Bobrick TerraDry QuietDry, TerraDry QuietDry B-7188, TerraDry QuietDry B-7180 Installation Instructions Manual
Installation Instructions
B-7180 & B-7188
QuietDry™ Series, TerraDry™
Surface-Mounted
Automatic Hand Dryer
Installation Instructions Surface-Mounted Hand Dryer ...............................................Pages 2 & 3
Instrucciones De Instalación Secadores De Manos Bobrick
Montados Sobre La Pared Tipo ......................................................................................Pages 4 & 5
Einbauanleitung Bobrick -Hände
Für Aufputzmontage ......................................................................................................Pages 6 & 7
Notice D’Installation Sèche-Mains Bobrick
Montés En Surface ..........................................................................................................Pages 8 & 9
Istruzioni Per L’installazione Asciugamani Bobrick ................................................Pages 10 & 11
表面安装式自动感应干手机/干发机安装说明书 ................................................Pages 12 & 13
Warranties ...................................................................................................................Pages 14 & 15
Form No. 7180-7188-69_ii Multi Language (Revised 2/3/16) © 2016 Bobrick Washroom Equipment, Inc. Printed in U.S.A.
1
A
B
C
Electrical Characteristics
Hand dryer models B-7180 or B-7188115V AC, 20 Amp, 50/60 Hz, Single Phase, cULus listed;
Hand dryer models B-7180 or B-7188 208-240V AC, 9-10 Amp, 50/60 Hz, Single Phase, cULus listed and CE marked.
Recommended Mounting Heights
Distance from floor to bottom mounting screw holes of mounting base. (Dimension A)
Hand Dryer
Men's Washrooms .............................................................................................................................................................46'' (117cm)
Women's Washrooms ........................................................................................................................................................44'' (112cm)
Children's Washrooms, ages 3-9 ......................................................................................................................................32'' (81cm)
Children's Washrooms, ages 9-12 .....................................................................................................................................36'' (91cm)
Children's Washrooms, ages 12-15 ...................................................................................................................................40'' (102cm)
Children's Washrooms, ages 15-18 ...................................................................................................................................44'' (112cm)
For the Handicapped .........................................................................................................................................................38'' (97cm)
* Bobrick automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with
the operation of the automatic sensor.
Important
* Warm air hand dryer. Intended for use in a household environment by non-expert users. Not suitable for outdoor use.
** This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
*** If a fault develops disconnect the electrical supply, a qualified electrician should be called.
Removal of Cover
1. Start installation of dryer by
removing cover. To loosen
two cover bolts, insert Allen
Wrench (provided with dryer)
into holes located on bottom
x 2
of cover on each side of air
intake grille. Make sure
wrench fits into head
of cover bolts and turn
1
2
CLOCKWISE until bolts stop
turning. When cover bolts
are screwed out all the way,
cover can be removed.
Installation of Mounting Base
FOR PROPER ELECTRICAL CONNECTIONS, CHECK LOCAL
BUILDING CODE. UNIT MUST BE INSTALLED BY
A QUALIFIED LICENSED ELECTRICIAN
1. Hold the Installation Template against the wall in the desired
location of the installed dryer. See recommended mounting
heights above.
2. Make sure line on template representing bottom of dryer
mounting base is horizontal and located at the desired height
above floor.
NOTE: Surface-mounted electrical supply entry is located in the
lower right corner of the mounting base. Surface-mounted supply
cable should be fitted in a conduit.
3. Drill four holes for 1/4" (6.4mm) diameter mounting bolts or
screws (not furnished by Bobrick).
4. Fasten mounting base securely to wall.
2
Form No. 7180-7188-69_ii Multi Language (Revised 2/3/16) © 2016 Bobrick Washroom Equipment, Inc. Printed in U.S.A.
2. To remove cover, place a
hand on each side of cover
A
and push up toward top
of dryer releasing cover
from studs at top of
mounting base. Lift cover
off mounting base by
C
pulling forward at the
bottom and upward at the
same time.
C
L
A
x 2
C
B
1
2
AB
1
>
0.5m
X
{
X
9
x 2
1.
4
8mm
2.
3.
C
L
3
B
C
L
x 4
B
A
A
3
WARNING: TURN ELECTRICAL POWER SUPPLY OFF
BEFORE MAKING ELECTRICAL CONNECTIONS. DRYER
MUST BE GROUNDED (EARTHED).
B
Loading...