Bobrick B-669 User Manual
6-1/8''
155mm
5''
125mm
6-1/8''
155mm
Finish Face of Wall
2-3/4''
70mm
1-7/8''
50mm
5''
125mm
Mounting Clamp
Countersunk
Mounting
Holes (2)
9/16''
15mm
Typ.
recessed toilet tissue
B-669
dispenser with hood
Technical Data
(for stud walls or countertop aprons)
Specify Model Required: Model B-669 Bright polished stainless steel
Model B-6697 Satin-finish stainless steel
materials:
Shell and Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn and beveled, one-piece, seamless construction
with two countersunk mounting holes.
Support Posts (2) — Heavy-duty cast zamac with chrome-plated finish.
Hood — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel. Hood hinged to shell.
Mounting Bracket — Plated-steel mounting clamp attaches to back of unit with two sheet-metal screws for installation in stud
walls or countertop aprons.
Spindle — Chrome-plated plastic. Equipped with heavy-duty internal spring.
Designer's Note: Theft-resistant toilet tissue spindle, which is removable only with special key provided, is available as an
optional accessory. To specify, add suffix .60 to model number. Example: B-669.60.
B-6697
Rough Opening
5-1/2" (140mm) wide
5-1/4" (135mm) high
3-3/8" (86mm) minimum
recessed depth
installation:
Provide framed rough opening 5-1/2" wide x 5-1/4" high (140 x 135mm). Minimum recessed depth required from finish face of
wall or apron is 3-3/8" (86mm).
For installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with
mounting screws. Insert into rough opening. Adjust mounting clamp so it grips surface inside rough opening. Secure in place
by tightening two mounting screws.
For installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only
into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.
specification:
Recessed toilet tissue dispenser shall be type-304 stainless steel with __________ (insert one: bright polished or satin) finish.
Shell and flange shall be drawn and beveled, one-piece, seamless construction. Unit shall be equipped with 18-gauge (1.2mm)
hood hinged to shell and furnished with plated-steel mounting clamp for installation in stud walls or countertop aprons.
*Spindle shall be chrome-plated plastic with a heavy-duty internal spring. Manufacturer's ser vice and parts manual shall be
provided to the building owner/manager upon request.
*To specify theft-resistant spindle as an optional accessory, add to specification: Theft-resistant toilet tissue spindle shall be
removable only with special key provided.
Recessed Toilet Tissue Dispenser With Hood shall be Model __________ (insert model number) of Bobrick Washroom
Equipment, Inc. Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.