VANdAL-RESISTANT
Technical Data
S
2-3/4''
70mm
4''
100mm
S
CLOThES hOOk
(SECuREd FROM FRONT)
Finish Face of Wall
7/8''
Faceplate
22mm
B-983
965-1015mm
5/8''
16mm
MATERIALS:
18-8 S, type-304 stainless steel with satin finish. Faceplate is 14-gauge (2mm). Hook snaps down for safety if excessively loaded.
INSTALLATION:
Secure unit to wall at all points indicated by an S. Unit has countersunk screw holes and is furnished with four 1/4–20 x 1½''
(6 x 40mm), tamper-resistant, flat-head, hex-socket, stainless steel machine screws and a security hex key for installation.
Expansion shields are not furnished by manufacturer.
SPECIFICATION:
Clothes hook shall be type-304 stainless steel with satin finish. Faceplate shall be 14-gauge (2mm). Hook shall snap down for
safety if excessively loaded. Unit shall be furnished with tamper-resistant mounting screws. Manufacturer's service and par ts
manual shall be provided to the building owner/manager upon request.
Clothes Hook shall be Model B-983 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough Ontario; Bobrick Washroom
Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
1-1/4''
30mm
38”-40”
for Barrier-Free Design
Recommended Mounting Height off Floor
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/07 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2007 by Bobrick Washroom Equipment, Inc.
Loading...