Page 1
vANdAL-RESISTANT
Technical Data
S
7-3/4''
195mm
CLOTHES HOOK STRIP
(SECUREd FROM FRONT)
S
5-1/2''
140mm
3''
75mm
S
S
18''
455mm
7-3/4''
195mm
S
1-1/4''
30mm
Typ.
Finish Face of Wall
7/8''
22mm
Faceplate
1-1/4''
30mm
B-985
965-1220mm
38''-48''
for Barrier-Free Design
Recommended Mounting Height off Floor
MATERIALS:
18-8 S, type-304 stainless steel with satin finish. Faceplate is 14-gauge (2mm). Hooks snap down for safety if excessively loaded.
INSTALLATION:
Secure unit to wall at all points indicated by an S. Unit has countersunk screw holes and is furnished with six 1/4 –20 x 1½ ''
(6 x 38mm), tamper-resistant, flat-head, hex-socket, stainless steel machine screws and a security hex key for installation.
Expansion shields are not furnished by manufacturer.
SPECIFICATION:
Clothes hook strip shall be type-304 stainless steel with satin finish. Faceplate shall be 14-gauge (2mm) and equipped with
four hooks shall snap down for safety if excessively loaded. Unit shall be furnished with tamper-resistant mounting screws.
Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Clothes Hook Strip shall be Model B-985 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson,
Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough Ontario; Bobrick Washroom
Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.
Loading...