Bobrick B-8397 User Manual

Finish Face of Wall

2-1/4''

55mm

S

S

5-3/16''

130mm

3''

75mm

25/32''

20mm

S

S

8-11/16''

220mm

10-1/4''

260mm

25/32''

20mm

SuRfAcE-MOunTEd

Technical Data

fAcIAL TISSuE

dISpEnSER

B-8397

MATERIALS:

Cabinet — 18-8 S, type-304, 24-gauge (0.6mm) stainless steel. All-welded construction. Exposed sur faces have satin finish.
Equipped with a concealed locking device; opens with special key provided. Secured to concealed wall plate with pivot hinges.
Capacity: one box of 100 two-ply facial tissues.

Wall Plate — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel.

OpERATIOn:

Cabinet unlocks with special key provided, then swings down to replace box of 100 two-ply facial tissues.

InSTALLATIOn:

Mount unit on wall or countertop apron with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indi­cated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure
unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws,
or provide 1/8" (3mm) toggle bolts or expansion bolts.

Note: Provide a 2-1/4" (55mm) minimum clearance above unit to provide access to lock and 2-1/4" (55mm) clearance below
unit to allow tissue dispenser to swing down for refilling.

SpEcIfIcATIOn:

Surface-mounted facial tissue dispenser shall be type-304 stainless steel with all-welded constr uction; exposed surfaces shall
have satin finish. Cabinet shall be secured to a concealed wall plate with pivot hinges and equipped with a concealed locking
device that is opened only with special key provided. Unit shall hold one box of 100 two-ply facial tissues. Manufacturer’s
service and parts manual shall be provided to the building owner/manager upon request.

Surface-Mounted Facial Tissue Dispenser shall be Model B-8397 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 R/A Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.