PRODUCT SPECIFICATION
Stainless steel grab bar, 1-1/2" (38mm) diameter, with snap
flange cover, Bobrick Series B-6806.
Grab bar and concealed mounting plates shall be constructed of
type-304 stainless steel with satin finish (or satin finish with
peened gripping surface; add .99 suffix to model number). Grab
bar shall have wall thickness of 18-gauge (1.2mm) and outside
diameter of 1-1/2" (38mm). Distance from inside of grab bar to
finished wall shall be 1-1/2" (38mm). Flanges shall be 1/8"
(3mm) thick stainless steel plate, 2" x 3-1/8" (79mm) in diameter,
and each shall have two screws holes. Flange covers shall be
11-gauge (0.8mm) and shall snap over mounting flanges to conceal
mounting screws. Grab bar shall have 90ยบ return to flange.
Ends of grab bar shall pass through flanges and be heliarc welded
to form one structural unit.
Loading...