Bobrick B-6637 User Manual

Technical Data

recessed

toilet tissUe dispenser

with storage space

for extra roll

B-663
B-6637

Specify Model Required:

 Model B-663 Bright polished stainless steel
 Model B-6637 Satin-finish stainless steel

Finish Face of Wall

6-1/4''

160mm

5-1/8''

130mm

6-1/4''

160mm

9/16''

14mm

Typ.

2-15/16''

75mm

1/8''

3mm

1-3/8''

35mm

Rough Opening

5-1/2" (140mm) wide
5-1/2" (140mm) high

4" (100mm) minimum recessed depth

S

3-15/16''

100mm

5-5/16''

135mm

22-1/8" 560mm

for Universal / Barrier-Free Design

Recommended Mounting Height Off Floor

materials:

Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction.

Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction.

Support Posts (2) — Heavy-duty cast zamak with chrome-plated finish.

Spindle — Chrome-plated plastic equipped with heavy-duty internal spring.

Designer's Note: Theft-resistant toilet tissue spindle, which is removable only with special key provided, is available as an
optional accessory. To specify, add suffix .60 to model number. Example: B-663.60.

installation:

Provide framed rough wall opening 5-1/2" wide x 5-1/2" high (140 x 140mm). Minimum recessed depth required to finish face
of wall is 4" (100mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, then provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount cabinet with shims between
framing and cabinet at all points indicated by an S, then secure unit with screws furnished by manufacturer.

specification:

Recessed toilet paper holder shall be type-304 stainless steel with __________ (insert one: bright polished or satin) finish.
Flange shall be drawn, one-piece seamless construction.
spring. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.

*

To specify theft-resistant spindle as an optional accessory, add to specification: Theft-resistant toilet tissue spindle shall be

removable only with special key provided.

Recessed Stainless Steel Toilet Paper Holder shall be Model __________ (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and
Bobrick Washroom Equipment Limited, United Kingdom.

*

Spindle shall be chrome-plated plastic with a heavy-duty internal

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.