Technical Data
7-1/4''
185mm
2''
50mm
Typ.
3-5/16''
85mm
5-1/4''
135mm
Support Arm
Flange and
Mounting Bracket
Setscrew
Concealed Wall Plate
Finish Face of Wall
S
S
3-15/16''
100mm
1/2''
13mm
2''
50mm
Typ.
Recommended Mounting Height Off Floor
For Universal / Barrier-Free Design
20''
510mm
Specify Model Required: Model B-7685 Bright polished stainless steel
Model B-76857 Satin-finish stainless steel
SINgLE-ROLL
STAINLESS STEEL
TOILET TISSuE dISPENSER
B-7685
B-76857
MATERIAL:
Flanges & Support Arms (2) -— 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Each flange has a concealed, 18-gauge
(1.2mm) stainless steel mounting bracket. All-welded construction. Secured to wall plates with stainless steel setscrews.
Concealed Wall Plates (2) — 18-8 S, type-304, 19-gauge (1.0mm) stainless steel.
Spindle — Chrome-plated plastic. Equipped with heavy-duty internal spring.
INSTALLATION:
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate with
prongs at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting
brackets onto prongs of wall plates, then secure unit into position by tightening setscrews at bottom of flanges.
Note: Centerline-to-centerline of concealed wall plates must be within 1/16'' (1.6mm) of dimension shown.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall sur faces, provide fiber plugs or expansion shields for use with sheet-metal screws
furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
For partitions with par ticle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be
secured.
SPECIFICATION:
Single-roll toilet tissue dispenser shall be type-304 stainless steel with __________ (insert one: bright polished or satin) finish.
Unit shall accommodate one standard-core toilet paper roll up to 5-1/2'' (140mm) diameter (1800 sheets). Flanges and support
arms shall be 22 gauge (0.8mm) and equipped with concealed, 18-gauge (1.2mm) mounting brackets that are secured to
concealed, 19-gauge (1.0mm) wall plates with stainless steel setscrews.
spring. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
c
Designer's Note: Theft-resistant toilet tissue spindles, which require special key for removal, are available as an optional accessory.
To specify, add suffix .60 to model number. Example: B-7685.60.
Single-Roll Toilet Tissue Dispenser shall be Model __________ (insert model number) of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
c
Spindle shall be equipped with a heavy-duty internal
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited,
United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...