PRODUCT SPECIFICATION
Surface-mounted ADA Dryer, Bobrick Model B-7128 (Stainless
Steel).
Surface-mounted hand dryer shall have 18-gauge, Type-304
stainless steel with #4 satin-finish vertical grain cover with UL
94-5VA black plastic trim. Slim profile cover shall project no more
than 4" (100mm) from the finished face of wall to comply with
barrier-free accessibility guidelines (including ADAAG in the
U.S.A.). Unit shall be equipped with uniquely designed (patent
pending) dual air outlets that provide a swirling circulation of
airflow for (less than 25 seconds) hand dry. Motor shall be 1/7 hp,
universal type on resilient mounting with sealed ball bearing at
drive-shaft end and self-lubricating sleeve bearing at nondrive end;
equipped with automatic thermal-overload switch. Heating
elements shall be located on outlet side of fan, shall heat air without
hot spots, be inaccessible to vandals, and protected by an automatic
thermal-overload switch. Electronic sensor shall automatically turn
dryer on when hands are held under air-outlet opening and across
path of sensor. Dryer shall turn off automatically when hands are
removed. Sensor shall automatically shut dryer off approximately
1-1/2 minutes after dryer turns on if an inanimate object is placed
across air-outlet opening. After inanimate object is removed,
electronic sensor shall automatically reset itself and dryer shall
operate normally. Unit shall be cULus Listed, and/or VDE
approved, CE marked. Unit shall comply with EU Directive
"Restriction of Hazardous Substance" (ROHS) requirements for
non-use of certain hazardous substances in the production of
electronic products. Unit shall be protected by a limited 10 -year
warranty on all parts except motor brushes. Motor brushes shall be
warranted for three years from date of purchase.
PSB-7128 i021010
Loading...