surface-mounted
b-7671
Technical Data
Specify Model Required: Model B-7671 Bright polished stainless steel
Model B-76717 Satin-finish stainless steel
1-5/8''
40mm
robe hook
2''
50mm
Typ.
13/16''
21mm
1-5/8''
40mm
1/2''
13mm
Setscrew
b-76717
Finish Face
of Wall
S
S
Concealed Wall Plate
965 to 1015mm
38'' to 40''
Recommended Mounting Height
Off Floor for Barrier-Free Design
materials:
Flange & Support Arm — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 18-gauge (1.2mm) stainless steel
mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.
Concealed Wall Plate — 18-8 S, type-304, 19-gauge (1.0mm) stainless steel.
Cap — 18-8 S, type-304, 14-gauge (2.0mm) stainless steel. Welded to the support arm.
installation:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at
top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto
prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall sur faces, provide fiber plugs or expansion shields for use with screws furnished,
or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with par ticle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be
secured.
specification:
Surface-mounted robe hook shall be type-304 stainless steel with __________ (insert one: bright polished or satin) finish.
Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting bracket that is
secured to a concealed, 19-gauge (1.0mm) wall plate with a stainless steel setscrew. Cap shall be 14 gauge (2.0mm), welded to
the support arm. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
Surface-Mounted Robe Hook shall be Model __________ (inser t model number) of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/06 R/A Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Loading...