PRODUCT SPECIFICATION
Stainless steel grab bar. 1-1/2" (38mm) diameter, with snap
flange cover, Horizontal two-wall 36" x 54" (914 x 1372mm),
Bobrick Model B-68137
Grab bar and concealed mounting plates shall be constructed of
type-304 stainless steel with satin finish (or satin finish with
peened gripping surface; add .99 suffix to model number). Grab
bar shall have wall thickness of 18-gauge (1.2mm) and outside
diameter of 1-1/2" (38mm). Distance from inside of grab bar to
finished wall shall be 1-1/2" (38mm). Flanges shall be 1/8"
(3mm) thick stainless steel plate, 2" x 3-1/8" (50 x 80mm) in
diameter, and each shall have two screws holes. Flange covers
shall be 11-gauge (0.8mm) and shall snap over mounting flanges to
conceal mounting screws. Grab bar shall have 90° return to
flange. Ends of grab bar shall pass through flanges and be heliarc
welded to form one structural unit.
Loading...