PRODUCT SPECIFICATION
Surface-mounted automatic hand dryer, Bobrick Model B-708.
Surface-mounted hand dryer shall have a one-piece cast-iron cover
finished in high-gloss, multicoat vitreous enamel. Nozzle shall
adjust for hand and face drying. International graphic operating
symbols shall be permanently fused into vitreous enamel cover.
Cover shall have no exposed air inlet grille. Motor shall be 1/10 hp,
6200 rpm, with automatic thermal overload switch. Heating element
shall be rated at 2300 watts, shall be located on inlet side of fan, shall
heat air without hot spots, and be inaccessible to vandals. Electronic
sensor shall automatically turn dryer on when hands or nozzle are
held under the outlet and will shut off automatically when hands or
nozzle are removed. Electronic sensor shall shut off automatically
after 90 seconds if an inanimate object is used to activate dryer and
resets itself after inanimate object is removed. Unit shall be cULus
Listed and or VDE approved, CE marked. Unit shall comply with
EU Directive “Restriction of Hazardous Substance” (ROHS)
requirements for non-use of certain hazardous substances in the
production of electronic products. Unit shall be protected by a
limited 10-year warranty on all parts except motor brushes. Motor
brushes shall be warranted for a period of three years from date of
purchase.
Loading...