISSUE DATE
2011.3.23
PAGE
OF 27
13
DE(Data Enable)
HSync
DE(Data Enable)
VSync
tHP
tHV
tVP
tVV
DE(Data Enable)
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
5.3 Input Signals, Basic Display Colors & Gray Scale Of Colors
Color & Gray Scale
Basic Colors
Gray Scale
of Red
Gray Scale
of Green
Gray Scale
of Blue
Gray Scale
of White
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
< Table 7. Input Signal and Display Color Table >
Input Data Signal
R0
0
G6
0G50G40G30G20G10
0
ୠ
ୠ
ୠ
ୠ
R6
e
e
it
R3
R1 B7G7R7
0
0R40R50
0R20
G0
REV
P2
ISSUE DATE
2011.3.23
14
Blue DataGreen DataRed Data
˦˦˦
˨˨˨ୠ
˦˦˦
˨˨˨ୠ
˦˦˦
˨˨˨ୠ
0B60B50B40B30B20B10
000Black
˦˦˦
˨˨˨ୠ
PAGE
OF 27
B0
000000000000000000000000Black
111111110000000000000000Blu
000000001111111100000000Green
111111111111111100000000Cyan
000000000000000011111111Red
111111110000000011111111Magenta
000000001111111111111111Yellow
111111111111111111111111White
000000000000000000000000Black
000000000000000010000000
000000000000000001000000Darker
000000000000000010111111Brighter
000000000000000001111111
000000000000000011111111Red
000000000000000000000000Black
000000001000000000000000
000000000100000000000000Darker
000000001011111100000000Brighter
000000000111111100000000
000000001111111100000000Green
000000000000000000000000Black
100000000000000000000000
010000000000000000000000Darker
101111110000000000000000Brighter
011111110000000000000000
111111110000000000000000Blue
100000001000000010000000
010000000100000001000000Darker
101111111011111110111111Brighter
01111110111111101111111
1111111111111111111111111Wh
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
www.panelook.com
REV
P2
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
5.4 Power Sequence
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
shall be as shown in below
wGz
}kk
pGz
OGpGkGP
WU`}kk
WUX}kk
W}
{X
{Y
}
W}
WU`}kk
{\
WUX}kk
{]
ISSUE DATE
2011.3.23
PAGE
OF 27
15
{Z {[
is|GvuVvmmG
W}
< Table 8. Sequence Table >
Values
Parameter
Min Typ Max
T1 0.5 - 20 ms
T2 0 - 50 ms
T3 200 - - ms
T4 200 - - ms
T5 0 - 100 ms
T6 1 - - s
Notes:
1. When the power supply VDD is 0V, Keep the level of input signals on
the low or keep high impedance.
2. Do not keep the interface signal high impedance when power is on.
3. Back Light must be turn on after power for logic and interface signal are valid.
Units
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
16
6.0 OPTICAL SPECIFICATION
The test of Optical specifications shall be measured in a dark room (ambient luminance d 1 lux and
temperature = 25r2) with the equipment of Luminance meter system (Goniometer system and
TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD
surface at a viewing angle of ɂ and Ȱ equal to 0q. We refer to ɂ
(the “right”), ɂ
direction (“left”) and ɂ
(= ɂ12) as the 12 o’clock direction (“upward”), ɂ
Ø=90
(= ɂ6) as the 6 o’clock direction (“bottom”). While scanning ɂ and/or
Ø=270
Ø, the center of the measuring spot on the Display surface shall stay fixed. The measurement shall
be executed after 30 minutes warm-up period. VDD shall be 12.0V +/-10% at 25qC. Optimum
viewing angle direction is 6 ’clock.
[VDD = 12.0V, Frame rate = 60Hz, Ta =25·2 ]
< Table 9. Optical Table >
Parameter Symbol Condition Min Typ Max Unit Remark
(=ɂ3) as the 3 o’clock direction
Ø=0
(= ɂ9) as the 9 o’clock
Ø=180
80 Deg.
80 Deg.
Note 1
80 Deg.
70 Deg.
Viewing
Angle
Horizontal
Vertical
ԭ
ԭ
ԭ
ԭ
12
3
9
6
CR > 10
Color Temperature - 10,000 K
Color Gamut 70 72 %
Contrast ratio CR
Luminance of White Y
w
600:1 800:1 - Note 2
2
340 400 -
cd/m
Note 3
White luminance uniformity Y7580%Note 4
Reproduction
of color
Response
Time
White
Red
Green
Blue
W
W
R
R
G
G
B
B
T
x
y
x
y
x
y
x
y
g
ԭ = 0q
(Center)
Normal
Viewing
Angle
TYP.
- 0.03
- 5 10 ms Note 6
0.280
0.290
0.636
0.335
0.291
0.603
0.146
0.061
TYP.
Note 5
+ 0.03
Gamma Scale 2.0 2.2 2.4
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
www.panelook.com
REV
P2
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Note :
1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are
determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock
direction with respect to the optical axis which is normal to the LCD surface.
2. Contrast measurements shall be made at viewing angle of T= 0q and at the center of the LCD
surface. Luminance shall be measured with all pixels in the view field set first to white, then
to the dark (black) state. (See FIGURE 1 shown in Appendix) Luminance Contrast Ratio
(CR) is defined mathematically.
CR =
Luminance when displaying a white raster
Luminance when displaying a black raster
ISSUE DATE
2011.3.23
PAGE
OF 27
17
3. Center Luminance of white is defined as the LCD surface. Luminance shall be measured with
all pixels in the view field set first to white. This measurement shall be taken at the locations
shown in FIGURE 2 for a total of the measurements per display.
4. The White luminance uniformity on LCD surface is then expressed as :
ԩY = ( Minimum Luminance of 5points / Maximum Luminance of 5points ) * 100
(See FIGURE 2 shown in Appendix).
5. The color chromaticity coordinates specified in Table 9. shall be calculated from the spectral
data measured with all pixels first in red, green, blue and white. Measurements shall be made
at the center of the panel.
6. The electro-optical response time measurements shall be made as FIGURE 3 shown in
Appendix by switching the “data” input signal ON and OFF. The times needed for the
luminance to change from 10% to 90% is Td, and 90% to 10% is Tr.
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
18
7.0 MECHANICAL CHARACTERISTICS
7.1 Dimensional Requirements
FIGURE 4 (located in Appendix) shows mechanical outlines for the model HT260WXC-100.
Other parameters are shown in Table 10.
<Table 10. Dimensional Parameters>
Parameter Specification Unit
Dimensional outline 626.0(H) Ý 373.0(V) Ý 32.0(D) mm
Weight 3700 (typ) gram
PAGE
OF 27
Active area 575.769(W) x 323.712(H) mm
Pixel pitch 0.4215(H) ശ0.4215(V) mm
Number of pixels 1366(H) ശ768(V) (1 pixel = R + G + B dots) pixels
Back-light Direct Light 4 U_CCFL type
7.2 Mounting
See FIGURE 5. (shown in Appendix)
7.3 Semi-Glare and Polarizer Hardness.
The surface of the LCD has an semi-glare coating to minimize reflection and a coating to reduce
scratching.
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
8.0 RELIABLITY TEST
The Reliability test items and its conditions are shown in below.
No Test Items Conditions
1
2
3
High temperature storage test Ta = 60 ଇ, 240 hrs
Low temperature storage test Ta = -20 ଇ, 240 hrs
High temperature & high humidity
operation test
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
<Table 11. Reliability Test Parameters >
Ta = 50 ଇ, 80%RH, 240hrs
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
19
4
5
6
7
8
9
High temperature operation test Ta = 50 ଇ, 240hrs
Low temperature operation test Ta = 0 ଇ, 240hrs
Thermal shock Ta = -20 ଇ಼60 ଇ (0.5 hr), 100 cycle
Vibration test
(non-operating)
Shock test
(non-operating)
Electro-static discharge test Air : ധ15kV , 50pF/330ഐ ,100Point ,1time/Point
Frequency : 10 ~ 300 Hz, Sweep rate 10 min
Gravity / AMP : 1.5 G Sine
Period : X, Y, Z 30 min
Gravity : 50G
Pulse width : 11msec, Sine wave
ധX, ധY, ധZ Once for each direction
Contact : ധ8kV , 150pF/330ഐ ,100Point , 1time/Point
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
ڣگڍڑڋڲڳڞڈڌڋڋ
www.panelook.com
PRODUCT GROUP
SPEC. NUMBER
9.0 Product Serial Number
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
TFT- LCD PRODUCT
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
20
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
21
10.0 PACKING INFORMATION
BOE provides the standard shipping container for customers, unless customer specifies their packing
information. The standard packing method and Barcode information are shown in below.
10.1 Packing Order
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
WWWWWWWWWWWW
W
YWXWUW[UY_U
]
www.panelook.com
SPEC. NUMBER
10.2 Packing Note
y Box Dimension : 740Lu 434Wu 467H
y Package Quantity in one Box : 6pcs
10.3 Box label
y Label Size : 108 mm (L) 56 mm (W)
y Contents
Model : HT2600WXC
Q`ty : 6 Module in one box.
Serial No. : Box Serial No. See next page for detail description.
Date : Packing Date
FG Code : FG Code of Product
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
22
HT260WXC- 100
WW W W WW W W WWWWWG
{GGGnGGGsGGGGGGGGGtGGGGGp{ltTjvklGGGGGz
B2010-6011-O(3/3) A4(210 X 297)
FG CODE
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
www.panelook.com
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. NUMBER
11.0 HANDLING & CAUTIONS
(1) Cautions when taking out the module
y Pick the pouch only, when taking out module from a shipping package.
(2) Cautions for handling the module
y As the electrostatic discharges may break the LCD module, handle the LCD
module with care. Peel a protection sheet off from the LCD panel surface as
slowly as possible.
y As the LCD panel and back - light element are made from fragile glass material,
impulse and pressure to the LCD module should be avoided.
y As the surface of the polarizer is very soft and easily scratched, use a soft dry
cloth without chemicals for cleaning.
y Do not pull the interface connector in or out while the LCD module is operating.
y Put the module display side down on a flat horizontal plane.
y Handle connectors and cables with care.
(3) Cautions for the operation
y When the module is operating, do not lose CLK, ENAB signals. If any one of
these signals is lost, the LCD panel would be damaged.
y Obey the supply voltage sequence. If wrong sequence is applied, the module
would be damaged.
(4) Cautions for the atmosphere
y Dew drop atmosphere should be avoided.
y Do not store and/or operate the LCD module in a high temperature and/or
humidity atmosphere. Storage in an electro-conductive polymer packing pouch
and under relatively low temperature atmosphere is recommended.
(5) Cautions for the module characteristics
y Do not apply fixed pattern data signal to the LCD module at product aging.
y Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
y Do not disassemble and/or re-assemble LCD module.
y Do not re-adjust variable resistor or switch etc.
yWhen returning the module for repair or etc., Please pack the module not to be
broken. We recommend to use the original shipping packages.
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
23
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
12.0 APPENDIX
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Figure 1. Measurement Set Up
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
24
1/4V
1/2V
3/4V
ڃڧٻژٻڐڋھۈ ڄٻ
Figure 2. White Luminance and Uniformity Measurement Locations
1/4H 1/2H 3/4H
Active Area
Test points
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
ڠۇ
ڪ
ۄ
ۇ
www.panelook.com
SPEC. NUMBER
ھڼ
ۋۏ
ڌڋڋڀ
ڔڋڀ
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Figure 3. Response Time Testing
ڣۄۂ ۃ ٻڢ ۍڼ ۔ ٻڃڝ ۍۄۂۃۏڄڧ ۊ ے ٻڢ ۍڼ ۔ ٻڃڟ ڼ ۍۆ ڄ ڧ ۊ ے ٻڢ ۍڼ ۔ ٻڃڟ ڼ ۍۆ ڄ
گہگۍ
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
25
ۀھۏۍۊڈ
ڭۀێۋۊۉێۀ
ڌڋڀ
ڋڀ
گۄۈۀ
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Figure 4. TFT-LCD Module Outline Dimensions (Front view)
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
26
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
www.panelook.com
SPEC. NUMBER
PRODUCT GROUP
TFT- LCD PRODUCT
SPEC. TITLE
HT260WXC-100 Product Specification Rev P2
Figure 5. TFT-LCD Module Outline Dimensions (Rear view)
REV
P2
ISSUE DATE
2011.3.23
PAGE
OF 27
27
B2010-6011-O(3/3) A4(210 X 297)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...