Instructions for use
Easy TENS
11
98
10
Electrode Placement
KEY: =first pair of electrodes =second pair of electrodes.
N.B. Electrodes supplied with this unit are all the same colour - the
black and white squares show suggested electrode placement only.
Frequently Asked
Questions
Is it safe?
Yes, TENS is used widely for
pain relief and is recommended
by medical professionals.
Can I use it with other
medications?
Yes. TENS is drug free so
you can use it with any
other medication including
paracetamol.
What conditions can TENS
be used to treat?
TENS can be used to treat
numerous pain conditions.
If you are unsure about using
TENS please consult your
medical adviser or contact
Body Clock Health Care on
(+44) (0)20 8532 9595.
Can I use the Easy TENS for
labour?
This is not recommended.
For information on TENS for use
during labour, please visit
www.babycaretens.com or call
(+44) (0)845 230 9737.
Troubleshooting
Questions
Why does the pulse sensation
not appear to be as strong after
you have used the Easy T ENS
for a while?
Increase the intensity, you may
have become acclimatised to a
lower setting.
Why does the pulse sensation
feel strong but ineffective?
You may need to reposition the
electrode pads (don’t forget to
switch the Easy TENS off before
doing so).
Why does the sensation not
feel sufficiently strong even on
a high setting?
The batteries may need
replacing.
Useful Information
1. If electrodes become dry,
switch off the unit, disconnect
the electrodes, and apply a
small drop of water to them.
2. Ensure the unit is switched
off before removing wires and
pads. Do not pull the wires.
ALWAYS remove the jack plug
from the socket by holding
between forefinger and thumb.
Body Clock Health Care Ltd
108 George Lane, South Woodford
London, UK E18 1AD
Tel (+44) (0)20 8532 9595
Fax (+44) (0)20 8532 9551
www.bodyclock.co.uk
e-mail customercare@bodyclock.co.uk
March 2017 (1)
Your 5 Year Guarantee
Your Easy TENS machine is
guaranteed for a period of 5 years
against manufacturer’s defects.*
0120
*The guarantee does not include leads, electrodes or battery.
Easy TENS Technical Data
Display: The LCD has a total of 13 display segments.
The array of Level Bars consists of 10 LCD Level
Bar. In addition, 2 individual LCD segments
respectively indicate the Modes (i.e. Burst
and Boost). The last LCD segment is used to
illuminate the low battery indicator.
Mode: 2 operation modes
Pulse Pulse Pattern
Frequency Width
BURST 32Hz 150µs 2 bursts per
second
8 pulses per
burst
BOOST 70Hz 150µs Constant pulse
Output Channel ONE Channel
Automatic Power Off 5 minutes
Output Voltage 0 – 55V (zero-to-peak) across
a 500Ω load; adjustable in 10 steps
Output Intensity 110 mA (max.) into a 500Ω load
Output Waveform Symmetrical Mono-phasic rectangular
Output Jacks CE Touch-proof jacks
Battery 2 X1.5V AAA Battery (Type LR03)
Battery Low Detect 2.2V±0.1V
Tolerances All output parameters are subjected to a
±10% tolerance unless other specified
EasyTENS-Manual-Mar17.indd 1 09/03/2017 12:58
6 7
3 42
5
The Easy TENS is an ultra-simple, yet powerful
digital TENS unit. It is ideal for numerous acute and
chronic pain conditions.
TENS is recognised as a safe and highly effective method of pain
relief and is regularly recommended by medical professionals.
TENS is a drug free method of pain relief, with no known side
effects. It can also be used in conjunction with any additional
medication if required.
Precautions And
Contraindications
1. Do NOT use the Easy
TENS if you have a cardiac
pacemaker.
2. Check with your medical
adviser before using if you
suffer from a heart condition,
undiagnosed pain, have
any metal implants, or any
doubts whatsoever.
3. TEN S must NOT be used
before the 37th week of
pregnancy.
4. Never use TENS to mask
undiagnosed pain since
this could require urgent
treatment.
5. If you are pregnant, do NOT
place the electrodes over
your abdomen.
General Precautions
1. Do NOT use this unit
without first reading these
instructions.
2. Do NOT immerse the Easy
TENS in any liquid.
3. Do NOT place it close to any
source of excessive heat or
operate it in the presence of
flammable gas.
4. Do NOT drop this unit onto a
hard surface.
5. Do NOT dismantle unit.
6. Only use specified
accessories.
7. If damaged, do not use.
Return to supplier.
8. Remove the batteries when
not in use.
9. Do NOT use while driving
or operating potentially
dangerous machinery or
while using a microwave.
10. Keep out of the reach of
children.
11. Do NOT place electrodes on or
near the eyes, in the mouth,
over the front or sides of
the neck, across the head,
heart, or an area of broken,
inflamed, infected or numb
skin. Electrodes are usually
applied to skin with normal
sensation unless under
medical supervision.
12. Do NOT use in the presence
of tuberculosis, malignant
tumours, very high or very
low blood pressure, high
fever or acute inflammatory
disease unless under medical
supervision.
13. A mild shock may be caused
if one electrode is accidentally
removed. In the event of this
happening the unit should be
turned off immediately.
Setting Up Your
Easy TENS
Check you have the following
contents:
• 1 x Easy TENS
• 1 x Pack of 4 self
adhesive electrodes
• 1 x Dual leadwire
• 2 x AAA batteries
• 1 x Carrying pouch
• 1 x Neck cord
The Assembly Stage
1. Slide open the battery
cover on the back of the
unit to expose the battery
compartment.
2. Insert the batteries
according to the diagram
found in the battery
compartment. Replace the
cover.
3. The dual leadwire can be
used to treat two pain areas,
or a large pain area such as
your back. See the diagrams
on pages 8 and 9.
4. Insert the plug end of the
leadwire into the jack plug
socket at the bottom of the
Easy TENS.
5. Connect the electrodes to
the pin ends of the leadwire
(see diagram below).
Insert a red and black pin (at
the end of the lead wire) into
each pair of electrodes.
Explanation of symbols
Equipment providing a particular degree of protection against
electric shock particularly regarding allowable leakage currents
having an F type (floating) applied part.
Warning - Refer to these instructions
before use.
Please keep device away from sprays of water or rain.
Denotes a product which must be disposed
of safely.
This symbol indicates the serial number of the device and
includes the year of manufacture. The serial number can be
found in the battery compartment of this device.
Contents
What is TENS? .............................................................................. 3
Precautions And Contraindications ..............................................4
Controls on the Easy TENS ........................................................... 5
Additional Functions .................................................................... 5
Setting Up Your Easy TENS ........................................................... 6
Using Your Easy TENS .................................................................. 7
Electrode Pad Placement Diagrams.............................................. 8
FAQ’s, Troubleshooting & Useful Information ............................... 10
Technical Data .............................................................................. 11
What Is TENS?
TENS (Transcutaneous Electrical Nerve Stimulation) works by
passing mild electrical impulses through the skin, into the nerve
fibres which lie below, via electrode pads. TENS impulses help your
body produce its own pain killing chemicals, such as ‘endorphins’.
What Can TENS Be Used For?
TENS can be used for many chronic and acute pain conditions
such as back pain, shoulder pain, arthritis, sciatica, sports injuries,
migraine, period pain and post-operative pain.
This unit needs special precautions regarding EMC
and needs to be installed and put into service
according to the EMC information provided in the
ACCOMPANYING DOCUMENT.
Power Key - Turns the
Easy TENS On and Off.
User Display - Indicates the
mode in use and the intensity
level (also see diagram below).
Boost Key - Used for switching
between BURST and BOOST modes.
Intensity Up - Increases
the intensity of the pulses.
Intensity Down - Decreases
the intensity of the pulses.
Controls on the Easy TENS
Additional
Functions
Low Battery Indicator
A flashing battery
symbol will be shown
on the display.
Automatic Power Off -
When the unit intensity
levels are zero, and
the Easy TENS has not
been in use for about
5 minutes, the unit will
shut off automatically.
User
Display
BURST - This
function is used
for chronic pain
conditions.
POWER BAR - This
indicates the
intensity of the
pulses from 0 to 10
for both sets of pads
BOOST - This mode
is used for acute
pain conditions.
LOW BATTERY
INDICATOR
Using Your Easy TENS
The Easy TENS has 2 TENS modes. Each has been designed to
provide a different sensation.You can use either of the TENS
modes to treat your pain.
BURST is generally used for chronic pain conditions.
BOOST is generally used for acute pain conditions.
To Commence Treatment
1. Carefully peel the electrodes from the plastic backing, using
your forefinger and thumb.
2. Position the electrodes in accordance with the instructions
provided with your electrodes or preferably from your medical
advisor.
3. Once the electrodes are positioned correctly, switch the unit
on. BURST will appear on the screen.
4. Gradually increase the intensity by using the arrow UP key,
until the sensation is comfortable. Intensity can be reduced
by using the arrow DOWN key.
To switch to the BOOST mode simply press the BOOST button
and start the process again. To return back to the BURST mode,
press the BOOST button again.
Before first use of the Easy TENS, please familiarise
yourself with the warnings and contraindications
contained on page 10.
EasyTENS-Manual-Mar17.indd 2 09/03/2017 12:58
Loading...